Converted device mode low-level demos to schedulerless.

[pub/USBasp.git] / Demos / Device / LowLevel / GenericHID / GenericHID.c

diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.c b/Demos/Device/LowLevel/GenericHID/GenericHID.c
index 058d269..a604bbe 100644 (file)
--- a/Demos/Device/LowLevel/GenericHID/GenericHID.c
+++ b/Demos/Device/LowLevel/GenericHID/GenericHID.c
@@ -36,13 +36,6 @@
 \r
 #include "GenericHID.h"\r
 \r
-/* Scheduler Task List */\r
-TASK_LIST\r
-{\r
-       { .Task = USB_USBTask          , .TaskStatus = TASK_STOP },\r
-       { .Task = USB_HID_Report       , .TaskStatus = TASK_STOP },\r
-};\r
-\r
 /** Static buffer to hold the last received report from the host, so that it can be echoed back in the next sent report */\r
 static uint8_t LastReceived[GENERIC_REPORT_SIZE];\r
 \r
@@ -52,6 +45,20 @@ static uint8_t LastReceived[GENERIC_REPORT_SIZE];
  */\r
 int main(void)\r
 {\r
+       SetupHardware();\r
+       \r
+       LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
+\r
+       for (;;)\r
+       {\r
+               HID_Task();\r
+               USB_USBTask();\r
+       }\r
+}\r
+\r
+/** Configures the board hardware and chip peripherals for the demo's functionality. */\r
+void SetupHardware(void)\r
+{\r
        /* Disable watchdog if enabled by bootloader/fuses */\r
        MCUSR &= ~(1 << WDRF);\r
        wdt_disable();\r
@@ -61,18 +68,7 @@ int main(void)
 \r
        /* Hardware Initialization */\r
        LEDs_Init();\r
-\r
-       /* Indicate USB not ready */\r
-       UpdateStatus(Status_USBNotReady);\r
-\r
-       /* Initialize Scheduler so that it can be used */\r
-       Scheduler_Init();\r
-\r
-       /* Initialize USB Subsystem */\r
        USB_Init();\r
-       \r
-       /* Scheduling - routine never returns, so put this last in the main function */\r
-       Scheduler_Start();\r
 }\r
 \r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
@@ -80,11 +76,8 @@ int main(void)
  */\r
 void EVENT_USB_Connect(void)\r
 {\r
-       /* Start USB management task */\r
-       Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);\r
-\r
        /* Indicate USB enumerating */\r
-       UpdateStatus(Status_USBEnumerating);\r
+       LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
 }\r
 \r
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
@@ -92,12 +85,8 @@ void EVENT_USB_Connect(void)
  */\r
 void EVENT_USB_Disconnect(void)\r
 {\r
-       /* Stop running HID reporting and USB management tasks */\r
-       Scheduler_SetTaskMode(USB_HID_Report, TASK_STOP);\r
-       Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);\r
-\r
        /* Indicate USB not ready */\r
-       UpdateStatus(Status_USBNotReady);\r
+       LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
 }\r
 \r
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration\r
@@ -116,7 +105,7 @@ void EVENT_USB_ConfigurationChanged(void)
                                   ENDPOINT_BANK_SINGLE);\r
 \r
        /* Indicate USB connected and ready */\r
-       UpdateStatus(Status_USBReady);\r
+       LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
 }\r
 \r
 /** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r
@@ -173,33 +162,6 @@ void EVENT_USB_UnhandledControlPacket(void)
        }\r
 }\r
 \r
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to\r
- *  log to a serial port, or anything else that is suitable for status updates.\r
- *\r
- *  \param CurrentStatus  Current status of the system, from the GenericHID_StatusCodes_t enum\r
- */\r
-void UpdateStatus(uint8_t CurrentStatus)\r
-{\r
-       uint8_t LEDMask = LEDS_NO_LEDS;\r
-       \r
-       /* Set the LED mask to the appropriate LED mask based on the given status code */\r
-       switch (CurrentStatus)\r
-       {\r
-               case Status_USBNotReady:\r
-                       LEDMask = (LEDS_LED1);\r
-                       break;\r
-               case Status_USBEnumerating:\r
-                       LEDMask = (LEDS_LED1 | LEDS_LED2);\r
-                       break;\r
-               case Status_USBReady:\r
-                       LEDMask = (LEDS_LED2 | LEDS_LED4);\r
-                       break;\r
-       }\r
-       \r
-       /* Set the board LEDs to the new LED mask */\r
-       LEDs_SetAllLEDs(LEDMask);\r
-}\r
-\r
 /** Function to process the lest received report from the host.\r
  *\r
  *  \param DataArray  Pointer to a buffer where the last report data is stored\r
@@ -232,7 +194,7 @@ void CreateGenericHIDReport(uint8_t* DataArray)
          DataArray[i] = LastReceived[i];\r
 }\r
 \r
-TASK(USB_HID_Report)\r
+void HID_Task(void)\r
 {\r
        /* Check if the USB system is connected to a host */\r
        if (USB_IsConnected)\r