Minor updates to the Benito programmer - remove redundant PORT register manipulations.

[pub/USBasp.git] / Demos / Device / LowLevel / Keyboard / Keyboard.c

diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.c b/Demos/Device/LowLevel/Keyboard/Keyboard.c
index 06806b5..e27b228 100644 (file)
--- a/Demos/Device/LowLevel/Keyboard/Keyboard.c
+++ b/Demos/Device/LowLevel/Keyboard/Keyboard.c
@@ -118,19 +118,25 @@ void EVENT_USB_Disconnect(void)
  *  of the USB device after enumeration, and configures the keyboard device endpoints.\r
  */\r
 void EVENT_USB_ConfigurationChanged(void)\r
  *  of the USB device after enumeration, and configures the keyboard device endpoints.\r
  */\r
 void EVENT_USB_ConfigurationChanged(void)\r

-{\r
-       /* Setup Keyboard Keycode Report Endpoint */\r
-       Endpoint_ConfigureEndpoint(KEYBOARD_EPNUM, EP_TYPE_INTERRUPT,\r
-                                      ENDPOINT_DIR_IN, KEYBOARD_EPSIZE,\r
-                                  ENDPOINT_BANK_SINGLE);\r
-\r
-       /* Setup Keyboard LED Report Endpoint */\r
-       Endpoint_ConfigureEndpoint(KEYBOARD_LEDS_EPNUM, EP_TYPE_INTERRUPT,\r
-                                      ENDPOINT_DIR_OUT, KEYBOARD_EPSIZE,\r
-                                  ENDPOINT_BANK_SINGLE);\r
-\r
+{      \r

        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r

+\r
+       /* Setup Keyboard Keycode Report Endpoint */\r
+       if (!(Endpoint_ConfigureEndpoint(KEYBOARD_EPNUM, EP_TYPE_INTERRUPT,\r
+                                            ENDPOINT_DIR_IN, KEYBOARD_EPSIZE,\r
+                                        ENDPOINT_BANK_SINGLE)))\r
+       {\r
+               LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+       }\r
+       \r
+       /* Setup Keyboard LED Report Endpoint */\r
+       if (!(Endpoint_ConfigureEndpoint(KEYBOARD_LEDS_EPNUM, EP_TYPE_INTERRUPT,\r
+                                            ENDPOINT_DIR_OUT, KEYBOARD_EPSIZE,\r
+                                        ENDPOINT_BANK_SINGLE)))\r
+       {\r
+               LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+       }\r

 }\r
 \r
 /** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r
 }\r
 \r
 /** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r


@@ -166,7 +172,11 @@ void EVENT_USB_UnhandledControlPacket(void)
                                Endpoint_ClearSETUP();\r
                                \r
                                /* Wait until the LED report has been sent by the host */\r
                                Endpoint_ClearSETUP();\r
                                \r
                                /* Wait until the LED report has been sent by the host */\r

-                               while (!(Endpoint_IsOUTReceived()));\r
+                               while (!(Endpoint_IsOUTReceived()))\r
+                               {\r
+                                       if (USB_DeviceState == DEVICE_STATE_Unattached)\r
+                                         return;\r
+                               }\r

 \r
                                /* Read in the LED report from the host */\r
                                uint8_t LEDStatus = Endpoint_Read_Byte();\r
 \r
                                /* Read in the LED report from the host */\r
                                uint8_t LEDStatus = Endpoint_Read_Byte();\r


@@ -177,9 +187,7 @@ void EVENT_USB_UnhandledControlPacket(void)
                                /* Clear the endpoint data */\r
                                Endpoint_ClearOUT();\r
 \r
                                /* Clear the endpoint data */\r
                                Endpoint_ClearOUT();\r
 \r

-                               /* Acknowledge status stage */\r
-                               while (!(Endpoint_IsINReady()));\r
-                               Endpoint_ClearIN();\r
+                               Endpoint_ClearStatusStage();\r

                        }\r
                        \r
                        break;\r
                        }\r
                        \r
                        break;\r


@@ -194,9 +202,7 @@ void EVENT_USB_UnhandledControlPacket(void)
                                /* Send the flag to the host */\r
                                Endpoint_ClearIN();\r
 \r
                                /* Send the flag to the host */\r
                                Endpoint_ClearIN();\r
 \r

-                               /* Acknowledge status stage */\r
-                               while (!(Endpoint_IsOUTReceived()));\r
-                               Endpoint_ClearOUT();\r
+                               Endpoint_ClearStatusStage();\r

                        }\r
                        \r
                        break;\r
                        }\r
                        \r
                        break;\r


@@ -208,9 +214,7 @@ void EVENT_USB_UnhandledControlPacket(void)
                                /* Set or clear the flag depending on what the host indicates that the current Protocol should be */\r
                                UsingReportProtocol = (USB_ControlRequest.wValue != 0);\r
 \r
                                /* Set or clear the flag depending on what the host indicates that the current Protocol should be */\r
                                UsingReportProtocol = (USB_ControlRequest.wValue != 0);\r
 \r

-                               /* Acknowledge status stage */\r
-                               while (!(Endpoint_IsINReady()));\r
-                               Endpoint_ClearIN();\r
+                               Endpoint_ClearStatusStage();\r

                        }\r
                        \r
                        break;\r
                        }\r
                        \r
                        break;\r


@@ -219,12 +223,10 @@ void EVENT_USB_UnhandledControlPacket(void)
                        {\r
                                Endpoint_ClearSETUP();\r
                                \r
                        {\r
                                Endpoint_ClearSETUP();\r
                                \r

-                               /* Get idle period in MSB */\r
-                               IdleCount = (USB_ControlRequest.wValue >> 8);\r
+                               /* Get idle period in MSB, IdleCount must be multiplied by 4 to get number of milliseconds */\r
+                               IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6);\r

                                \r
                                \r

-                               /* Acknowledge status stage */\r
-                               while (!(Endpoint_IsINReady()));\r
-                               Endpoint_ClearIN();\r
+                               Endpoint_ClearStatusStage();\r

                        }\r
                        \r
                        break;\r
                        }\r
                        \r
                        break;\r


@@ -233,15 +235,13 @@ void EVENT_USB_UnhandledControlPacket(void)
                        {               \r
                                Endpoint_ClearSETUP();\r
                                \r
                        {               \r
                                Endpoint_ClearSETUP();\r
                                \r

-                               /* Write the current idle duration to the host */\r
-                               Endpoint_Write_Byte(IdleCount);\r
+                               /* Write the current idle duration to the host, must be divided by 4 before sent to host */\r
+                               Endpoint_Write_Byte(IdleCount >> 2);\r

                                \r
                                /* Send the flag to the host */\r
                                Endpoint_ClearIN();\r
 \r
                                \r
                                /* Send the flag to the host */\r
                                Endpoint_ClearIN();\r
 \r

-                               /* Acknowledge status stage */\r
-                               while (!(Endpoint_IsOUTReceived()));\r
-                               Endpoint_ClearOUT();\r
+                               Endpoint_ClearStatusStage();\r

                        }\r
 \r
                        break;\r
                        }\r
 \r
                        break;\r


@@ -260,7 +260,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK)
 \r
 /** Fills the given HID report data structure with the next HID report to send to the host.\r
  *\r
 \r
 /** Fills the given HID report data structure with the next HID report to send to the host.\r
  *\r

- *  \param ReportData  Pointer to a HID report data structure to be filled\r
+ *  \param[out] ReportData  Pointer to a HID report data structure to be filled\r

  */\r
 void CreateKeyboardReport(USB_KeyboardReport_Data_t* ReportData)\r
 {\r
  */\r
 void CreateKeyboardReport(USB_KeyboardReport_Data_t* ReportData)\r
 {\r


@@ -285,7 +285,7 @@ void CreateKeyboardReport(USB_KeyboardReport_Data_t* ReportData)
 \r
 /** Processes a received LED report, and updates the board LEDs states to match.\r
  *\r
 \r
 /** Processes a received LED report, and updates the board LEDs states to match.\r
  *\r

- *  \param LEDReport  LED status report from the host\r
+ *  \param[in] LEDReport  LED status report from the host\r

  */\r
 void ProcessLEDReport(uint8_t LEDReport)\r
 {\r
  */\r
 void ProcessLEDReport(uint8_t LEDReport)\r
 {\r


@@ -323,8 +323,8 @@ void SendNextReport(void)
        /* Check if the idle period is set and has elapsed */\r
        if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining)))\r
        {\r
        /* Check if the idle period is set and has elapsed */\r
        if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining)))\r
        {\r

-               /* Reset the idle time remaining counter, must multiply by 4 to get the duration in milliseconds */\r
-               IdleMSRemaining = (IdleCount << 2);\r
+               /* Reset the idle time remaining counter */\r
+               IdleMSRemaining = IdleCount;\r

                \r
                /* Idle period is set and has elapsed, must send a report to the host */\r
                SendReport = true;\r
                \r
                /* Idle period is set and has elapsed, must send a report to the host */\r
                SendReport = true;\r


@@ -371,13 +371,13 @@ void ReceiveNextReport(void)
 /** Function to manage HID report generation and transmission to the host, when in report mode. */\r
 void HID_Task(void)\r
 {\r
 /** Function to manage HID report generation and transmission to the host, when in report mode. */\r
 void HID_Task(void)\r
 {\r

-       /* Check if the USB system is connected to a host */\r
-       if (USB_IsConnected)\r
-       {\r
-               /* Send the next keypress report to the host */\r
-               SendNextReport();\r
+       /* Device must be connected and configured for the task to run */\r
+       if (USB_DeviceState != DEVICE_STATE_Configured)\r
+         return;\r
+         \r
+       /* Send the next keypress report to the host */\r
+       SendNextReport();\r

                \r
                \r

-               /* Process the LED report sent from the host */\r
-               ReceiveNextReport();\r
-       }\r
+       /* Process the LED report sent from the host */\r
+       ReceiveNextReport();\r

 }\r
 }\r