- /* Pseudo-Function Macros: */
- #if defined(__DOXYGEN__)
- /** Initiate a Host Negotiation Protocol request. This indicates to the other connected device
- * that the device wishes to change device/host roles.
- */
- static inline void USB_OTG_Device_RequestHNP(void);
-
- /** Cancel a Host Negotiation Protocol request. This stops a pending HNP request to the other
- * connected device.
- */
- static inline void USB_OTG_Device_CancelHNPRequest(void);
-
- /** Determines if the device is currently sending a HNP to an attached host.
- *
- * \return Boolean true if currently sending a HNP to the other connected device, false otherwise
- */
- static inline bool USB_OTG_Device_IsSendingHNP(void);
-
- /** Accepts a HNP from a connected device, indicating that both devices should exchange
- * device/host roles.
- */
- static inline void USB_OTG_Host_AcceptHNP(void);
-
- /** Rejects a HNP from a connected device, indicating that both devices should remain in their
- * current device/host roles.
- */
- static inline void USB_OTG_Host_RejectHNP(void);
-
- /** Indicates if the connected device is not currently sending a HNP request.
- *
- * \return Boolean true if a HNP is currently being issued by the connected device, false otherwise.
- */
- static inline bool USB_OTG_Host_IsHNPReceived(void);
-
- /** Initiates a Session Request Protocol request. Most OTG devices turn off VBUS when the USB
- * interface is not in use, to conserve power. Sending a SRP to a USB OTG device running in
- * host mode indicates that VBUS should be applied and a session started.
- *
- * There are two different methods of sending a SRP - either pulses on the VBUS line, or by
- * pulsing the Data + line via the internal pull-up resistor.
- *
- * \param[in] SRPTypeMask Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or \ref USB_OTG_STP_DATA.
- */
- static inline void USB_OTG_Dev_InitiateSRP(uint8_t SRPTypeMask);
- #else
- #define USB_OTG_Device_RequestHNP() MACROS{ OTGCON |= (1 << HNPREQ); }MACROE
-
- #define USB_OTG_Device_CancelHNPRequest() MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE
-
- #define USB_OTG_Device_IsSendingHNP() ((OTGCON & (1 << HNPREQ)) ? true : false)
-
- #define USB_OTG_Host_AcceptHNP() MACROS{ OTGCON |= (1 << HNPREQ); }MACROE
-
- #define USB_OTG_Host_RejectHNP() MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE
-
- #define USB_OTG_Host_IsHNPReceived() ((OTGCON & (1 << HNPREQ)) ? true : false)
-
- #define USB_OTG_Device_InitiateSRP(type) MACROS{ OTGCON = ((OTGCON & ~(1 << SRPSEL)) | ((type) | (1 << SRPREQ))); }MACROE
- #endif
-
+ /* Inline Functions: */
+ /** Initiate a Host Negotiation Protocol request. This indicates to the other connected device
+ * that the device wishes to change device/host roles.
+ */
+ static inline void USB_OTG_Device_RequestHNP(void) ATTR_ALWAYS_INLINE;
+ static inline void USB_OTG_Device_RequestHNP(void)
+ {
+ OTGCON |= (1 << HNPREQ);
+ }
+
+ /** Cancel a Host Negotiation Protocol request. This stops a pending HNP request to the other
+ * connected device.
+ */
+ static inline void USB_OTG_Device_CancelHNPRequest(void) ATTR_ALWAYS_INLINE;
+ static inline void USB_OTG_Device_CancelHNPRequest(void)
+ {
+ OTGCON &= ~(1 << HNPREQ);
+ }
+
+ /** Determines if the device is currently sending a HNP to an attached host.
+ *
+ * \return Boolean true if currently sending a HNP to the other connected device, false otherwise
+ */
+ static inline bool USB_OTG_Device_IsSendingHNP(void) ATTR_ALWAYS_INLINE;
+ static inline bool USB_OTG_Device_IsSendingHNP(void)
+ {
+ return ((OTGCON & (1 << HNPREQ)) ? true : false);
+ }
+
+ /** Initiates a Session Request Protocol request. Most OTG devices turn off VBUS when the USB
+ * interface is not in use, to conserve power. Sending a SRP to a USB OTG device running in
+ * host mode indicates that VBUS should be applied and a session started.
+ *
+ * There are two different methods of sending a SRP - either pulses on the VBUS line, or by
+ * pulsing the Data + line via the internal pull-up resistor.
+ *
+ * \param[in] SRPTypeMask Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or
+ * \ref USB_OTG_STP_DATA.
+ */
+ static inline void USB_OTG_Device_InitiateSRP(const uint8_t SRPTypeMask) ATTR_ALWAYS_INLINE;
+ static inline void USB_OTG_Device_InitiateSRP(const uint8_t SRPTypeMask)
+ {
+ OTGCON = ((OTGCON & ~(1 << SRPSEL)) | (SRPTypeMask | (1 << SRPREQ)));
+ }
+
+ /** Accepts a HNP from a connected device, indicating that both devices should exchange
+ * device/host roles.
+ */
+ static inline void USB_OTG_Host_AcceptHNP(void) ATTR_ALWAYS_INLINE;
+ static inline void USB_OTG_Host_AcceptHNP(void)
+ {
+ OTGCON |= (1 << HNPREQ);
+ }
+
+ /** Rejects a HNP from a connected device, indicating that both devices should remain in their
+ * current device/host roles.
+ */
+ static inline void USB_OTG_Host_RejectHNP(void) ATTR_ALWAYS_INLINE;
+ static inline void USB_OTG_Host_RejectHNP(void)
+ {
+ OTGCON &= ~(1 << HNPREQ);
+ }
+
+ /** Indicates if the connected device is not currently sending a HNP request.
+ *
+ * \return Boolean true if a HNP is currently being issued by the connected device, false otherwise.
+ */
+ static inline bool USB_OTG_Host_IsHNPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
+ static inline bool USB_OTG_Host_IsHNPReceived(void)
+ {
+ return ((OTGCON & (1 << HNPREQ)) ? true : false);
+ }
+
projects / pub / USBasp.git / blobdiff