Fix up some missing target dependencies and output messages in the LUFA build system...

[pub/USBasp.git] / Projects / XPLAINBridge / XPLAINBridge.c

diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index 071c13e..7909cc4 100644 (file)
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -176,11 +176,6 @@ void SetupHardware(void)
        /* Disable clock division */
        clock_prescale_set(clock_div_1);
 
-       /* Hardware Initialization */
-       SoftUART_Init();
-       LEDs_Init();
-       USB_Init();
-
        /* Disable JTAG debugging */
        MCUCR |= (1 << JTD);
        MCUCR |= (1 << JTD);
@@ -195,6 +190,16 @@ void SetupHardware(void)
        /* Re-enable JTAG debugging */
        MCUCR &= ~(1 << JTD);
        MCUCR &= ~(1 << JTD);
+
+       /* Hardware Initialization */
+       SoftUART_Init();
+       LEDs_Init();
+       #if defined(RESET_TOGGLES_LIBUSB_COMPAT)
+       UpdateCurrentCompatibilityMode();
+       #endif
+       
+       /* USB Stack Initialization */  
+       USB_Init();
 }
 
 /** Event handler for the library USB Configuration Changed event. */
@@ -221,9 +226,8 @@ void EVENT_USB_Device_ConfigurationChanged(void)
        {
                ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
 
-               #if defined(LIBUSB_DRIVER_COMPAT)
-               ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
-               #endif
+               if ((AVRISP_DATA_IN_EPADDR & ENDPOINT_EPNUM_MASK) != (AVRISP_DATA_OUT_EPADDR & ENDPOINT_EPNUM_MASK))
+                 ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1);
 
                /* Configure the V2 protocol packet handler */
                V2Protocol_Init();
@@ -267,20 +271,22 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
  *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
  *  USB host.
  *
- *  \param[in]  wValue  Descriptor type and index to retrieve
- *  \param[in]  wIndex  Sub-index to retrieve (such as a localized string language)
- *  \param[out] DescriptorAddress  Address of the retrieved descriptor
+ *  \param[in]  wValue                 Descriptor type and index to retrieve
+ *  \param[in]  wIndex                 Sub-index to retrieve (such as a localized string language)
+ *  \param[out] DescriptorAddress      Address of the retrieved descriptor
+ *  \param[out] DescriptorMemorySpace  Memory space that the descriptor is stored in
  *
  *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found
  */
 uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
                                     const uint8_t wIndex,
-                                    const void** const DescriptorAddress)
+                                    const void** const DescriptorAddress,
+                                           uint8_t* const DescriptorMemorySpace)
 {
        /* Return the correct descriptors based on the selected mode */
        if (CurrentFirmwareMode == MODE_USART_BRIDGE)
-         return USART_GetDescriptor(wValue, wIndex, DescriptorAddress);
+         return USART_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
        else
-         return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress);
+         return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress, DescriptorMemorySpace);
 }