Merge in latest trunk.

[pub/USBasp.git] / Bootloaders / DFU / makefile

diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index bcb908b..630b254 100644 (file)
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -51,6 +51,10 @@
 MCU = at90usb1287
 
 
 MCU = at90usb1287
 
 

+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+

 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
 # "Board" inside the application directory.
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
 # "Board" inside the application directory.


@@ -63,8 +67,8 @@ BOARD = USBKEY
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #

-#     This will be an integer division of F_CLOCK below, as it is sourced by
-#     F_CLOCK after it has run through any CPU prescalers. Note that this value
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value

 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.


@@ -72,7 +76,7 @@ F_CPU = 8000000
 
 
 # Input clock frequency.
 
 
 # Input clock frequency.

-#     This will define a symbol, F_CLOCK, in all source code files equal to the
+#     This will define a symbol, F_USB, in all source code files equal to the

 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed


@@ -82,7 +86,7 @@ F_CPU = 8000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_CLOCK = $(F_CPU)
+F_USB = $(F_CPU)

 
 
 # Starting byte address of the bootloader, as a byte address - computed via the formula
 
 
 # Starting byte address of the bootloader, as a byte address - computed via the formula


@@ -91,8 +95,14 @@ F_CLOCK = $(F_CPU)
 # Note that the bootloader size and start address given in AVRStudio is in words and not
 # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
 FLASH_SIZE_KB        = 128
 # Note that the bootloader size and start address given in AVRStudio is in words and not
 # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC.
 FLASH_SIZE_KB        = 128

-BOOT_SECTION_SIZE_KB = 4
+BOOT_SECTION_SIZE_KB = 8
+
+
+# Formulas used to calculate the starting address of the Bootloader section, and the User Application
+# API jump table (for more information on the latter, see the bootloader documentation). These formulas
+# should not need to be altered - modify the FLASH_SIZE_KB and BOOT_SECTION_KB values above instead.

 BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)
 BOOT_START           = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc)

+BOOT_API_TABLESTART  = 0x$(shell echo "obase=16; (($(FLASH_SIZE_KB) * 1024) - 96)" | bc)

 
 
 # Output format. (can be srec, ihex, binary)
 
 
 # Output format. (can be srec, ihex, binary)


@@ -114,17 +124,7 @@ LUFA_PATH = ../..
 
 
 # LUFA library compile-time options and predefined tokens
 
 
 # LUFA library compile-time options and predefined tokens

-LUFA_OPTS  = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_RAM_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_SOF_EVENTS
+LUFA_OPTS  = -D USE_LUFA_CONFIG_HEADER

 
 
 # Create the LUFA source path variables by including the LUFA root makefile
 
 
 # Create the LUFA source path variables by including the LUFA root makefile


@@ -133,6 +133,7 @@ include $(LUFA_PATH)/LUFA/makefile
 
 # List C source files here. (C dependencies are automatically generated.)
 SRC = $(TARGET).c                                                 \
 
 # List C source files here. (C dependencies are automatically generated.)
 SRC = $(TARGET).c                                                 \

+         BootloaderAPI.c                                             \

          Descriptors.c                                               \
          $(LUFA_SRC_USB)                                             \
 
          Descriptors.c                                               \
          $(LUFA_SRC_USB)                                             \
 


@@ -148,7 +149,7 @@ CPPSRC =
 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 #     it will preserve the spelling of the filenames, and gcc itself does
 #     care about how the name is spelled on its command-line.
 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 #     it will preserve the spelling of the filenames, and gcc itself does
 #     care about how the name is spelled on its command-line.

-ASRC =
+ASRC = BootloaderAPITable.S

 
 
 # Optimization level, can be [0, 1, 2, 3, s].
 
 
 # Optimization level, can be [0, 1, 2, 3, s].


@@ -168,7 +169,7 @@ DEBUG = dwarf-2
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.

-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/

 
 
 # Compiler flag to set the C Standard level.
 
 
 # Compiler flag to set the C Standard level.


@@ -181,22 +182,23 @@ CSTANDARD = -std=c99
 
 # Place -D or -U options here for C sources
 CDEFS  = -DF_CPU=$(F_CPU)UL
 
 # Place -D or -U options here for C sources
 CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DF_CLOCK=$(F_CLOCK)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)

 CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 CDEFS += $(LUFA_OPTS)
 
 
 # Place -D or -U options here for ASM sources
 ADEFS  = -DF_CPU=$(F_CPU)
 CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 CDEFS += $(LUFA_OPTS)
 
 
 # Place -D or -U options here for ASM sources
 ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_CLOCK=$(F_CLOCK)UL
+ADEFS += -DF_USB=$(F_USB)UL

 ADEFS += -DBOARD=BOARD_$(BOARD)
 ADEFS += -DBOARD=BOARD_$(BOARD)

-ADEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
+ADEFS += -DBOOT_START_ADDR=$(BOOT_START)

 ADEFS += $(LUFA_OPTS)
 
 ADEFS += $(LUFA_OPTS)
 

+

 # Place -D or -U options here for C++ sources
 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 # Place -D or -U options here for C++ sources
 CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CPPDEFS += -DF_USB=$(F_USB)UL

 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 CPPDEFS += $(LUFA_OPTS)
 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 CPPDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL
 CPPDEFS += $(LUFA_OPTS)


@@ -328,7 +330,7 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)
+LDFLAGS += -Wl,--section-start=.text=$(BOOT_START) -Wl,--section-start=.apitable=$(BOOT_API_TABLESTART) -Wl,--undefined=BootloaderAPI_JumpTable

 LDFLAGS += -Wl,--relax
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += -Wl,--relax
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)


@@ -676,13 +678,24 @@ clean_list :
        $(REMOVEDIR) .dep
 
 doxygen:
        $(REMOVEDIR) .dep
 
 doxygen:

-       @echo Generating Project Documentation...
-       @doxygen Doxygen.conf
+       @echo Generating Project Documentation \($(TARGET)\)...
+       @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+         exit 1; \
+       fi;

        @echo Documentation Generation Complete.
 
 clean_doxygen:
        rm -rf Documentation
 
        @echo Documentation Generation Complete.
 
 clean_doxygen:
        rm -rf Documentation
 

+checksource:
+       @for f in $(SRC) $(CPPSRC) $(ASRC); do \
+               if [ -f $$f ]; then \
+                       echo "Found Source File: $$f" ; \
+               else \
+                       echo "Source File Not Found: $$f" ; \
+               fi; done 
+
+

 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
 


@@ -694,5 +707,5 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 # Listing of phony targets.
 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 build elf hex eep lss sym coff extcoff doxygen clean          \
 # Listing of phony targets.
 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 build elf hex eep lss sym coff extcoff doxygen clean          \

-clean_list clean_doxygen program debug gdb-config
+clean_list clean_doxygen program debug gdb-config checksource