Clean up BUILD build system module - seperate architecture utility prefix code and...

[pub/USBasp.git] / LUFA / Drivers / Peripheral / AVR8 / ADC_AVR8.h

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index 932da64..c04d2ba 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -7,7 +7,7 @@
 */
 
 /*
 */
 
 /*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -55,14 +55,14 @@
  *  \code
  *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
  *  \code
  *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);

- *
+ *      

  *      // Must setup the ADC channel to read beforehand
  *      ADC_SetupChannel(1);
  *      // Must setup the ADC channel to read beforehand
  *      ADC_SetupChannel(1);

- *
+ *      

  *      // Perform a single conversion of the ADC channel 1
  *      ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      printf("Conversion Result: %d\r\n", ADC_GetResult());
  *      // Perform a single conversion of the ADC channel 1
  *      ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      printf("Conversion Result: %d\r\n", ADC_GetResult());

- *
+ *      

  *      // Start reading ADC channel 1 in free running (continuous conversion) mode
  *      ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      for (;;)
  *      // Start reading ADC channel 1 in free running (continuous conversion) mode
  *      ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
  *      for (;;)


@@ -253,8 +253,8 @@
 
                        /** Retrieves the ADC MUX mask for the given ADC channel number.
                         *
 
                        /** Retrieves the ADC MUX mask for the given ADC channel number.
                         *

-                        *  \note This macro will only work correctly on channel numbers that are compile-time
-                        *        constants defined by the preprocessor.
+                        *  \attention This macro will only work correctly on channel numbers that are compile-time
+                        *             constants defined by the preprocessor.

                         *
                         *  \param[in] Channel  Index of the ADC channel whose MUX mask is to be retrieved.
                         */
                         *
                         *  \param[in] Channel  Index of the ADC channel whose MUX mask is to be retrieved.
                         */


@@ -268,9 +268,8 @@
                         *
                         *  \note This must only be called for ADC channels with are connected to a physical port
                         *        pin of the AVR, denoted by its special alternative function ADCx.
                         *
                         *  \note This must only be called for ADC channels with are connected to a physical port
                         *        pin of the AVR, denoted by its special alternative function ADCx.

-                        *        \n\n

                         *
                         *

-                        *  \note The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
+                        *  \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.

                         *
                         *  \param[in] ChannelIndex  ADC channel number to set up for conversions.
                         */
                         *
                         *  \param[in] ChannelIndex  ADC channel number to set up for conversions.
                         */


@@ -311,9 +310,8 @@
                         *
                         *  \note This must only be called for ADC channels with are connected to a physical port
                         *        pin of the AVR, denoted by its special alternative function ADCx.
                         *
                         *  \note This must only be called for ADC channels with are connected to a physical port
                         *        pin of the AVR, denoted by its special alternative function ADCx.

-                        *        \n\n

                         *
                         *

-                        *  \note The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
+                        *  \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.

                         *
                         *  \param[in] ChannelIndex  ADC channel number to set up for conversions.
                         */
                         *
                         *  \param[in] ChannelIndex  ADC channel number to set up for conversions.
                         */