Oops: Really disable building of Projects/Host/ClassDriver directory in the Projects...

[pub/USBasp.git] / Demos / OTG / TestApp / TestApp.c

diff --git a/Demos/OTG/TestApp/TestApp.c b/Demos/OTG/TestApp/TestApp.c
index d5a7523..562348b 100644 (file)
--- a/Demos/OTG/TestApp/TestApp.c
+++ b/Demos/OTG/TestApp/TestApp.c
@@ -36,20 +36,30 @@
 \r
 #include "TestApp.h"\r
 \r
 \r
 #include "TestApp.h"\r
 \r

-/* Scheduler Task List */\r
-TASK_LIST\r
-{\r
-       { Task: TestApp_CheckJoystick, TaskStatus: TASK_RUN  },\r
-       { Task: TestApp_CheckHWB     , TaskStatus: TASK_RUN  },\r
-       { Task: TestApp_CheckTemp    , TaskStatus: TASK_RUN  },\r
-       { Task: USB_USBTask          , TaskStatus: TASK_RUN  },\r
-};\r
-\r

 /** Main program entry point. This routine configures the hardware required by the application, then\r
  *  starts the scheduler to run the application tasks.\r
  */\r
 int main(void)\r
 {\r
 /** Main program entry point. This routine configures the hardware required by the application, then\r
  *  starts the scheduler to run the application tasks.\r
  */\r
 int main(void)\r
 {\r

+       SetupHardware();\r
+       \r
+       puts_P(PSTR(ESC_FG_CYAN "LUFA Demo running.\r\n" ESC_FG_WHITE));\r
+\r
+       for (;;)\r
+       {\r
+               CheckJoystick();\r
+               CheckButton();\r
+               CheckTemperature();\r
+\r
+               /* Clear millisecond timer's Output Compare flag (logic 1 clears the flag) */\r
+               TIFR0 |= (1 << OCF0A);\r
+               \r
+               USB_USBTask();\r
+       }\r
+}\r
+\r
+void SetupHardware(void)\r
+{\r

        /* Disable watchdog if enabled by bootloader/fuses */\r
        MCUSR &= ~(1 << WDRF);\r
        wdt_disable();\r
        /* Disable watchdog if enabled by bootloader/fuses */\r
        MCUSR &= ~(1 << WDRF);\r
        wdt_disable();\r


@@ -63,43 +73,22 @@ int main(void)
        Temperature_Init();\r
        Joystick_Init();\r
        LEDs_Init();\r
        Temperature_Init();\r
        Joystick_Init();\r
        LEDs_Init();\r

-       HWB_Init();\r
+       Buttons_Init();\r

        \r
        \r

-       /* Millisecond timer initialization, with output compare interrupt enabled */\r
+       /* Millisecond timer initialization */\r

        OCR0A  = 0x7D;\r
        TCCR0A = (1 << WGM01);\r
        TCCR0B = ((1 << CS01) | (1 << CS00));\r
        OCR0A  = 0x7D;\r
        TCCR0A = (1 << WGM01);\r
        TCCR0B = ((1 << CS01) | (1 << CS00));\r

-       TIMSK0 = (1 << OCIE0A);\r
-       \r
-       /* Turn on interrupts */\r
-       sei();\r
-\r
-    /* Start-up message via USART */\r
-       puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY\r
-              "LUFA Demo running.\r\n" ESC_INVERSE_OFF));\r
-\r
-       /* Scheduling - routine never returns, so put this last in the main function */\r
-       Scheduler_Start();\r
-}\r
-\r
-/** ISR for the timer 0 compare vector. This ISR fires once each millisecond, and increments the\r
- *  scheduler tick counter.\r
- */\r
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)\r
-{\r
-       /* Scheduler test - increment scheduler tick counter once each millisecond */\r
-       Scheduler_TickCounter++;\r

 }\r
 \r
 /** Task responsible for checking the joystick position, and displaying the joystick position onto the\r
  *  board LEDs.\r
  */\r
 }\r
 \r
 /** Task responsible for checking the joystick position, and displaying the joystick position onto the\r
  *  board LEDs.\r
  */\r

-TASK(TestApp_CheckJoystick)\r
+void CheckJoystick(void)\r

 {\r
        uint8_t JoyStatus_LCL = Joystick_GetStatus();\r
 {\r
        uint8_t JoyStatus_LCL = Joystick_GetStatus();\r

-       uint8_t LEDMask       = 0;\r
+       uint8_t LEDMask       = LEDS_NO_LEDS;\r

                \r
                \r

-       /* Test of the Joystick - change a mask in response to joystick */\r

        if (JoyStatus_LCL & JOY_UP)\r
          LEDMask |= LEDS_LED1;\r
                \r
        if (JoyStatus_LCL & JOY_UP)\r
          LEDMask |= LEDS_LED1;\r
                \r


@@ -115,78 +104,63 @@ TASK(TestApp_CheckJoystick)
        if (JoyStatus_LCL & JOY_PRESS)\r
          LEDMask  = LEDS_ALL_LEDS;\r
 \r
        if (JoyStatus_LCL & JOY_PRESS)\r
          LEDMask  = LEDS_ALL_LEDS;\r
 \r

-       /* Test of LEDs - light up in response to joystick */\r

        LEDs_SetAllLEDs(LEDMask);\r
 }\r
 \r
 /** Task responsible for checking the current temperature via the temperature sensor mounted on the\r
  *  board, and displaying it through the serial USART.\r
  */\r
        LEDs_SetAllLEDs(LEDMask);\r
 }\r
 \r
 /** Task responsible for checking the current temperature via the temperature sensor mounted on the\r
  *  board, and displaying it through the serial USART.\r
  */\r

-TASK(TestApp_CheckTemp)\r
+void CheckTemperature(void)\r

 {\r
 {\r

-       static SchedulerDelayCounter_t DelayCounter = 10000; // Force immediate run on start-up\r
+       static uint16_t MSElapsed = 0;\r
+\r
+       /* Timer 0's compare flag is set every millisecond */\r
+       if (TIFR0 & (1 << OCF0A))\r
+         MSElapsed++;\r

 \r
        /* Task runs every 10000 ticks, 10 seconds for this demo */\r
 \r
        /* Task runs every 10000 ticks, 10 seconds for this demo */\r

-       if (Scheduler_HasDelayElapsed(10000, &DelayCounter))\r
+       if (MSElapsed == 10000)\r

        {\r
                printf_P(PSTR("Current temperature: %d Degrees Celcius\r\n\r\n"),\r
                         (int8_t)Temperature_GetTemperature());\r
 \r
        {\r
                printf_P(PSTR("Current temperature: %d Degrees Celcius\r\n\r\n"),\r
                         (int8_t)Temperature_GetTemperature());\r
 \r

-               /* Reset the delay counter, ready to count another 10000 tick interval */\r
-               Scheduler_ResetDelay(&DelayCounter);\r
+               MSElapsed = 0;\r

        }       \r
 }\r
 \r
        }       \r
 }\r
 \r

-/** Task responsible for checking the HWB button position, and start-stopping other tasks and the USB\r
+/** Task responsible for checking the board's first button' position, and start-stopping other tasks and the USB\r

  *  interface in response to user joystick movements.\r
  */\r
  *  interface in response to user joystick movements.\r
  */\r

-TASK(TestApp_CheckHWB)\r
+void CheckButton(void)\r

 {\r
 {\r

-       static SchedulerDelayCounter_t DelayCounter = 0;\r
-       static bool                    IsPressed;\r
-       static bool                    BlockingJoystickTask;\r
+       static uint16_t DebounceMSElapsed = 0;\r
+       static bool     IsPressed;\r

        \r
        \r

-       /* Check if HWB pressed (start USB) */\r
-       if (HWB_GetStatus() == true)\r
+       /* Timer 0's compare flag is set every millisecond */\r
+       if (TIFR0 & (1 << OCF0A))\r
+         DebounceMSElapsed++;\r
+\r
+       if (Buttons_GetStatus() & BUTTONS_BUTTON1)\r

        {\r
        {\r

-               /* Debounce - check 100 ticks later to see if button is still being pressed */\r
-               if ((IsPressed == false) && (Scheduler_HasDelayElapsed(100, &DelayCounter)))\r
+               if (!(IsPressed) && (DebounceMSElapsed == 100))\r

                {\r
                {\r

-                       /* Set flag, indicating that current pressed state has been handled */\r

                        IsPressed = true;\r
                        IsPressed = true;\r

-                       \r
-                       /* First start of the USB interface permanently blocks the joystick task */\r
-                       if (BlockingJoystickTask == false)\r
-                       {\r
-                               Scheduler_SetTaskMode(TestApp_CheckJoystick, TASK_STOP);\r
-                               BlockingJoystickTask = true;\r
-                       }\r

 \r
 \r

-                       /* Toggle USB interface */\r

                        if (USB_IsInitialized == true)\r
                        {\r
                                USB_ShutDown();\r
                        if (USB_IsInitialized == true)\r
                        {\r
                                USB_ShutDown();\r

-\r
-                               LEDs_SetAllLEDs(LEDS_LED1);\r
-                               puts_P(PSTR(ESC_BG_WHITE "USB Power Off.\r\n"));\r
-                               \r
-                               Scheduler_SetTaskMode(TestApp_CheckTemp, TASK_RUN);\r
+                               puts_P(PSTR(ESC_FG_YELLOW "USB Power Off.\r\n" ESC_FG_WHITE));\r

                        }\r
                        else\r
                        {\r
                        }\r
                        else\r
                        {\r

-                               Scheduler_SetTaskMode(TestApp_CheckTemp, TASK_STOP);\r
-\r
-                               LEDs_SetAllLEDs(LEDS_LED2 | LEDS_LED3);\r
-                               puts_P(PSTR(ESC_BG_YELLOW "USB Power On.\r\n"));\r
-                               \r
+                               puts_P(PSTR(ESC_FG_YELLOW "USB Power On.\r\n" ESC_FG_WHITE));                           \r

                                USB_Init(USB_MODE_UID, USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL);\r
                        }\r
                }\r
        }\r
     else\r
     {\r
                                USB_Init(USB_MODE_UID, USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL);\r
                        }\r
                }\r
        }\r
     else\r
     {\r

-               /* HWB not pressed - reset debounce interval counter and press handled flag */\r
-               Scheduler_ResetDelay(&DelayCounter);\r
+               DebounceMSElapsed = 0;\r

                IsPressed = false;\r
        }\r
 }\r
                IsPressed = false;\r
        }\r
 }\r