Removed all user pipe/endpoint interrupt APIs, added internal library support for...

[pub/USBasp.git] / LUFA / Drivers / USB / LowLevel / Pipe.h

diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h
index d5c2094..796b4c5 100644 (file)
--- a/LUFA/Drivers/USB/LowLevel/Pipe.h
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.h
@@ -158,62 +158,6 @@
                         */\r
                        #define PIPE_EPSIZE_MASK                0x7FF\r
 \r
-                       /** Interrupt definition for the pipe SETUP bank ready interrupt (for CONTROL type pipes). Should be\r
-                        *  used with the USB_INT_* macros located in USBInterrupt.h.\r
-                        *\r
-                        *  This interrupt will fire if enabled on an CONTROL type pipe when the pipe is ready for a new\r
-                        *  control request.\r
-                        *\r
-                        *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe\r
-                        *        is selected), and will fire the common pipe interrupt vector.\r
-                        *\r
-                        *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.\r
-                        */\r
-                       #define PIPE_INT_SETUP                 UPIENX, (1 << TXSTPE) , UPINTX, (1 << TXSTPI)\r
-\r
-                       /** Interrupt definition for the pipe error interrupt. Should be used with the USB_INT_* macros\r
-                        *  located in USBInterrupt.h.\r
-                        *\r
-                        *  This interrupt will fire if enabled on a particular pipe if an error occurs on that pipe, such\r
-                        *  as a CRC mismatch error.\r
-                        *\r
-                        *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe\r
-                        *        is selected), and will fire the common pipe interrupt vector.\r
-                        *\r
-                        *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.\r
-                        *\r
-                        *  \see \ref Pipe_GetErrorFlags() for more information on the pipe errors.\r
-                        */\r
-                       #define PIPE_INT_ERROR                 UPIENX, (1 << PERRE), UPINTX, (1 << PERRI)\r
-\r
-                       /** Interrupt definition for the pipe NAK received interrupt. Should be used with the USB_INT_* macros\r
-                        *  located in USBInterrupt.h.\r
-                        *\r
-                        *  This interrupt will fire if enabled on a particular pipe if an attached device returns a NAK in\r
-                        *  response to a sent packet.\r
-                        *\r
-                        *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe\r
-                        *        is selected), and will fire the common pipe interrupt vector.\r
-                        *\r
-                        *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.\r
-                        *\r
-                        *  \see \ref Pipe_IsNAKReceived() for more information on pipe NAKs.\r
-                        */\r
-                       #define PIPE_INT_NAK                   UPIENX, (1 << NAKEDE), UPINTX, (1 << NAKEDI)\r
-\r
-                       /** Interrupt definition for the pipe STALL received interrupt. Should be used with the USB_INT_* macros\r
-                        *  located in USBInterrupt.h.\r
-                        *\r
-                        *  This interrupt will fire if enabled on a particular pipe if an attached device returns a STALL on the\r
-                        *  currently selected pipe. This will also fire if the pipe is an isochronous pipe and a CRC error occurs.\r
-                        *\r
-                        *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe\r
-                        *        is selected), and will fire the common pipe interrupt vector.\r
-                        *\r
-                        *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.\r
-                        */\r
-                       #define PIPE_INT_STALL                 UPIENX, (1 << RXSTALLE), UPINTX, (1 << RXSTALLI)\r
-\r
                /* Pseudo-Function Macros: */\r
                        #if defined(__DOXYGEN__)\r
                                /** Indicates the number of bytes currently stored in the current pipes's selected bank.\r