Fix broken doxygen reference in last commit.

[pub/USBasp.git] / Demos / Device / MIDI / MIDI.c

diff --git a/Demos/Device/MIDI/MIDI.c b/Demos/Device/MIDI/MIDI.c
index 7e1d211..b6b43df 100644 (file)
--- a/Demos/Device/MIDI/MIDI.c
+++ b/Demos/Device/MIDI/MIDI.c
@@ -58,7 +58,7 @@ int main(void)
        /* Hardware Initialization */\r
        Joystick_Init();\r
        LEDs_Init();\r
-       HWB_Init();\r
+       Buttons_Init();\r
 \r
        /* Indicate USB not ready */\r
        UpdateStatus(Status_USBNotReady);\r
@@ -74,7 +74,7 @@ int main(void)
 }\r
 \r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */\r
-EVENT_HANDLER(USB_Connect)\r
+void EVENT_USB_Connect(void)\r
 {\r
        /* Start USB management task */\r
        Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);\r
@@ -86,7 +86,7 @@ EVENT_HANDLER(USB_Connect)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.\r
  */\r
-EVENT_HANDLER(USB_Disconnect)\r
+void EVENT_USB_Disconnect(void)\r
 {\r
        /* Stop running audio and USB management tasks */\r
        Scheduler_SetTaskMode(USB_MIDI_Task, TASK_STOP);\r
@@ -99,7 +99,7 @@ EVENT_HANDLER(USB_Disconnect)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration\r
  *  of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.\r
  */\r
-EVENT_HANDLER(USB_ConfigurationChanged)\r
+void EVENT_USB_ConfigurationChanged(void)\r
 {\r
        /* Setup MIDI stream endpoints */\r
        Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK,\r
@@ -134,8 +134,8 @@ TASK(USB_MIDI_Task)
                uint8_t JoystickStatus  = Joystick_GetStatus();\r
                uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus);\r
                \r
-               /* Get HWB status - if set use channel 10 (percussion), otherwise use channel 1 */\r
-               uint8_t Channel = ((HWB_GetStatus()) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));\r
+               /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */\r
+               uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1));\r
 \r
                if (JoystickChanges & JOY_LEFT)\r
                  SendMIDINoteChange(0x3C, (JoystickStatus & JOY_LEFT), 0, Channel);\r