+ /** Indicates the number of bytes currently stored in the current endpoint's selected bank.
+ *
+ * \note The return width of this function may differ, depending on the maximum endpoint bank size
+ * of the selected AVR model.
+ *
+ * \ingroup Group_EndpointRW
+ *
+ * \return Total number of bytes in the currently selected Endpoint's FIFO buffer.
+ */
+ static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline uint16_t Endpoint_BytesInEndpoint(void)
+ {
+ #if defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
+ return UEBCX;
+ #elif defined(USB_SERIES_4_AVR)
+ return (((uint16_t)UEBCHX << 8) | UEBCLX);
+ #elif defined(USB_SERIES_2_AVR)
+ return UEBCLX;
+ #endif
+ }
+
+ /** Get the endpoint address of the currently selected endpoint. This is typically used to save
+ * the currently selected endpoint number so that it can be restored after another endpoint has
+ * been manipulated.
+ *
+ * \return Index of the currently selected endpoint.
+ */
+ static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline uint8_t Endpoint_GetCurrentEndpoint(void)
+ {
+ #if !defined(CONTROL_ONLY_DEVICE)
+ return (UENUM & ENDPOINT_EPNUM_MASK);
+ #else
+ return ENDPOINT_CONTROLEP;
+ #endif
+ }
+
+ /** Selects the given endpoint number. If the address from the device descriptors is used, the
+ * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint
+ * number (and discarding the endpoint direction bit).
+ *
+ * Any endpoint operations which do not require the endpoint number to be indicated will operate on
+ * the currently selected endpoint.
+ *
+ * \param[in] EndpointNumber Endpoint number to select.
+ */
+ static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber)
+ {
+ #if !defined(CONTROL_ONLY_DEVICE)
+ UENUM = EndpointNumber;
+ #endif
+ }
+
+ /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's
+ * In and Out pointers to the bank's contents.
+ *
+ * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset.
+ */
+ static inline void Endpoint_ResetFIFO(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_ResetFIFO(const uint8_t EndpointNumber)
+ {
+ UERST = (1 << EndpointNumber);
+ UERST = 0;
+ }
+
+ /** Enables the currently selected endpoint so that data can be sent and received through it to
+ * and from a host.
+ *
+ * \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint().
+ */
+ static inline void Endpoint_EnableEndpoint(void) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_EnableEndpoint(void)
+ {
+ UECONX |= (1 << EPEN);
+ }
+
+ /** Disables the currently selected endpoint so that data cannot be sent and received through it
+ * to and from a host.
+ */
+ static inline void Endpoint_DisableEndpoint(void) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_DisableEndpoint(void)
+ {
+ UECONX &= ~(1 << EPEN);
+ }
+
+ /** Determines if the currently selected endpoint is enabled, but not necessarily configured.
+ *
+ * \return Boolean True if the currently selected endpoint is enabled, false otherwise.
+ */
+ static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_IsEnabled(void)
+ {
+ return ((UECONX & (1 << EPEN)) ? true : false);
+ }
+
+ /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint
+ * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN
+ * direction). This function will return false if an error has occurred in the endpoint, if the endpoint
+ * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN
+ * direction and the endpoint bank is full.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ *
+ * \return Boolean true if the currently selected endpoint may be read from or written to, depending on its direction.
+ */
+ static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_IsReadWriteAllowed(void)
+ {
+ return ((UEINTX & (1 << RWAL)) ? true : false);
+ }
+
+ /** Determines if the currently selected endpoint is configured.
+ *
+ * \return Boolean true if the currently selected endpoint has been configured, false otherwise.
+ */
+ static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_IsConfigured(void)
+ {
+ return ((UESTA0X & (1 << CFGOK)) ? true : false);
+ }
+
+ /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their
+ * interrupt duration has elapsed. Which endpoints have interrupted can be determined by
+ * masking the return value against (1 << {Endpoint Number}).
+ *
+ * \return Mask whose bits indicate which endpoints have interrupted.
+ */
+ static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline uint8_t Endpoint_GetEndpointInterrupts(void)
+ {
+ return UEINT;
+ }
+
+ /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type
+ * endpoints).
+ *
+ * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested.
+ *
+ * \return Boolean true if the specified endpoint has interrupted, false otherwise.
+ */
+ static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber)
+ {
+ return ((UEINT & (1 << EndpointNumber)) ? true : false);
+ }
+
+ /** Determines if the selected IN endpoint is ready for a new packet.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ *
+ * \return Boolean true if the current endpoint is ready for an IN packet, false otherwise.
+ */
+ static inline bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_IsINReady(void)
+ {
+ return ((UEINTX & (1 << TXINI)) ? true : false);
+ }
+
+ /** Determines if the selected OUT endpoint has received new packet.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ *
+ * \return Boolean true if current endpoint is has received an OUT packet, false otherwise.
+ */
+ static inline bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_IsOUTReceived(void)
+ {
+ return ((UEINTX & (1 << RXOUTI)) ? true : false);
+ }
+
+ /** Determines if the current CONTROL type endpoint has received a SETUP packet.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ *
+ * \return Boolean true if the selected endpoint has received a SETUP packet, false otherwise.
+ */
+ static inline bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_IsSETUPReceived(void)
+ {
+ return ((UEINTX & (1 << RXSTPI)) ? true : false);
+ }
+
+ /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the
+ * endpoint for the next packet.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ *
+ * \note This is not applicable for non CONTROL type endpoints.
+ */
+ static inline void Endpoint_ClearSETUP(void) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_ClearSETUP(void)
+ {
+ UEINTX &= ~(1 << RXSTPI);
+ }
+
+ /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the
+ * next packet and switching to the alternative endpoint bank if double banked.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ */
+ static inline void Endpoint_ClearIN(void) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_ClearIN(void)
+ {
+ #if !defined(CONTROL_ONLY_DEVICE)
+ UEINTX &= ~((1 << TXINI) | (1 << FIFOCON));
+ #else
+ UEINTX &= ~(1 << TXINI);
+ #endif
+ }
+
+ /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint
+ * for the next packet and switching to the alternative endpoint bank if double banked.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ */
+ static inline void Endpoint_ClearOUT(void) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_ClearOUT(void)
+ {
+ #if !defined(CONTROL_ONLY_DEVICE)
+ UEINTX &= ~((1 << RXOUTI) | (1 << FIFOCON));
+ #else
+ UEINTX &= ~(1 << RXOUTI);
+ #endif
+ }
+
+ /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the
+ * indicated endpoint and that the current transfer sequence should be aborted. This provides a
+ * way for devices to indicate invalid commands to the host so that the current transfer can be
+ * aborted and the host can begin its own recovery sequence.
+ *
+ * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro
+ * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected
+ * endpoint.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ */
+ static inline void Endpoint_StallTransaction(void) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_StallTransaction(void)
+ {
+ UECONX |= (1 << STALLRQ);
+ }
+
+ /** Clears the STALL condition on the currently selected endpoint.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ */
+ static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_ClearStall(void)
+ {
+ UECONX |= (1 << STALLRQC);
+ }
+
+ /** Determines if the currently selected endpoint is stalled, false otherwise.
+ *
+ * \ingroup Group_EndpointPacketManagement
+ *
+ * \return Boolean true if the currently selected endpoint is stalled, false otherwise.
+ */
+ static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool Endpoint_IsStalled(void)
+ {
+ return ((UECONX & (1 << STALLRQ)) ? true : false);
+ }
+
+ /** Resets the data toggle of the currently selected endpoint. */
+ static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_ResetDataToggle(void)
+ {
+ UECONX |= (1 << RSTDT);
+ }
+
+ /** Determines the currently selected endpoint's direction.
+ *
+ * \return The currently selected endpoint's direction, as a ENDPOINT_DIR_* mask.
+ */
+ static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline uint8_t Endpoint_GetEndpointDirection(void)
+ {
+ return (UECFG0X & ENDPOINT_DIR_IN);
+ }
+
+ /** Sets the direction of the currently selected endpoint.
+ *
+ * \param[in] DirectionMask New endpoint direction, as a ENDPOINT_DIR_* mask.
+ */
+ static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask) ATTR_ALWAYS_INLINE;
+ static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask)
+ {
+ UECFG0X = ((UECFG0X & ~ENDPOINT_DIR_IN) | DirectionMask);
+ }
+
projects / pub / USBasp.git / blobdiff