Update UC3 platform driver support to use the bitmasks defined in the header files...

[pub/USBasp.git] / LUFA / Drivers / USB / Core / Events.h

diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h
index 4a3a1a1..8afd3b5 100644 (file)
--- a/LUFA/Drivers/USB/Core/Events.h
+++ b/LUFA/Drivers/USB/Core/Events.h
@@ -29,19 +29,8 @@
 */
 
 /** \file
- *  \brief USB controller events manager.
- *
- *  This file contains macros and functions relating to the management of library events, which are small
- *  pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from
- *  multiple places in the user or library code, which may or may not be inside an ISR, thus each handler
- *  should be written to be as small and fast as possible to prevent possible problems.
- *
- *  Events can be hooked by the user application by declaring a handler function with the same name and parameters
- *  listed here. If an event with no user-associated handler is fired within the library, it by default maps to an
- *  internal empty stub function.
- *
- *  Each event must only have one associated event handler, but can be raised by multiple sources by calling the
- *  event handler function (with any required event parameters).
+ *  \brief USB Event management definitions.
+ *  \copydetails Group_Events
  *
  *  \note This file should not be included directly. It is automatically included as needed by the USB driver
  *        dispatch header located in LUFA/Drivers/USB/USB.h.
@@ -49,6 +38,7 @@
 
 /** \ingroup Group_USB
  *  \defgroup Group_Events USB Events
+ *  \brief USB Event management definitions.
  *
  *  This module contains macros and functions relating to the management of library events, which are small
  *  pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from
@@ -88,7 +78,7 @@
                        /** Event for USB mode pin level change. This event fires when the USB interface is set to dual role
                         *  mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires
                         *  before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect
-                        *  event has fired (if connected before the role change).
+                        *  event has fired (if disconnected before the role change).
                         *
                         *  \note This event only exists on microcontrollers that support dual role USB modes.
                         *        \n\n
@@ -193,7 +183,7 @@
                         *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
                         *  two seconds) will prevent the device from enumerating correctly.
                         *
-                        *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
+                        *  \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
                         *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
@@ -259,7 +249,7 @@
                         *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
                         *  one second) will prevent the device from enumerating correctly.
                         *
-                        *  This event fires after the value of \ref USB_ConfigurationNumber has been changed.
+                        *  This event fires after the value of \ref USB_Device_ConfigurationNumber has been changed.
                         *
                         *  \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
                         *        \ref Group_USBManagement documentation).