Added support for the DorkbotPDX Duce board.

[pub/USBasp.git] / Bootloaders / CDC / BootloaderCDC.c

diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c
index f336a13..a7fc883 100644 (file)
--- a/Bootloaders/CDC/BootloaderCDC.c
+++ b/Bootloaders/CDC/BootloaderCDC.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -63,10 +63,6 @@ static bool RunBootloader = true;
  */
 int main(void)
 {
-       /* Force a reference to the API jump table to prevent the linker from discarding it */
-       uint8_t* volatile Dummy = BootloaderAPI_JumpTable;
-       (void)Dummy;
-
        /* Setup hardware required for the bootloader */
        SetupHardware();
 
@@ -92,7 +88,7 @@ int main(void)
 }
 
 /** Configures all hardware required for the bootloader. */
-void SetupHardware(void)
+static void SetupHardware(void)
 {
        /* Disable watchdog if enabled by bootloader/fuses */
        MCUSR &= ~(1 << WDRF);
@@ -105,13 +101,13 @@ void SetupHardware(void)
        MCUCR = (1 << IVCE);
        MCUCR = (1 << IVSEL);
 
-       /* Initialize USB Subsystem */
+       /* Initialize the USB and other board hardware drivers */
        USB_Init();
        LEDs_Init();
-       
+
        /* Bootloader active LED toggle timer initialization */
        TIMSK1 = (1 << TOIE1);
-       TCCR1B = ((1 << CS11) | (1 << CS10));   
+       TCCR1B = ((1 << CS11) | (1 << CS10));
 }
 
 /** ISR to periodically toggle the LEDs on the board to indicate that the bootloader is active. */
@@ -126,17 +122,12 @@ ISR(TIMER1_OVF_vect, ISR_BLOCK)
 void EVENT_USB_Device_ConfigurationChanged(void)
 {
        /* Setup CDC Notification, Rx and Tx Endpoints */
-       Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT,
-                                  ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE,
-                                  ENDPOINT_BANK_SINGLE);
+       Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT,
+                                  CDC_NOTIFICATION_EPSIZE, 1);
 
-       Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK,
-                                  ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE,
-                                  ENDPOINT_BANK_SINGLE);
+       Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
 
-       Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK,
-                                  ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE,
-                                  ENDPOINT_BANK_SINGLE);
+       Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);
 }
 
 /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
@@ -270,7 +261,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
                                {
                                        LowByte = FetchNextCommandByte();
                                }
-                               
+
                                HighByte = !HighByte;
                        }
                        else
@@ -307,7 +298,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
 static uint8_t FetchNextCommandByte(void)
 {
        /* Select the OUT endpoint so that the next data byte can be read */
-       Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_RX_EPADDR);
 
        /* If OUT endpoint empty, clear it and wait for the next packet from the host */
        while (!(Endpoint_IsReadWriteAllowed()))
@@ -333,7 +324,7 @@ static uint8_t FetchNextCommandByte(void)
 static void WriteNextResponseByte(const uint8_t Response)
 {
        /* Select the IN endpoint so that the next data byte can be written */
-       Endpoint_SelectEndpoint(CDC_TX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_TX_EPADDR);
 
        /* If IN endpoint full, clear it and wait until ready for the next packet to the host */
        if (!(Endpoint_IsReadWriteAllowed()))
@@ -354,10 +345,10 @@ static void WriteNextResponseByte(const uint8_t Response)
 /** Task to read in AVR910 commands from the CDC data OUT endpoint, process them, perform the required actions
  *  and send the appropriate response back to the host.
  */
-void CDC_Task(void)
+static void CDC_Task(void)
 {
        /* Select the OUT endpoint */
-       Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_RX_EPADDR);
 
        /* Check if endpoint has a command in it sent from the host */
        if (!(Endpoint_IsOUTReceived()))
@@ -369,7 +360,7 @@ void CDC_Task(void)
        if (Command == 'E')
        {
                RunBootloader = false;
-       
+
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
@@ -553,7 +544,7 @@ void CDC_Task(void)
        }
 
        /* Select the IN endpoint */
-       Endpoint_SelectEndpoint(CDC_TX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_TX_EPADDR);
 
        /* Remember if the endpoint is completely full before clearing it */
        bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
@@ -581,7 +572,7 @@ void CDC_Task(void)
        }
 
        /* Select the OUT endpoint */
-       Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_RX_EPADDR);
 
        /* Acknowledge the command from the host */
        Endpoint_ClearOUT();