Fix indentation in the AVRISP-MKII AppConfig.h header.

[pub/USBasp.git] / Projects / USBtoSerial / USBtoSerial.txt

diff --git a/Projects/USBtoSerial/USBtoSerial.txt b/Projects/USBtoSerial/USBtoSerial.txt
index e10b359..0620f93 100644 (file)
--- a/Projects/USBtoSerial/USBtoSerial.txt
+++ b/Projects/USBtoSerial/USBtoSerial.txt
@@ -3,19 +3,19 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage USB to Serial Converter Project
  *
- *  \section SSec_Compat Project Compatibility:
+ *  \section Sec_Compat Project Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *  - Series 4 USB AVRs
- *  - Series 2 USB AVRs
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this project.
  *
@@ -28,7 +28,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Communications Device Class (CDC)</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>Abstract Control Model (ACM)</td>
  *   </tr>
@@ -37,12 +37,12 @@
  *    <td>USBIF CDC Class Standard</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
  *
  *  USB to Serial bridge project. This project allows a USB AVR to serve
  *  as a USB to USART bridge between a USB host and a device lacking a
@@ -54,7 +54,7 @@
  *  limitations, some options may not be supported (baud rates with unacceptable
  *  error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,
  *  1.5 stop bits, parity other than none, even or odd).
- *  
+ *
  *  After running this project for the first time on a new computer,
  *  you will need to supply the .INF file located in this project
  *  project's directory as the device's driver when running under
@@ -63,20 +63,16 @@
  *  Operating Systems should automatically use their own inbuilt
  *  CDC-ACM drivers.
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
  *
  *  <table>
  *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
- *   </tr>
- *   <tr>
- *    <td>BUFF_STATICSIZE</td>
- *    <td>RingBuff.h</td>
- *    <td>Defines the maximum number of bytes which can be buffered in each Ring Buffer.</td>
+ *    <td>
+ *     None
+ *    </td>
  *   </tr>
  *  </table>
- */
\ No newline at end of file
+ */
+