Replace blind interface descriptor search in the incomplete AndroidAccessoryHost...

[pub/USBasp.git] / LUFA / Drivers / USB / Core / USBMode.h

diff --git a/LUFA/Drivers/USB/Core/USBMode.h b/LUFA/Drivers/USB/Core/USBMode.h
index 58f9927..fad9422 100644 (file)
--- a/LUFA/Drivers/USB/Core/USBMode.h
+++ b/LUFA/Drivers/USB/Core/USBMode.h
@@ -29,11 +29,8 @@
 */
 
 /** \file
 */
 
 /** \file

- *  \brief USB mode and capability macros.
- *
- *  This file defines macros indicating the type of USB controller the library is being compiled for, and its
- *  capabilities. These macros may then be referenced in the user application to selectively enable or disable
- *  code sections depending on if they are defined or not.
+ *  \brief USB mode and feature support definitions.
+ *  \copydetails Group_USBMode

  *
  *  \note This file should not be included directly. It is automatically included as needed by the USB driver
  *        dispatch header located in LUFA/Drivers/USB/USB.h.
  *
  *  \note This file should not be included directly. It is automatically included as needed by the USB driver
  *        dispatch header located in LUFA/Drivers/USB/USB.h.


@@ -41,11 +38,15 @@
 
 /** \ingroup Group_USB
  *  \defgroup Group_USBMode USB Mode Tokens
 
 /** \ingroup Group_USB
  *  \defgroup Group_USBMode USB Mode Tokens

+ *  \brief USB mode and feature support definitions.

  *
  *

- *  After the inclusion of the master USB driver header, one or more of the following
- *  tokens may be defined, to allow the user code to conditionally enable or disable
- *  code based on the USB controller family and allowable USB modes. These tokens may
- *  be tested against to eliminate code relating to a USB mode which is not enabled for
+ *  This file defines macros indicating the type of USB controller the library is being compiled for, and its
+ *  capabilities. These macros may then be referenced in the user application to selectively enable or disable
+ *  code sections depending on if they are defined or not.
+ *
+ *  After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to
+ *  allow the user code to conditionally enable or disable code based on the USB controller family and allowable
+ *  USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for

  *  the given compilation.
  *
  *  @{
  *  the given compilation.
  *
  *  @{


@@ -54,6 +55,11 @@
 #ifndef __USBMODE_H__
 #define __USBMODE_H__
 
 #ifndef __USBMODE_H__
 #define __USBMODE_H__
 

+       /* Enable C linkage for C++ Compilers: */
+               #if defined(__cplusplus)
+                       extern "C" {
+               #endif
+

        /* Preprocessor Checks: */
                #if !defined(__INCLUDE_FROM_USB_DRIVER)
                        #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
        /* Preprocessor Checks: */
                #if !defined(__INCLUDE_FROM_USB_DRIVER)
                        #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.


@@ -61,37 +67,62 @@
 
        /* Public Interface - May be used in end-application: */
        #if defined(__DOXYGEN__)
 
        /* Public Interface - May be used in end-application: */
        #if defined(__DOXYGEN__)

-               /** Indicates that the target AVR microcontroller belongs to the Series 2 USB controller
+               /** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller

                 *  (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined.
                 */
                #define USB_SERIES_2_AVR
 
                 *  (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined.
                 */
                #define USB_SERIES_2_AVR
 

-               /** Indicates that the target AVR microcontroller belongs to the Series 4 USB controller
+               /** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller

                 *  (i.e. ATMEGAxxU4) when defined.
                 */
                #define USB_SERIES_4_AVR
 
                 *  (i.e. ATMEGAxxU4) when defined.
                 */
                #define USB_SERIES_4_AVR
 

-               /** Indicates that the target AVR microcontroller belongs to the Series 6 USB controller
+               /** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller

                 *  (i.e. AT90USBxxx6) when defined.
                 */
                #define USB_SERIES_6_AVR
 
                 *  (i.e. AT90USBxxx6) when defined.
                 */
                #define USB_SERIES_6_AVR
 

-               /** Indicates that the target AVR microcontroller belongs to the Series 7 USB controller
+               /** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller

                 *  (i.e. AT90USBxxx7) when defined.
                 */
                #define USB_SERIES_7_AVR
 
                 *  (i.e. AT90USBxxx7) when defined.
                 */
                #define USB_SERIES_7_AVR
 

-               /** Indicates that the target AVR microcontroller and compilation settings allow for the
+               /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller
+                *  (i.e. AT32UC3A0*) when defined.
+                */
+               #define USB_SERIES_UC3A0_AVR
+               
+               /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller
+                *  (i.e. AT32UC3A1*) when defined.
+                */
+               #define USB_SERIES_UC3A1_AVR
+
+               /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller
+                *  (i.e. AT32UC3A3*) when defined.
+                */
+               #define USB_SERIES_UC3A3_AVR
+
+               /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller
+                *  (i.e. AT32UC3B0*) when defined.
+                */
+               #define USB_SERIES_UC3B0_AVR
+
+               /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller
+                *  (i.e. AT32UC3B1*) when defined.
+                */
+               #define USB_SERIES_UC3B1_AVR
+
+               /** Indicates that the target microcontroller and compilation settings allow for the

                 *  target to be configured in USB Device mode when defined.
                 */
                #define USB_CAN_BE_DEVICE
 
                 *  target to be configured in USB Device mode when defined.
                 */
                #define USB_CAN_BE_DEVICE
 

-               /** Indicates that the target AVR microcontroller and compilation settings allow for the
+               /** Indicates that the target microcontroller and compilation settings allow for the

                 *  target to be configured in USB Host mode when defined.
                 */
                #define USB_CAN_BE_HOST
 
                 *  target to be configured in USB Host mode when defined.
                 */
                #define USB_CAN_BE_HOST
 

-               /** Indicates that the target AVR microcontroller and compilation settings allow for the
+               /** Indicates that the target microcontroller and compilation settings allow for the

                 *  target to be configured in either USB Device or Host mode when defined.
                 */
                #define USB_CAN_BE_BOTH
                 *  target to be configured in either USB Device or Host mode when defined.
                 */
                #define USB_CAN_BE_BOTH


@@ -100,39 +131,87 @@
                        #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__)  || \
                             defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))
                                #define USB_SERIES_2_AVR
                        #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__)  || \
                             defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))
                                #define USB_SERIES_2_AVR

+                               #define USB_CAN_BE_DEVICE

                        #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))
                                #define USB_SERIES_4_AVR
                        #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))
                                #define USB_SERIES_4_AVR

+                               #define USB_CAN_BE_DEVICE

                        #elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
                                #define USB_SERIES_6_AVR
                        #elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
                                #define USB_SERIES_6_AVR

+                               #define USB_CAN_BE_DEVICE

                        #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
                                #define USB_SERIES_7_AVR
                        #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
                                #define USB_SERIES_7_AVR

-                       #endif
-
-                       #if !defined(USB_SERIES_7_AVR)
-                               #if defined(USB_HOST_ONLY)
-                                       #error USB_HOST_ONLY is not available for the currently selected USB AVR model.
-                               #endif
-
-                               #if !defined(USB_DEVICE_ONLY)
-                                       #define USB_DEVICE_ONLY
-                               #endif
-                       #endif
-
-                       #if (!defined(USB_DEVICE_ONLY) && !defined(USB_HOST_ONLY))
-                               #define USB_CAN_BE_BOTH
+                               #define USB_CAN_BE_DEVICE
+                               #define USB_CAN_BE_HOST
+                       #elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \
+                              defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__))
+                               #define USB_SERIES_UC3A0_AVR32
+                               #define USB_CAN_BE_DEVICE
+                               #define USB_CAN_BE_HOST
+                       #elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \
+                              defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__))
+                               #define USB_SERIES_UC3A1_AVR32
+                               #define USB_CAN_BE_DEVICE
+                               #define USB_CAN_BE_HOST
+                       #elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \
+                              defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \
+                              defined(__AVR32_UC3A364__)  || defined(__AVR32_UC3A364S__))
+                               #define USB_SERIES_UC3A3_AVR32
+                               #define USB_CAN_BE_DEVICE
+                               #define USB_CAN_BE_HOST
+                       #elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \
+                              defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \
+                              defined(__AVR32_UC3A464__)  || defined(__AVR32_UC3A464S__))
+                               #define USB_SERIES_UC3A4_AVR32
+                               #define USB_CAN_BE_DEVICE

                                #define USB_CAN_BE_HOST
                                #define USB_CAN_BE_HOST

+                       #elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \
+                              defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__))
+                               #define USB_SERIES_UC3B0_AVR32

                                #define USB_CAN_BE_DEVICE
                                #define USB_CAN_BE_DEVICE

-                       #elif defined(USB_HOST_ONLY)

                                #define USB_CAN_BE_HOST
                                #define USB_CAN_BE_HOST

-                       #elif defined(USB_DEVICE_ONLY)
+                       #elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \
+                              defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__))
+                               #define USB_SERIES_UC3B1_AVR32

                                #define USB_CAN_BE_DEVICE
                                #define USB_CAN_BE_DEVICE

+                               #define USB_CAN_BE_HOST
+                       #endif
+                       
+                       #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST))
+                               #define USB_CAN_BE_BOTH
+                       #endif
+
+                       #if defined(USB_HOST_ONLY)
+                               #if !defined(USB_CAN_BE_HOST)
+                                       #error USB_HOST_ONLY is not available for the currently selected microcontroller model.
+                               #else
+                                       #undef USB_CAN_BE_DEVICE
+                                       #undef USB_CAN_BE_BOTH
+                               #endif

                        #endif
 
                        #endif
 

+                       #if defined(USB_DEVICE_ONLY)
+                               #if !defined(USB_CAN_BE_DEVICE)
+                                       #error USB_DEVICE_ONLY is not available for the currently selected microcontroller model.
+                               #else
+                                       #undef USB_CAN_BE_HOST
+                                       #undef USB_CAN_BE_BOTH
+                               #endif
+                       #endif
+                       

                        #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))
                                #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.
                        #endif
                        #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))
                                #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.
                        #endif

+
+                       #if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST))
+                               #error The currently selected device or architecture is not supported under the USB component of the library.
+                       #endif

        #endif
 
        #endif
 

+       /* Disable C linkage for C++ Compilers: */
+               #if defined(__cplusplus)
+                       }
+               #endif
+

 #endif
 
 /** @} */
 #endif
 
 /** @} */