Renamed all library events to properly seperate out Device and Host mode events....

[pub/USBasp.git] / Demos / Device / LowLevel / RNDISEthernet / RNDISEthernet.c

diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
index ca38c24..b722187 100644 (file)
--- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
+++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
@@ -79,7 +79,7 @@ void SetupHardware(void)
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r

-void EVENT_USB_Connect(void)\r
+void EVENT_USB_Device_Connect(void)\r

 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r


@@ -88,7 +88,7 @@ void EVENT_USB_Connect(void)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops all the relevant tasks.\r
  */\r
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops all the relevant tasks.\r
  */\r

-void EVENT_USB_Disconnect(void)\r
+void EVENT_USB_Device_Disconnect(void)\r

 {\r
        /* Indicate USB not ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
 {\r
        /* Indicate USB not ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r


@@ -97,7 +97,7 @@ void EVENT_USB_Disconnect(void)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration\r
  *  of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.\r
  */\r
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration\r
  *  of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.\r
  */\r

-void EVENT_USB_ConfigurationChanged(void)\r
+void EVENT_USB_Device_ConfigurationChanged(void)\r

 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r


@@ -125,11 +125,11 @@ void EVENT_USB_ConfigurationChanged(void)
        }\r
 }\r
 \r
        }\r
 }\r
 \r

-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific\r

  *  control requests that are not handled internally by the USB library (including the RNDIS control commands,\r
  *  which set up the USB RNDIS network adapter), so that they can be handled appropriately for the application.\r
  */\r
  *  control requests that are not handled internally by the USB library (including the RNDIS control commands,\r
  *  which set up the USB RNDIS network adapter), so that they can be handled appropriately for the application.\r
  */\r

-void EVENT_USB_UnhandledControlPacket(void)\r
+void EVENT_USB_Device_UnhandledControlRequest(void)\r

 {\r
        /* Process RNDIS class commands */\r
        switch (USB_ControlRequest.bRequest)\r
 {\r
        /* Process RNDIS class commands */\r
        switch (USB_ControlRequest.bRequest)\r