Fix incorrect macro guard in the UC3 EndpointStream header file.

[pub/USBasp.git] / Projects / XPLAINBridge / XPLAINBridge.c

diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index 25307d3..41ebabd 100644 (file)
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -67,13 +67,13 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 RingBuffer_t USBtoUART_Buffer;
 
 /** Underlying data buffer for \ref USBtoUART_Buffer, where the stored bytes are located. */
 RingBuffer_t USBtoUART_Buffer;
 
 /** Underlying data buffer for \ref USBtoUART_Buffer, where the stored bytes are located. */

-uint8_t      USBtoUART_Buffer_Data[128];
+static uint8_t      USBtoUART_Buffer_Data[128];

 
 /** Circular buffer to hold data from the serial port before it is sent to the host. */
 RingBuffer_t UARTtoUSB_Buffer;
 
 /** Underlying data buffer for \ref UARTtoUSB_Buffer, where the stored bytes are located. */
 
 /** Circular buffer to hold data from the serial port before it is sent to the host. */
 RingBuffer_t UARTtoUSB_Buffer;
 
 /** Underlying data buffer for \ref UARTtoUSB_Buffer, where the stored bytes are located. */

-uint8_t      UARTtoUSB_Buffer_Data[128];
+static uint8_t      UARTtoUSB_Buffer_Data[128];

 
 
 /** Main program entry point. This routine contains the overall program flow, including initial
 
 
 /** Main program entry point. This routine contains the overall program flow, including initial


@@ -181,7 +181,7 @@ void SetupHardware(void)
 
        /* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */
        PORTF |= (1 << 7);
 
        /* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */
        PORTF |= (1 << 7);

-       _delay_ms(10);
+       Delay_MS(10);

 
        /* Select the firmware mode based on the JTD pin's value */
        CurrentFirmwareMode = (PINF & (1 << 7)) ? MODE_USART_BRIDGE : MODE_PDI_PROGRAMMER;
 
        /* Select the firmware mode based on the JTD pin's value */
        CurrentFirmwareMode = (PINF & (1 << 7)) ? MODE_USART_BRIDGE : MODE_PDI_PROGRAMMER;