/** \file
* \brief ADC peripheral driver for the U7, U6 and U4 USB AVRs.
*
- * ADC driver for the AT90USB1287, AT90USB1286, AT90USB647, AT90USB646, ATMEGA16U4 and ATMEGA32U4 AVRs.
+ * On-chip Analogue-to-Digital converter (ADC) driver for supported U4, U6 and U7 model AVRs that contain an ADC
+ * peripheral internally.
*
* \note This file should not be included directly. It is automatically included as needed by the ADC driver
* dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
/** \ingroup Group_ADC
* @defgroup Group_ADC_AVRU4U6U7 Series U4, U6 and U7 Model ADC Driver
*
- * ADC driver for the AT90USB1287, AT90USB1286, AT90USB647, AT90USB646, ATMEGA16U4 and ATMEGA32U4 AVRs.
+ * On-chip Analogue-to-Digital converter (ADC) driver for supported U4, U6 and U7 model AVRs that contain an ADC
+ * peripheral internally.
*
* \note This file should not be included directly. It is automatically included as needed by the ADC driver
* dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
/* Public Interface - May be used in end-application: */
/* Macros: */
/** Reference mask, for using the voltage present at the AVR's AREF pin for the ADC reference. */
- #define ADC_REFERENCE_AREF 0
+ #define ADC_REFERENCE_AREF 0
/** Reference mask, for using the voltage present at the AVR's AVCC pin for the ADC reference. */
- #define ADC_REFERENCE_AVCC (1 << REFS0)
+ #define ADC_REFERENCE_AVCC (1 << REFS0)
/** Reference mask, for using the internally generated 2.56V reference voltage as the ADC reference. */
- #define ADC_REFERENCE_INT2560MV ((1 << REFS1)| (1 << REFS0))
+ #define ADC_REFERENCE_INT2560MV ((1 << REFS1) | (1 << REFS0))
/** Left-adjusts the 10-bit ADC result, so that the upper 8 bits of the value returned by the
* ADC_GetResult() macro contain the 8 most significant bits of the result. */
- #define ADC_LEFT_ADJUSTED (1 << ADLAR)
+ #define ADC_LEFT_ADJUSTED (1 << ADLAR)
/** Right-adjusts the 10-bit ADC result, so that the lower 8 bits of the value returned by the
* ADC_GetResult() macro contain the 8 least significant bits of the result. */
- #define ADC_RIGHT_ADJUSTED (0 << ADLAR)
+ #define ADC_RIGHT_ADJUSTED (0 << ADLAR)
/** Sets the ADC mode to free running, so that conversions take place continuously as fast as the ADC
* is capable of at the given input clock speed. */
- #define ADC_FREE_RUNNING (1 << ADATE)
+ #define ADC_FREE_RUNNING (1 << ADATE)
/** Sets the ADC mode to single conversion, so that only a single conversion will take place before
* the ADC returns to idle. */
- #define ADC_SINGLE_CONVERSION (0 << ADATE)
+ #define ADC_SINGLE_CONVERSION (0 << ADATE)
/** Sets the ADC input clock to prescale by a factor of 2 the AVR's system clock. */
- #define ADC_PRESCALE_2 (1 << ADPS0)
+ #define ADC_PRESCALE_2 (1 << ADPS0)
/** Sets the ADC input clock to prescale by a factor of 4 the AVR's system clock. */
- #define ADC_PRESCALE_4 (1 << ADPS1)
+ #define ADC_PRESCALE_4 (1 << ADPS1)
/** Sets the ADC input clock to prescale by a factor of 8 the AVR's system clock. */
- #define ADC_PRESCALE_8 ((1 << ADPS0) | (1 << ADPS1))
+ #define ADC_PRESCALE_8 ((1 << ADPS0) | (1 << ADPS1))
/** Sets the ADC input clock to prescale by a factor of 16 the AVR's system clock. */
- #define ADC_PRESCALE_16 (1 << ADPS2)
+ #define ADC_PRESCALE_16 (1 << ADPS2)
/** Sets the ADC input clock to prescale by a factor of 32 the AVR's system clock. */
- #define ADC_PRESCALE_32 ((1 << ADPS2) | (1 << ADPS0))
+ #define ADC_PRESCALE_32 ((1 << ADPS2) | (1 << ADPS0))
/** Sets the ADC input clock to prescale by a factor of 64 the AVR's system clock. */
- #define ADC_PRESCALE_64 ((1 << ADPS2) | (1 << ADPS1))
+ #define ADC_PRESCALE_64 ((1 << ADPS2) | (1 << ADPS1))
/** Sets the ADC input clock to prescale by a factor of 128 the AVR's system clock. */
- #define ADC_PRESCALE_128 ((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0))
+ #define ADC_PRESCALE_128 ((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0))
//@{
/** MUX mask define for the ADC0 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
- #define ADC_CHANNEL0 (0x00 << MUX0)
+ #define ADC_CHANNEL0 (0x00 << MUX0)
/** MUX mask define for the ADC1 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
- #define ADC_CHANNEL1 (0x01 << MUX0)
+ #define ADC_CHANNEL1 (0x01 << MUX0)
#if !(defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__DOXYGEN__))
/** MUX mask define for the ADC2 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_CHANNEL2 (0x02 << MUX0)
+ #define ADC_CHANNEL2 (0x02 << MUX0)
/** MUX mask define for the ADC3 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_CHANNEL3 (0x03 << MUX0)
+ #define ADC_CHANNEL3 (0x03 << MUX0)
#endif
/** MUX mask define for the ADC4 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
- #define ADC_CHANNEL4 (0x04 << MUX0)
+ #define ADC_CHANNEL4 (0x04 << MUX0)
/** MUX mask define for the ADC5 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
- #define ADC_CHANNEL5 (0x05 << MUX0)
+ #define ADC_CHANNEL5 (0x05 << MUX0)
/** MUX mask define for the ADC6 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
- #define ADC_CHANNEL6 (0x06 << MUX0)
+ #define ADC_CHANNEL6 (0x06 << MUX0)
/** MUX mask define for the ADC7 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
- #define ADC_CHANNEL7 (0x07 << MUX0)
+ #define ADC_CHANNEL7 (0x07 << MUX0)
/** MUX mask define for the internal 1.1V bandgap channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
- #define ADC_1100MV_BANDGAP (0x1E << MUX0)
+ #define ADC_1100MV_BANDGAP (0x1E << MUX0)
#if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__DOXYGEN__))
/** MUX mask define for the ADC8 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_CHANNEL8 ((1 << 8) | (0x00 << MUX0))
+ #define ADC_CHANNEL8 ((1 << 8) | (0x00 << MUX0))
/** MUX mask define for the ADC9 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_CHANNEL9 ((1 << 8) | (0x01 << MUX0))
+ #define ADC_CHANNEL9 ((1 << 8) | (0x01 << MUX0))
/** MUX mask define for the ADC10 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_CHANNEL10 ((1 << 8) | (0x02 << MUX0))
+ #define ADC_CHANNEL10 ((1 << 8) | (0x02 << MUX0))
/** MUX mask define for the ADC11 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_CHANNEL11 ((1 << 8) | (0x03 << MUX0))
+ #define ADC_CHANNEL11 ((1 << 8) | (0x03 << MUX0))
/** MUX mask define for the ADC12 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_CHANNEL12 ((1 << 8) | (0x04 << MUX0))
+ #define ADC_CHANNEL12 ((1 << 8) | (0x04 << MUX0))
/** MUX mask define for the ADC13 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_CHANNEL13 ((1 << 8) | (0x05 << MUX0))
+ #define ADC_CHANNEL13 ((1 << 8) | (0x05 << MUX0))
/** MUX mask define for the internal temperature sensor channel of the ADC. See \ref ADC_StartReading and
* \ref ADC_GetChannelReading.
*
* \note Not available on all AVR models.
*/
- #define ADC_INT_TEMP_SENS ((1 << 8) | (0x07 << MUX0))
+ #define ADC_INT_TEMP_SENS ((1 << 8) | (0x07 << MUX0))
#endif
//@}
*
* \note The channel number must be specified as an integer, and NOT a ADC_CHANNELx mask.
*
- * \param[in] Channel ADC channel number to set up for conversions.
+ * \param[in] ChannelIndex ADC channel number to set up for conversions.
*/
- static inline void ADC_SetupChannel(const uint8_t Channel)
+ static inline void ADC_SetupChannel(const uint8_t ChannelIndex)
{
#if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
defined(__AVR_ATmega32U6__))
- DDRF &= ~(1 << Channel);
- DIDR0 |= (1 << Channel);
+ DDRF &= ~(1 << ChannelIndex);
+ DIDR0 |= (1 << ChannelIndex);
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
- if (Channel < 8)
+ if (ChannelIndex < 8)
{
- DDRF &= ~(1 << Channel);
- DIDR0 |= (1 << Channel);
+ DDRF &= ~(1 << ChannelIndex);
+ DIDR0 |= (1 << ChannelIndex);
}
- else if (Channel == 8)
+ else if (ChannelIndex == 8)
{
DDRD &= ~(1 << 4);
DIDR2 |= (1 << 0);
}
- else if (Channel < 11)
+ else if (ChannelIndex < 11)
{
- DDRD &= ~(1 << (Channel - 3));
- DIDR2 |= (1 << (Channel - 8));
+ DDRD &= ~(1 << (ChannelIndex - 3));
+ DIDR2 |= (1 << (ChannelIndex - 8));
}
else
{
- DDRB &= ~(1 << (Channel - 7));
- DIDR2 |= (1 << (Channel - 8));
+ DDRB &= ~(1 << (ChannelIndex - 7));
+ DIDR2 |= (1 << (ChannelIndex - 8));
}
#endif
}
*
* \note The channel number must be specified as an integer, and NOT a ADC_CHANNELx mask.
*
- * \param[in] Channel ADC channel number to set up for conversions.
+ * \param[in] ChannelIndex ADC channel number to set up for conversions.
*/
- static inline void ADC_DisableChannel(const uint8_t Channel)
+ static inline void ADC_DisableChannel(const uint8_t ChannelIndex)
{
#if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
defined(__AVR_ATmega32U6__))
- DDRF &= ~(1 << Channel);
- DIDR0 &= ~(1 << Channel);
+ DDRF &= ~(1 << ChannelIndex);
+ DIDR0 &= ~(1 << ChannelIndex);
#elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
- if (Channel < 8)
+ if (ChannelIndex < 8)
{
- DDRF &= ~(1 << Channel);
- DIDR0 &= ~(1 << Channel);
+ DDRF &= ~(1 << ChannelIndex);
+ DIDR0 &= ~(1 << ChannelIndex);
}
- else if (Channel == 8)
+ else if (ChannelIndex == 8)
{
DDRD &= ~(1 << 4);
DIDR2 &= ~(1 << 0);
}
- else if (Channel < 11)
+ else if (ChannelIndex < 11)
{
- DDRD &= ~(1 << (Channel - 3));
- DIDR2 &= ~(1 << (Channel - 8));
+ DDRD &= ~(1 << (ChannelIndex - 3));
+ DIDR2 &= ~(1 << (ChannelIndex - 8));
}
else
{
- DDRB &= ~(1 << (Channel - 7));
- DIDR2 &= ~(1 << (Channel - 8));
+ DDRB &= ~(1 << (ChannelIndex - 7));
+ DIDR2 &= ~(1 << (ChannelIndex - 8));
}
#endif
}
* conversions. If the ADC is in single conversion mode (or the channel to convert from is to be changed),
* this function must be called each time a conversion is to take place.
*
- * \param[in] MUXMask Mask comprising of an ADC channel mask, reference mask and adjustment mask.
+ * \param[in] MUXMask ADC channel mask, reference mask and adjustment mask.
*/
static inline void ADC_StartReading(const uint16_t MUXMask)
{
* The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
* prescaler masks.
*
- * \param[in] Mode Mask of ADC settings, including adjustment, prescale, mode and reference.
+ * \param[in] Mode Mask of ADC prescale and mode settings.
*/
static inline void ADC_Init(uint8_t Mode) ATTR_ALWAYS_INLINE;
static inline void ADC_Init(uint8_t Mode)
projects / pub / USBasp.git / blobdiff