Add OBJDIR optional build variable to the BULD build system module, to allow the...

[pub/USBasp.git] / Demos / Host / ClassDriver / MassStorageHost / MassStorageHost.txt

diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
index 871aa81..4b07261 100644 (file)
--- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
+++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
@@ -3,16 +3,16 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Mass Storage Host Demo
  *
- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
@@ -25,7 +25,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Mass Storage Device</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>Bulk Only</td>
  *   </tr>
@@ -37,23 +37,23 @@
  *        SCSI Block Commands Specification</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
  *
  *  Mass Storage host demonstration application. This gives a simple reference
  *  application for implementing a USB Mass Storage host, for USB storage devices
  *  using the standard Mass Storage USB profile.
- *  
+ *
  *  The first 512 bytes (boot sector) of an attached disk's memory will be dumped
  *  out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
  *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
  *  of the disk will be dumped to the serial port.
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
@@ -65,3 +65,4 @@
  *   </tr>
  *  </table>
  */
+