Renamed all library events to properly seperate out Device and Host mode events....

[pub/USBasp.git] / Demos / Device / LowLevel / USBtoSerial / USBtoSerial.c

diff --git a/Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c b/Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c
index 2765064..bb1b4da 100644 (file)
--- a/Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c
+++ b/Demos/Device/LowLevel/USBtoSerial/USBtoSerial.c
@@ -89,7 +89,7 @@ void SetupHardware(void)
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r

-void EVENT_USB_Connect(void)\r
+void EVENT_USB_Device_Connect(void)\r

 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r


@@ -98,7 +98,7 @@ void EVENT_USB_Connect(void)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops the USB management and CDC management tasks.\r
  */\r
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops the USB management and CDC management tasks.\r
  */\r

-void EVENT_USB_Disconnect(void)\r
+void EVENT_USB_Device_Disconnect(void)\r

 {      \r
        /* Reset Tx and Rx buffers, device disconnected */\r
        Buffer_Initialize(&Rx_Buffer);\r
 {      \r
        /* Reset Tx and Rx buffers, device disconnected */\r
        Buffer_Initialize(&Rx_Buffer);\r


@@ -111,7 +111,7 @@ void EVENT_USB_Disconnect(void)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration\r
  *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.\r
  */\r
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration\r
  *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.\r
  */\r

-void EVENT_USB_ConfigurationChanged(void)\r
+void EVENT_USB_Device_ConfigurationChanged(void)\r

 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r


@@ -137,13 +137,16 @@ void EVENT_USB_ConfigurationChanged(void)
        {\r
                LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
        }\r
        {\r
                LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
        }\r

+\r
+       /* Reset line encoding baud rate so that the host knows to send new values */\r
+       LineEncoding.BaudRateBPS = 0;\r

 }\r
 \r
 }\r
 \r

-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific\r

  *  control requests that are not handled internally by the USB library (including the CDC control commands,\r
  *  which are all issued via the control endpoint), so that they can be handled appropriately for the application.\r
  */\r
  *  control requests that are not handled internally by the USB library (including the CDC control commands,\r
  *  which are all issued via the control endpoint), so that they can be handled appropriately for the application.\r
  */\r

-void EVENT_USB_UnhandledControlPacket(void)\r
+void EVENT_USB_Device_UnhandledControlRequest(void)\r

 {\r
        /* Process CDC specific control requests */\r
        switch (USB_ControlRequest.bRequest)\r
 {\r
        /* Process CDC specific control requests */\r
        switch (USB_ControlRequest.bRequest)\r