-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2010.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this \r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in \r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting \r
- documentation, and that the name of the author not be used in \r
- advertising or publicity pertaining to distribution of the \r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- * \brief Master include file for the board LEDs driver.\r
- *\r
- * This file is the master dispatch header file for the board-specific LED driver, for boards containing user\r
- * controllable LEDs.\r
- *\r
- * User code should include this file, which will in turn include the correct LED driver header file for the\r
- * currently selected board.\r
- *\r
- * If the BOARD value is set to BOARD_USER, this will include the /Board/LEDs.h file in the user project\r
- * directory.\r
- */\r
-\r
-/** \ingroup Group_BoardDrivers\r
- * @defgroup Group_LEDs LEDs Driver - LUFA/Drivers/Board/LEDs.h\r
- *\r
- * \section Sec_Dependencies Module Source Dependencies\r
- * The following files must be built with any user project that uses this module:\r
- * - None\r
- *\r
- * \section Module Description\r
- * Hardware LEDs driver. This provides an easy to use driver for the hardware LEDs present on many boards. It\r
- * provides an interface to configure, test and change the status of all the board LEDs.\r
- *\r
- * If the BOARD value is set to BOARD_USER, this will include the /Board/Dataflash.h file in the user project\r
- * directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value\r
- * is set to BOARD_NONE, this driver is silently disabled.\r
- *\r
- * \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If\r
- * a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.\r
- * If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D \r
- * switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when\r
- * a non-existing LED is referenced in application code. Note that this means that it is possible to make\r
- * compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)\r
- * which contains only stub functions and defines no LEDs.\r
- *\r
- * @{\r
- */\r
-\r
-#ifndef __LEDS_H__\r
-#define __LEDS_H__\r
-\r
- /* Macros: */\r
- #if !defined(__DOXYGEN__)\r
- #define __INCLUDE_FROM_LEDS_H\r
- #define INCLUDE_FROM_LEDS_H\r
- #endif\r
- \r
- /* Includes: */\r
- #include "../../Common/Common.h"\r
-\r
- #if (BOARD == BOARD_NONE)\r
- static inline void LEDs_Init(void) {};\r
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) {};\r
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) {};\r
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) {};\r
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) {};\r
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) {};\r
- static inline uint8_t LEDs_GetLEDs(void) { return 0; }\r
- #elif (BOARD == BOARD_USBKEY)\r
- #include "USBKEY/LEDs.h"\r
- #elif (BOARD == BOARD_STK525)\r
- #include "STK525/LEDs.h"\r
- #elif (BOARD == BOARD_STK526)\r
- #include "STK526/LEDs.h"\r
- #elif (BOARD == BOARD_RZUSBSTICK)\r
- #include "RZUSBSTICK/LEDs.h"\r
- #elif (BOARD == BOARD_ATAVRUSBRF01)\r
- #include "ATAVRUSBRF01/LEDs.h"\r
- #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))\r
- #include "XPLAIN/LEDs.h"\r
- #elif (BOARD == BOARD_BUMBLEB)\r
- #include "BUMBLEB/LEDs.h"\r
- #elif (BOARD == BOARD_EVK527)\r
- #include "EVK527/LEDs.h"\r
- #elif (BOARD == BOARD_TEENSY)\r
- #include "TEENSY/LEDs.h"\r
- #elif (BOARD == BOARD_USBTINYMKII)\r
- #include "USBTINYMKII/LEDs.h"\r
- #elif (BOARD == BOARD_BENITO)\r
- #include "BENITO/LEDs.h"\r
- #elif (BOARD == BOARD_USER)\r
- #include "Board/LEDs.h"\r
- #endif\r
- \r
- #if !defined(LEDS_LED1)\r
- #define LEDS_LED1 0\r
- #endif\r
-\r
- #if !defined(LEDS_LED2)\r
- #define LEDS_LED2 0\r
- #endif\r
-\r
- #if !defined(LEDS_LED3)\r
- #define LEDS_LED3 0\r
- #endif\r
-\r
- #if !defined(LEDS_LED4)\r
- #define LEDS_LED4 0\r
- #endif\r
- \r
- /* Pseudo-Functions for Doxygen: */\r
- #if defined(__DOXYGEN__)\r
- /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port\r
- * I/O pins as outputs, and sets the LEDs to default to off.\r
- */\r
- static inline void LEDs_Init(void);\r
-\r
- /** Turns on the LEDs specified in the given LED mask.\r
- *\r
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)\r
- */\r
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask);\r
-\r
- /** Turns off the LEDs specified in the given LED mask.\r
- *\r
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)\r
- */\r
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask);\r
-\r
- /** Turns off all LEDs not specified in the given LED mask, and turns on all the LEDs in the given LED\r
- * mask.\r
- *\r
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)\r
- */\r
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask);\r
-\r
- /** Turns off all LEDs in the LED mask that are not set in the active mask, and turns on all the LEDs\r
- * specified in both the LED and active masks.\r
- *\r
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)\r
- * \param[in] ActiveMask Mask of whether the LEDs in the LED mask should be turned on or off\r
- */\r
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask);\r
- \r
- /** Toggles all LEDs in the LED mask, leaving all others in their current states.\r
- *\r
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)\r
- */\r
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask);\r
-\r
- /** Returns the status of all the board LEDs; set LED masks in the return value indicate that the\r
- * corresponding LED is on.\r
- *\r
- * \return Mask of the board LEDs which are currently turned on\r
- */\r
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;\r
- #endif\r
-\r
-#endif\r
-\r
-/** @} */\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2012.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief LED board hardware driver.
+ *
+ * This file is the master dispatch header file for the board-specific LED driver, for boards containing user
+ * controllable LEDs.
+ *
+ * User code should include this file, which will in turn include the correct LED driver header file for the
+ * currently selected board.
+ *
+ * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/LEDs.h file in the user project
+ * directory.
+ *
+ * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
+ */
+
+/** \ingroup Group_BoardDrivers
+ * \defgroup Group_LEDs LEDs Driver - LUFA/Drivers/Board/LEDs.h
+ * \brief LED board hardware driver.
+ *
+ * \section Sec_Dependencies Module Source Dependencies
+ * The following files must be built with any user project that uses this module:
+ * - None
+ *
+ * \section Sec_ModDescription Module Description
+ * Hardware LEDs driver. This provides an easy to use driver for the hardware LEDs present on many boards. It
+ * provides an interface to configure, test and change the status of all the board LEDs.
+ *
+ * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/LEDs.h file in the user project
+ * directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
+ * is set to \c BOARD_NONE, this driver is silently disabled.
+ *
+ * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
+ *
+ * \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
+ * a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
+ * If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D
+ * switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
+ * a non-existing LED is referenced in application code. Note that this means that it is possible to make
+ * compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
+ * which contains only stub functions and defines no LEDs.
+ *
+ * \section Sec_ExampleUsage Example Usage
+ * The following snippet is an example of how this module may be used within a typical
+ * application.
+ *
+ * \code
+ * // Initialize the board LED driver before first use
+ * LEDs_Init();
+ *
+ * // Turn on each of the four LEDs in turn
+ * LEDs_SetAllLEDs(LEDS_LED1);
+ * Delay_MS(500);
+ * LEDs_SetAllLEDs(LEDS_LED2);
+ * Delay_MS(500);
+ * LEDs_SetAllLEDs(LEDS_LED3);
+ * Delay_MS(500);
+ * LEDs_SetAllLEDs(LEDS_LED4);
+ * Delay_MS(500);
+ *
+ * // Turn on all LEDs
+ * LEDs_SetAllLEDs(LEDS_ALL_LEDS);
+ * Delay_MS(1000);
+ *
+ * // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state
+ * LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1);
+ * \endcode
+ *
+ * @{
+ */
+
+#ifndef __LEDS_H__
+#define __LEDS_H__
+
+ /* Macros: */
+ #define __INCLUDE_FROM_LEDS_H
+
+ /* Includes: */
+ #include "../../Common/Common.h"
+
+ #if (BOARD == BOARD_NONE)
+ static inline void LEDs_Init(void) {};
+ static inline void LEDs_Disable(void) {};
+ static inline void LEDs_TurnOnLEDs(const uint_reg_t LEDMask) {};
+ static inline void LEDs_TurnOffLEDs(const uint_reg_t LEDMask) {};
+ static inline void LEDs_SetAllLEDs(const uint_reg_t LEDMask) {};
+ static inline void LEDs_ChangeLEDs(const uint_reg_t LEDMask, const uint_reg_t ActiveMask) {};
+ static inline void LEDs_ToggleLEDs(const uint_reg_t LEDMask) {};
+ static inline uint_reg_t LEDs_GetLEDs(void) { return 0; }
+ #elif (BOARD == BOARD_USBKEY)
+ #include "AVR8/USBKEY/LEDs.h"
+ #elif (BOARD == BOARD_STK525)
+ #include "AVR8/STK525/LEDs.h"
+ #elif (BOARD == BOARD_STK526)
+ #include "AVR8/STK526/LEDs.h"
+ #elif (BOARD == BOARD_RZUSBSTICK)
+ #include "AVR8/RZUSBSTICK/LEDs.h"
+ #elif (BOARD == BOARD_ATAVRUSBRF01)
+ #include "AVR8/ATAVRUSBRF01/LEDs.h"
+ #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
+ #include "AVR8/XPLAIN/LEDs.h"
+ #elif (BOARD == BOARD_BUMBLEB)
+ #include "AVR8/BUMBLEB/LEDs.h"
+ #elif (BOARD == BOARD_EVK527)
+ #include "AVR8/EVK527/LEDs.h"
+ #elif ((BOARD == BOARD_TEENSY) || (BOARD == BOARD_TEENSY2))
+ #include "AVR8/TEENSY/LEDs.h"
+ #elif (BOARD == BOARD_USBTINYMKII)
+ #include "AVR8/USBTINYMKII/LEDs.h"
+ #elif (BOARD == BOARD_BENITO)
+ #include "AVR8/BENITO/LEDs.h"
+ #elif (BOARD == BOARD_JMDBU2)
+ #include "AVR8/JMDBU2/LEDs.h"
+ #elif (BOARD == BOARD_OLIMEX162)
+ #include "AVR8/OLIMEX162/LEDs.h"
+ #elif (BOARD == BOARD_USBFOO)
+ #include "AVR8/USBFOO/LEDs.h"
+ #elif (BOARD == BOARD_UDIP)
+ #include "AVR8/UDIP/LEDs.h"
+ #elif (BOARD == BOARD_BUI)
+ #include "AVR8/BUI/LEDs.h"
+ #elif (BOARD == BOARD_UNO)
+ #include "AVR8/UNO/LEDs.h"
+ #elif (BOARD == BOARD_CULV3)
+ #include "AVR8/CULV3/LEDs.h"
+ #elif (BOARD == BOARD_BLACKCAT)
+ #include "AVR8/BLACKCAT/LEDs.h"
+ #elif (BOARD == BOARD_MAXIMUS)
+ #include "AVR8/MAXIMUS/LEDs.h"
+ #elif (BOARD == BOARD_MINIMUS)
+ #include "AVR8/MINIMUS/LEDs.h"
+ #elif (BOARD == BOARD_ADAFRUITU4)
+ #include "AVR8/ADAFRUITU4/LEDs.h"
+ #elif (BOARD == BOARD_MICROSIN162)
+ #include "AVR8/MICROSIN162/LEDs.h"
+ #elif (BOARD == BOARD_SPARKFUN8U2)
+ #include "AVR8/SPARKFUN8U2/LEDs.h"
+ #elif (BOARD == BOARD_EVK1101)
+ #include "UC3/EVK1101/LEDs.h"
+ #elif (BOARD == BOARD_TUL)
+ #include "AVR8/TUL/LEDs.h"
+ #elif (BOARD == BOARD_EVK1100)
+ #include "UC3/EVK1100/LEDs.h"
+ #elif (BOARD == BOARD_EVK1104)
+ #include "UC3/EVK1104/LEDs.h"
+ #elif (BOARD == BOARD_A3BU_XPLAINED)
+ #include "XMEGA/A3BU_XPLAINED/LEDs.h"
+ #elif ((BOARD == BOARD_USB2AX) || (BOARD == BOARD_USB2AX_V3))
+ #include "AVR8/USB2AX/LEDs.h"
+ #elif ((BOARD == BOARD_MICROPENDOUS_REV1) || (BOARD == BOARD_MICROPENDOUS_REV2) || \
+ (BOARD == BOARD_MICROPENDOUS_32U2))
+ #include "AVR8/MICROPENDOUS/LEDs.h"
+ #elif (BOARD == BOARD_B1_XPLAINED)
+ #include "XMEGA/B1_XPLAINED/LEDs.h"
+ #elif (BOARD == BOARD_MULTIO)
+ #include "AVR8/MULTIO/LEDs.h"
+ #elif (BOARD == BOARD_BIGMULTIO)
+ #include "AVR8/BIGMULTIO/LEDs.h"
+ #elif (BOARD == BOARD_DUCE)
+ #include "AVR8/DUCE/LEDs.h"
+ #elif (BOARD == BOARD_OLIMEX32U4)
+ #include "AVR8/OLIMEX32U4/LEDs.h"
+ #elif (BOARD == BOARD_OLIMEXT32U4)
+ #include "AVR8/OLIMEXT32U4/LEDs.h"
+ #else
+ #include "Board/LEDs.h"
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__DOXYGEN__)
+ #if !defined(LEDS_LED1)
+ #define LEDS_LED1 0
+ #endif
+
+ #if !defined(LEDS_LED2)
+ #define LEDS_LED2 0
+ #endif
+
+ #if !defined(LEDS_LED3)
+ #define LEDS_LED3 0
+ #endif
+
+ #if !defined(LEDS_LED4)
+ #define LEDS_LED4 0
+ #endif
+ #endif
+
+ /* Pseudo-Functions for Doxygen: */
+ #if defined(__DOXYGEN__)
+ /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
+ * I/O pins as outputs, and sets the LEDs to default to off.
+ */
+ static inline void LEDs_Init(void);
+
+ /** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */
+ static inline void LEDs_Disable(void);
+
+ /** Turns on the LEDs specified in the given LED mask.
+ *
+ * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
+ */
+ static inline void LEDs_TurnOnLEDs(const uint_reg_t LEDMask);
+
+ /** Turns off the LEDs specified in the given LED mask.
+ *
+ * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
+ */
+ static inline void LEDs_TurnOffLEDs(const uint_reg_t LEDMask);
+
+ /** Turns off all LEDs not specified in the given LED mask, and turns on all the LEDs in the given LED
+ * mask.
+ *
+ * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
+ */
+ static inline void LEDs_SetAllLEDs(const uint_reg_t LEDMask);
+
+ /** Turns off all LEDs in the LED mask that are not set in the active mask, and turns on all the LEDs
+ * specified in both the LED and active masks.
+ *
+ * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
+ * \param[in] ActiveMask Mask of whether the LEDs in the LED mask should be turned on or off.
+ */
+ static inline void LEDs_ChangeLEDs(const uint_reg_t LEDMask,
+ const uint_reg_t ActiveMask);
+
+ /** Toggles all LEDs in the LED mask, leaving all others in their current states.
+ *
+ * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
+ */
+ static inline void LEDs_ToggleLEDs(const uint_reg_t LEDMask);
+
+ /** Returns the status of all the board LEDs; set LED masks in the return value indicate that the
+ * corresponding LED is on.
+ *
+ * \return Mask of the board LEDs which are currently turned on.
+ */
+ static inline uint_reg_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
+ #endif
+
+#endif
+
+/** @} */
+
projects / pub / USBasp.git / blobdiff