/*\r
              LUFA Library\r
-     Copyright (C) Dean Camera, 2009.\r
+     Copyright (C) Dean Camera, 2010.\r
               \r
   dean [at] fourwalledcubicle [dot] com\r
       www.fourwalledcubicle.com\r
 */\r
 \r
 /*\r
-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
-  Permission to use, copy, modify, and distribute this software\r
-  and its documentation for any purpose and without fee is hereby\r
-  granted, provided that the above copyright notice appear in all\r
-  copies and that both that the copyright notice and this\r
-  permission notice and warranty disclaimer appear in supporting\r
-  documentation, and that the name of the author not be used in\r
-  advertising or publicity pertaining to distribution of the\r
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+  Permission to use, copy, modify, distribute, and sell this \r
+  software and its documentation for any purpose is hereby granted\r
+  without fee, provided that the above copyright notice appear in \r
+  all copies and that both that the copyright notice and this\r
+  permission notice and warranty disclaimer appear in supporting \r
+  documentation, and that the name of the author not be used in \r
+  advertising or publicity pertaining to distribution of the \r
   software without specific, written prior permission.\r
 \r
   The author disclaim all warranties with regard to this\r
        \r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
 \r
-       /* Startup message */\r
-       puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY\r
-              "Bluetooth Host Demo running.\r\n" ESC_INVERSE_OFF));\r
+       puts_P(PSTR(ESC_FG_CYAN "Bluetooth Host Demo running.\r\n" ESC_FG_WHITE));\r
                   \r
        for (;;)\r
        {\r
                Bluetooth_Stack_Task();\r
                Bluetooth_Management_Task();\r
+               USB_USBTask();\r
        }\r
 }\r
 \r
        USB_Init();\r
 }\r
 \r
-void EVENT_USB_DeviceAttached(void)\r
+void EVENT_USB_Host_DeviceAttached(void)\r
 {\r
-       puts_P(PSTR("Device Attached.\r\n"));\r
+       puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));\r
 \r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
 }\r
 \r
-void EVENT_USB_DeviceUnattached(void)\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
 {\r
-       puts_P(PSTR("\r\nDevice Unattached.\r\n"));\r
+       puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));\r
 \r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
 }\r
 \r
-void EVENT_USB_DeviceEnumerationComplete(void)\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
 {\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
 }\r
 \r
-void EVENT_USB_HostError(uint8_t ErrorCode)\r
+void EVENT_USB_Host_HostError(uint8_t ErrorCode)\r
 {\r
        USB_ShutDown();\r
 \r
-       puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n"));\r
-       printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
+       printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"\r
+                                " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
 \r
        LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
        for(;;);\r
 }\r
 \r
-void EVENT_USB_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)\r
+void EVENT_USB_Host_DeviceEnumerationFailed(uint8_t ErrorCode, uint8_t SubErrorCode)\r
 {\r
-       puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n"));\r
-       printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
-       printf_P(PSTR(" -- In State %d\r\n"), USB_HostState);\r
+       printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"\r
+                                " -- Error Code %d\r\n"\r
+                                " -- Sub Error Code %d\r\n"\r
+                                " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);\r
        \r
        LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
 }\r
                        if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead)\r
                        {\r
                                if (ErrorCode == ControlErrorDuringDeviceRead)\r
-                                 puts_P(PSTR("Control Error (Get Device).\r\n"));\r
+                                 puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));\r
                                else\r
-                                 puts_P(PSTR("Invalid Device.\r\n"));\r
+                                 puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
 \r
-                               printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+                               printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
                                \r
                                /* Indicate error via status LEDs */\r
                                LEDs_SetAllLEDs(LEDS_LED1);\r
 \r
                                /* Wait until USB device disconnected */\r
-                               while (USB_IsConnected);\r
+                               USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
                                break;\r
                        }\r
 \r
                        puts_P(PSTR("Bluetooth Dongle Detected.\r\n"));\r
 \r
-                       /* Standard request to set the device configuration to configuration 1 */\r
-                       USB_ControlRequest = (USB_Request_Header_t)\r
-                               {\r
-                                       bmRequestType: (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),\r
-                                       bRequest:      REQ_SetConfiguration,\r
-                                       wValue:        1,\r
-                                       wIndex:        0,\r
-                                       wLength:       0,\r
-                               };\r
-                               \r
-                       /* Select the control pipe for the request transfer */\r
-                       Pipe_SelectPipe(PIPE_CONTROLPIPE);\r
-\r
-                       /* Send the request, display error and wait for device detatch if request fails */\r
-                       if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)\r
+                       /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */\r
+                       if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)\r
                        {\r
-                               puts_P(PSTR("Control Error (Set Configuration).\r\n"));\r
-                               printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+                               printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"\r
+                                                        " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
 \r
                                /* Indicate error via status LEDs */\r
                                LEDs_SetAllLEDs(LEDS_LED1);\r
 \r
                                /* Wait until USB device disconnected */\r
-                               while (USB_IsConnected);\r
+                               USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
                                break;\r
                        }\r
                                \r
-                       USB_HostState = HOST_STATE_Configured;\r
-                       break;\r
-               case HOST_STATE_Configured:\r
                        puts_P(PSTR("Getting Config Data.\r\n"));\r
                \r
                        /* Get and process the configuration descriptor data */\r
                        if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)\r
                        {\r
                                if (ErrorCode == ControlErrorDuringConfigRead)\r
-                                 puts_P(PSTR("Control Error (Get Configuration).\r\n"));\r
+                                 puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));\r
                                else\r
-                                 puts_P(PSTR("Invalid Device.\r\n"));\r
+                                 puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));\r
 \r
-                               printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode);\r
+                               printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);\r
                                \r
                                /* Indicate error via status LEDs */\r
                                LEDs_SetAllLEDs(LEDS_LED1);\r
 \r
                                /* Wait until USB device disconnected */\r
-                               while (USB_IsConnected);\r
+                               USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
                                break;\r
                        }\r
 \r
                        puts_P(PSTR("Bluetooth Dongle Enumerated.\r\n"));\r
 \r
-                       USB_HostState = HOST_STATE_Ready;\r
-                       break;\r
-               case HOST_STATE_Ready:\r
-                       /* Do nothing, Bluetooth stack will take care of enumeration */\r
-                       \r
+                       USB_HostState = HOST_STATE_Configured;\r
                        break;\r
        }\r
 }\r