/*
LUFA Library
- Copyright (C) Dean Camera, 2011.
+ Copyright (C) Dean Camera, 2013.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
- Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
- The author disclaim all warranties with regard to this
+ The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
{
.Config =
{
- .DataOUTPipeNumber = 1,
+ .DataOUTPipe =
+ {
+ .Address = (PIPE_DIR_OUT | 2),
+ },
},
};
puts_P(PSTR(ESC_FG_CYAN "Audio Output Host Demo running.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- sei();
+ GlobalInterruptEnable();
for (;;)
{
- switch (USB_HostState)
- {
- case HOST_STATE_Addressed:
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
- uint16_t ConfigDescriptorSize;
- uint8_t ConfigDescriptorData[512];
-
- if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
- sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
- {
- puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (Audio_Host_ConfigurePipes(&Speaker_Audio_Interface,
- ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)
- {
- puts_P(PSTR("Attached Device Not a Valid Audio Output Device.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Setting Device Configuration.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (Audio_Host_StartStopStreaming(&Speaker_Audio_Interface, true) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Enabling Audio Stream.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
- if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipeNumber,
- AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,
- sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- /* Sample reload timer initialization */
- TIMSK0 = (1 << OCIE0A);
- OCR0A = ((F_CPU / 8 / 48000) - 1);
- TCCR0A = (1 << WGM01); // CTC mode
- TCCR0B = (1 << CS01); // Fcpu/8 speed
-
- puts_P(PSTR("Audio Device Enumerated.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
- USB_HostState = HOST_STATE_Configured;
- break;
- case HOST_STATE_Configured:
- /* Do nothing - audio stream is handled by the timer interrupt routine */
- break;
- }
-
Audio_Host_USBTask(&Speaker_Audio_Interface);
USB_USBTask();
}
#if defined(USE_TEST_TONE)
static uint8_t SquareWaveSampleCount;
static int16_t CurrentWaveValue;
-
+
/* In test tone mode, generate a square wave at 1/256 of the sample rate */
if (SquareWaveSampleCount++ == 0xFF)
CurrentWaveValue ^= 0x8000;
-
+
/* Only generate audio if the board button is being pressed */
AudioSample = (Buttons_GetStatus() & BUTTONS_BUTTON1) ? CurrentWaveValue : 0;
#else
AudioSample -= (SAMPLE_MAX_RANGE / 2);
#endif
#endif
-
- Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);
+
+ Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);
Audio_Host_WriteSample16(&Speaker_Audio_Interface, AudioSample);
}
-
+
Pipe_SelectPipe(PrevPipe);
}
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
+#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
+#endif
/* Hardware Initialization */
Serial_Init(9600, false);
/* Create a stdio stream for the serial port for stdin and stdout */
Serial_CreateStream(NULL);
+
+ /* Start the ADC conversion in free running mode */
+ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL));
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+ uint16_t ConfigDescriptorSize;
+ uint8_t ConfigDescriptorData[512];
+
+ if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
+ sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
+ {
+ puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (Audio_Host_ConfigurePipes(&Speaker_Audio_Interface,
+ ConfigDescriptorSize, ConfigDescriptorData) != AUDIO_ENUMERROR_NoError)
+ {
+ puts_P(PSTR("Attached Device Not a Valid Audio Output Device.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Setting Device Configuration.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (Audio_Host_StartStopStreaming(&Speaker_Audio_Interface, true) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Enabling Audio Stream.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000);
+ if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipe.Address,
+ AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq,
+ sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Setting Audio Sampling Frequency.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ /* Sample reload timer initialization */
+ TIMSK0 = (1 << OCIE0A);
+ OCR0A = ((F_CPU / 8 / 48000) - 1);
+ TCCR0A = (1 << WGM01); // CTC mode
+ TCCR0B = (1 << CS01); // Fcpu/8 speed
+
+ puts_P(PSTR("Audio Device Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
projects / pub / USBasp.git / blobdiff