Add TCP retransmission support to the HTTP webserver in the Webserver project, so...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGTarget.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 1406428..0f590c7 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -96,7 +96,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
 }\r
 \r
 /** ISR to manage the TPI software USART when bit-banged TPI USART mode is selected. */\r
-ISR(TIMER1_COMPB_vect, ISR_BLOCK)\r
+ISR(TIMER1_CAPT_vect, ISR_BLOCK)\r
 {\r
        /* Toggle CLOCK pin in a single cycle (see AVR datasheet) */\r
        BITBANG_TPICLOCK_PIN |= BITBANG_TPICLOCK_MASK;\r
@@ -209,10 +209,10 @@ void XPROGTarget_EnableTargetTPI(void)
        /* Set DATA line high for idle state */\r
        BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;\r
 \r
-       /* Fire timer capture channel B ISR to manage the software USART */\r
-       OCR1B   = BITS_BETWEEN_USART_CLOCKS;\r
-       TCCR1B  = (1 << WGM12) | (1 << CS10);\r
-       TIMSK1  = (1 << OCIE1B);\r
+       /* Fire timer capture channel ISR to manage the software USART */\r
+       ICR1    = BITS_BETWEEN_USART_CLOCKS;\r
+       TCCR1B  = (1 << WGM13) | (1 << WGM12) | (1 << CS10);\r
+       TIMSK1  = (1 << ICIE1);\r
 #endif\r
 \r
        /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */\r