Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface...

[pub/USBasp.git] / LUFA / Drivers / USB / LowLevel / Host.h

diff --git a/LUFA/Drivers/USB/LowLevel/Host.h b/LUFA/Drivers/USB/LowLevel/Host.h
index 1e28b90..2da2e4c 100644 (file)
--- a/LUFA/Drivers/USB/LowLevel/Host.h
+++ b/LUFA/Drivers/USB/LowLevel/Host.h
@@ -184,24 +184,24 @@
                                                                               *   completed the device enumeration process. This state causes the
                                                                               *   stack to change the current USB device address to that set for
                                                                               *   the connected device, before progressing to the user-implemented
-                                                                              *   HOST_STATE_Addressed state for further communications.
+                                                                              *   \ref HOST_STATE_Addressed state for further communications.
                                                                               *   
                                                                               *   \note Do not manually change to this state in the user code.
                                                                               */
                                HOST_STATE_Addressed                    = 11, /**< May be implemented by the user project. This state should
                                                                               *   set the device configuration before progressing to the
-                                                                              *   HOST_STATE_Configured state. Other processing (such as the
+                                                                              *   \ref HOST_STATE_Configured state. Other processing (such as the
                                                                               *   retrieval and processing of the device descriptor) should also
                                                                               *   be placed in this state.
                                                                               */
                                HOST_STATE_Configured                   = 12, /**< May be implemented by the user project. This state should implement the
                                                                               *   actual work performed on the attached device and changed to the
-                                                                              *   HOST_STATE_Suspended or HOST_STATE_WaitForDeviceRemoval states as needed.
+                                                                              *   \ref HOST_STATE_Suspended or \ref HOST_STATE_WaitForDeviceRemoval states as needed.
                                                                               */
                                HOST_STATE_Suspended                    = 15, /**< May be implemented by the user project. This state should be maintained
-                                                                              *   while the bus is suspended, and changed to either the HOST_STATE_Configured
+                                                                              *   while the bus is suspended, and changed to either the \ref HOST_STATE_Configured
                                                                               *   (after resuming the bus with the USB_Host_ResumeBus() macro) or the
-                                                                              *   HOST_STATE_WaitForDeviceRemoval states as needed.
+                                                                              *   \ref HOST_STATE_WaitForDeviceRemoval states as needed.
                                                                               */
                        };