Update Atmel Studio blob - use sane method to extract the extension's bundled Getting...

[pub/USBasp.git] / Demos / Device / LowLevel / DualVirtualSerial / DualVirtualSerial.c

diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
index bf80749..a803b41 100644 (file)
--- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
+++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2013.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2013  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -18,7 +18,7 @@
   advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
-  The author disclaim all warranties with regard to this
+  The author disclaims all warranties with regard to this
   software, including all implied warranties of merchantability
   and fitness.  In no event shall the author be liable for any
   special, indirect or consequential damages or any damages
@@ -44,10 +44,10 @@
  *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
  *  serial link characteristics and instead sends and receives data in endpoint streams.
  */
-CDC_LineEncoding_t LineEncoding1 = { .BaudRateBPS = 0,
-                                     .CharFormat  = CDC_LINEENCODING_OneStopBit,
-                                     .ParityType  = CDC_PARITY_None,
-                                     .DataBits    = 8                            };
+static CDC_LineEncoding_t LineEncoding1 = { .BaudRateBPS = 0,
+                                            .CharFormat  = CDC_LINEENCODING_OneStopBit,
+                                            .ParityType  = CDC_PARITY_None,
+                                            .DataBits    = 8                            };
 
 /** Contains the current baud rate and other settings of the second virtual serial port. While this demo does not use
  *  the physical USART and thus does not use these settings, they must still be retained and returned to the host
@@ -57,10 +57,10 @@ CDC_LineEncoding_t LineEncoding1 = { .BaudRateBPS = 0,
  *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
  *  serial link characteristics and instead sends and receives data in endpoint streams.
  */
-CDC_LineEncoding_t LineEncoding2 = { .BaudRateBPS = 0,
-                                     .CharFormat  = CDC_LINEENCODING_OneStopBit,
-                                     .ParityType  = CDC_PARITY_None,
-                                     .DataBits    = 8                            };
+static CDC_LineEncoding_t LineEncoding2 = { .BaudRateBPS = 0,
+                                            .CharFormat  = CDC_LINEENCODING_OneStopBit,
+                                            .ParityType  = CDC_PARITY_None,
+                                            .DataBits    = 8                            };
 
 
 /** Main program entry point. This routine configures the hardware required by the application, then
@@ -71,7 +71,7 @@ int main(void)
        SetupHardware();
 
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-       sei();
+       GlobalInterruptEnable();
 
        for (;;)
        {
@@ -123,20 +123,14 @@ void EVENT_USB_Device_ConfigurationChanged(void)
        bool ConfigSuccess = true;
 
        /* Setup first CDC Interface's Endpoints */
-       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
-                                                   CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE);
-       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
-                                                   CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE);
-       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
-                                                   CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE);
+       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
 
        /* Setup second CDC Interface's Endpoints */
-       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
-                                                   CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE);
-       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
-                                                   CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE);
-       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
-                                                   CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE);
+       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
+       ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1);
 
        /* Reset line encoding baud rates so that the host knows to send new values */
        LineEncoding1.BaudRateBPS = 0;
@@ -224,10 +218,10 @@ void CDC1_Task(void)
                ActionSent = true;
 
                /* Select the Serial Tx Endpoint */
-               Endpoint_SelectEndpoint(CDC1_TX_EPNUM);
+               Endpoint_SelectEndpoint(CDC1_TX_EPADDR);
 
                /* Write the String to the Endpoint */
-               Endpoint_Write_Stream_LE(ReportString, strlen(ReportString));
+               Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL);
 
                /* Finalize the stream transfer to send the last packet */
                Endpoint_ClearIN();
@@ -240,7 +234,7 @@ void CDC1_Task(void)
        }
 
        /* Select the Serial Rx Endpoint */
-       Endpoint_SelectEndpoint(CDC1_RX_EPNUM);
+       Endpoint_SelectEndpoint(CDC1_RX_EPADDR);
 
        /* Throw away any received data from the host */
        if (Endpoint_IsOUTReceived())
@@ -257,7 +251,7 @@ void CDC2_Task(void)
          return;
 
        /* Select the Serial Rx Endpoint */
-       Endpoint_SelectEndpoint(CDC2_RX_EPNUM);
+       Endpoint_SelectEndpoint(CDC2_RX_EPADDR);
 
        /* Check to see if any data has been received */
        if (Endpoint_IsOUTReceived())
@@ -269,16 +263,16 @@ void CDC2_Task(void)
                uint16_t DataLength = Endpoint_BytesInEndpoint();
 
                /* Read in the incoming packet into the buffer */
-               Endpoint_Read_Stream_LE(&Buffer, DataLength);
+               Endpoint_Read_Stream_LE(&Buffer, DataLength, NULL);
 
                /* Finalize the stream transfer to send the last packet */
                Endpoint_ClearOUT();
 
                /* Select the Serial Tx Endpoint */
-               Endpoint_SelectEndpoint(CDC2_TX_EPNUM);
+               Endpoint_SelectEndpoint(CDC2_TX_EPADDR);
 
                /* Write the received data to the endpoint */
-               Endpoint_Write_Stream_LE(&Buffer, DataLength);
+               Endpoint_Write_Stream_LE(&Buffer, DataLength, NULL);
 
                /* Finalize the stream transfer to send the last packet */
                Endpoint_ClearIN();