/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
-
+ Copyright (C) Dean Camera, 2011.
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
*/
/** \file
- * \brief Master include file for the USART peripheral driver.
+ * \brief Hardware Serial USART driver.
+ *
+ * This file is the master dispatch header file for the device-specific USART driver, for microcontrollers
+ * containing a hardware USART.
*
- * Driver for the USART subsystem on supported USB AVRs.
+ * User code should include this file, which will in turn include the correct ADC driver header file for the
+ * currently selected architecture and microcontroller model.
*/
-
+
/** \ingroup Group_PeripheralDrivers
- * @defgroup Group_Serial Serial USART Driver - LUFA/Drivers/Peripheral/Serial.h
+ * \defgroup Group_Serial Serial USART Driver - LUFA/Drivers/Peripheral/Serial.h
+ * \brief Hardware Serial USART driver.
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/Peripheral/Serial.c <i>(Makefile source module name: LUFA_SRC_SERIAL)</i>
+ * - LUFA/Drivers/Peripheral/<i>ARCH</i>/Serial_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_SERIAL)</i>
*
- * \section Module Description
- * Hardware serial USART driver. This module provides an easy to use driver for
- * the setup of and transfer of data over the AVR's USART port.
+ * \section Sec_ModDescription Module Description
+ * Hardware serial USART driver. This module provides an easy to use driver for the setup and transfer
+ * of data over the selected architecture and microcontroller model's USART port.
*
- * @{
+ * \note The exact API for this driver may vary depending on the target used - see
+ * individual target module documentation for the API specific to your target processor.
*/
-
+
#ifndef __SERIAL_H__
#define __SERIAL_H__
+ /* Macros: */
+ #define __INCLUDE_FROM_SERIAL_H
+
/* Includes: */
- #include <avr/io.h>
- #include <avr/pgmspace.h>
- #include <stdbool.h>
-
#include "../../Common/Common.h"
- #include "../Misc/TerminalCodes.h"
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
+ /* Includes: */
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/Serial_AVR8.h"
+ #else
+ #error The Serial peripheral driver is not currently available for your selected architecture.
#endif
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is
- * not set.
- */
- #define SERIAL_UBBRVAL(baud) ((((F_CPU / 16) + (baud / 2)) / (baud)) - 1)
-
- /** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is
- * set.
- */
- #define SERIAL_2X_UBBRVAL(baud) ((((F_CPU / 8) + (baud / 2)) / (baud)) - 1)
-
- /* Function Prototypes: */
- /** Transmits a given string located in program space (FLASH) through the USART.
- *
- * \param[in] FlashStringPtr Pointer to a string located in program space.
- */
- void Serial_TxString_P(const char* FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Transmits a given string located in SRAM memory through the USART.
- *
- * \param[in] StringPtr Pointer to a string located in SRAM space.
- */
- void Serial_TxString(const char* StringPtr) ATTR_NON_NULL_PTR_ARG(1);
-
- /* Inline Functions: */
- /** Initialises the USART, ready for serial data transmission and reception. This initialises the interface to
- * standard 8-bit, no parity, 1 stop bit settings suitable for most applications.
- *
- * \param[in] BaudRate Serial baud rate, in bits per second.
- * \param[in] DoubleSpeed Enables double speed mode when set, halving the sample time to double the baud rate.
- */
- static inline void Serial_Init(const uint32_t BaudRate,
- const bool DoubleSpeed)
- {
- UCSR1A = (DoubleSpeed ? (1 << U2X1) : 0);
- UCSR1B = ((1 << TXEN1) | (1 << RXEN1));
- UCSR1C = ((1 << UCSZ11) | (1 << UCSZ10));
-
- DDRD |= (1 << 3);
- PORTD |= (1 << 2);
-
- UBRR1 = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));
- }
-
- /** Turns off the USART driver, disabling and returning used hardware to their default configuration. */
- static inline void Serial_ShutDown(void)
- {
- UCSR1A = 0;
- UCSR1B = 0;
- UCSR1C = 0;
-
- DDRD &= ~(1 << 3);
- PORTD &= ~(1 << 2);
-
- UBRR1 = 0;
- }
-
- /** Indicates whether a character has been received through the USART.
- *
- * \return Boolean true if a character has been received, false otherwise.
- */
- static inline bool Serial_IsCharReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Serial_IsCharReceived(void)
- {
- return ((UCSR1A & (1 << RXC1)) ? true : false);
- }
-
- /** Transmits a given byte through the USART.
- *
- * \param[in] DataByte Byte to transmit through the USART.
- */
- static inline void Serial_TxByte(const char DataByte) ATTR_ALWAYS_INLINE;
- static inline void Serial_TxByte(const char DataByte)
- {
- while (!(UCSR1A & (1 << UDRE1)));
- UDR1 = DataByte;
- }
-
- /** Receives a byte from the USART.
- *
- * \return Byte received from the USART.
- */
- static inline char Serial_RxByte(void) ATTR_ALWAYS_INLINE;
- static inline char Serial_RxByte(void)
- {
- while (!(UCSR1A & (1 << RXC1)));
- return UDR1;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
#endif
-
-/** @} */
projects / pub / USBasp.git / blobdiff