Fix C++ builds, XPLAINBridge project.
[pub/USBasp.git] / Projects / AVRISP-MKII / AVRISP-MKII.c
index 82325e5..9e03b38 100644 (file)
 
 #include "AVRISP-MKII.h"
 
 
 #include "AVRISP-MKII.h"
 
+#if (BOARD != BOARD_NONE)
+  /* Some board hardware definitions (e.g. the Arduino Micro) have their LEDs defined on the same pins
+     as the ISP, PDI or TPI interfaces (see the accompanying project documentation). If a board other
+     than NONE is selected (to enable the LED driver with the programmer) you should double-check that
+     no conflicts will occur. If there is a conflict, turn off the LEDs (set BOARD to NONE in the makefile)
+     or define a custom board driver (see the LUFA manual) with alternative LED mappings.
+  */
+  #warning Board specific drivers have been selected; make sure the board LED driver does not conflict with the programmer ISP/PDI/TPI interfaces.
+#endif
+
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
  */
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
  */
@@ -147,7 +157,7 @@ void AVRISP_Task(void)
  *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found
  */
 uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
  *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found
  */
 uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint8_t wIndex,
+                                    const uint16_t wIndex,
                                     const void** const DescriptorAddress,
                                     uint8_t* DescriptorMemorySpace)
 {
                                     const void** const DescriptorAddress,
                                     uint8_t* DescriptorMemorySpace)
 {