Add FatFS library to the Webserver project, extend the HTTP server so that it now...

[pub/USBasp.git] / Demos / Device / LowLevel / RNDISEthernet / RNDISEthernet.c

diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
index d77d25b..1b617dd 100644 (file)
--- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
+++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
@@ -1,21 +1,21 @@
 /*\r
              LUFA Library\r
 /*\r
              LUFA Library\r

-     Copyright (C) Dean Camera, 2009.\r
+     Copyright (C) Dean Camera, 2010.\r

               \r
   dean [at] fourwalledcubicle [dot] com\r
       www.fourwalledcubicle.com\r
 */\r
 \r
 /*\r
               \r
   dean [at] fourwalledcubicle [dot] com\r
       www.fourwalledcubicle.com\r
 */\r
 \r
 /*\r

-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
-  Permission to use, copy, modify, and distribute this software\r
-  and its documentation for any purpose and without fee is hereby\r
-  granted, provided that the above copyright notice appear in all\r
-  copies and that both that the copyright notice and this\r
-  permission notice and warranty disclaimer appear in supporting\r
-  documentation, and that the name of the author not be used in\r
-  advertising or publicity pertaining to distribution of the\r
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+  Permission to use, copy, modify, distribute, and sell this \r
+  software and its documentation for any purpose is hereby granted\r
+  without fee, provided that the above copyright notice appear in \r
+  all copies and that both that the copyright notice and this\r
+  permission notice and warranty disclaimer appear in supporting \r
+  documentation, and that the name of the author not be used in \r
+  advertising or publicity pertaining to distribution of the \r

   software without specific, written prior permission.\r
 \r
   The author disclaim all warranties with regard to this\r
   software without specific, written prior permission.\r
 \r
   The author disclaim all warranties with regard to this\r


@@ -37,7 +37,7 @@
 #include "RNDISEthernet.h"\r
 \r
 /** Main program entry point. This routine configures the hardware required by the application, then\r
 #include "RNDISEthernet.h"\r
 \r
 /** Main program entry point. This routine configures the hardware required by the application, then\r

- *  starts the scheduler to run the USB management task.\r
+ *  enters a loop to run the application tasks in sequence.\r

  */\r
 int main(void)\r
 {\r
  */\r
 int main(void)\r
 {\r


@@ -79,7 +79,7 @@ void SetupHardware(void)
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r

-void EVENT_USB_Connect(void)\r
+void EVENT_USB_Device_Connect(void)\r

 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r


@@ -88,7 +88,7 @@ void EVENT_USB_Connect(void)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops all the relevant tasks.\r
  */\r
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops all the relevant tasks.\r
  */\r

-void EVENT_USB_Disconnect(void)\r
+void EVENT_USB_Device_Disconnect(void)\r

 {\r
        /* Indicate USB not ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
 {\r
        /* Indicate USB not ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r


@@ -97,7 +97,7 @@ void EVENT_USB_Disconnect(void)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration\r
  *  of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.\r
  */\r
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration\r
  *  of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.\r
  */\r

-void EVENT_USB_ConfigurationChanged(void)\r
+void EVENT_USB_Device_ConfigurationChanged(void)\r

 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r


@@ -125,11 +125,11 @@ void EVENT_USB_ConfigurationChanged(void)
        }\r
 }\r
 \r
        }\r
 }\r
 \r

-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific\r

  *  control requests that are not handled internally by the USB library (including the RNDIS control commands,\r
  *  which set up the USB RNDIS network adapter), so that they can be handled appropriately for the application.\r
  */\r
  *  control requests that are not handled internally by the USB library (including the RNDIS control commands,\r
  *  which set up the USB RNDIS network adapter), so that they can be handled appropriately for the application.\r
  */\r

-void EVENT_USB_UnhandledControlPacket(void)\r
+void EVENT_USB_Device_UnhandledControlRequest(void)\r

 {\r
        /* Process RNDIS class commands */\r
        switch (USB_ControlRequest.bRequest)\r
 {\r
        /* Process RNDIS class commands */\r
        switch (USB_ControlRequest.bRequest)\r


@@ -284,6 +284,10 @@ void Ethernet_Task(void)
           outgoing frames should be loaded into the FrameOUT structure. Both structures can only hold a single\r
           Ethernet frame at a time, so the FrameInBuffer bool is used to indicate when the buffers contain data. */\r
 \r
           outgoing frames should be loaded into the FrameOUT structure. Both structures can only hold a single\r
           Ethernet frame at a time, so the FrameInBuffer bool is used to indicate when the buffers contain data. */\r
 \r

+       /* Device must be connected and configured for the task to run */\r
+       if (USB_DeviceState != DEVICE_STATE_Configured)\r
+         return;\r
+\r

        /* Check if a frame has been written to the IN frame buffer */\r
        if (FrameIN.FrameInBuffer)\r
        {\r
        /* Check if a frame has been written to the IN frame buffer */\r
        if (FrameIN.FrameInBuffer)\r
        {\r