Make a new general RingBuffer.h misc library driver, instead of the per-application...

[pub/USBasp.git] / Projects / XPLAINBridge / XPLAINBridge.c

diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index 912e683..c71a421 100644 (file)
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -66,9 +66,15 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 /** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
 RingBuff_t USBtoUART_Buffer;
 
+/** Underlying data buffer for \ref USBtoUART_Buffer, where the stored bytes are located. */
+uint8_t    USBtoUART_Buffer_Data[128];
+
 /** Circular buffer to hold data from the serial port before it is sent to the host. */
 RingBuff_t UARTtoUSB_Buffer;
 
+/** Underlying data buffer for \ref UARTtoUSB_Buffer, where the stored bytes are located. */
+uint8_t    UARTtoUSB_Buffer_Data[128];
+
 
 /** Main program entry point. This routine contains the overall program flow, including initial
  *  setup of all components and the main program loop.
@@ -130,7 +136,7 @@ void UARTBridge_Task(void)
        }
        
        /* Check if the UART receive buffer flush timer has expired or buffer is nearly full */
-       RingBuff_Count_t BufferCount = RingBuffer_GetCount(&UARTtoUSB_Buffer);
+       uint16_t BufferCount = RingBuffer_GetCount(&UARTtoUSB_Buffer);
        if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200))
        {
                /* Clear flush timer expiry flag */
@@ -199,8 +205,8 @@ void EVENT_USB_Device_ConfigurationChanged(void)
                TCCR0B = ((1 << CS02) | (1 << CS00));
 
                /* Initialize ring buffers used to hold serial data between USB and software UART interfaces */
-               RingBuffer_InitBuffer(&USBtoUART_Buffer);
-               RingBuffer_InitBuffer(&UARTtoUSB_Buffer);
+               RingBuffer_InitBuffer(&USBtoUART_Buffer, USBtoUART_Buffer_Data, sizeof(USBtoUART_Buffer_Data));
+               RingBuffer_InitBuffer(&UARTtoUSB_Buffer, UARTtoUSB_Buffer_Data, sizeof(UARTtoUSB_Buffer_Data));
 
                /* Start the software USART */
                SoftUART_Init();