AppConfigHeaders: Switch class driver Host mode demos to use LUFAConfig.h configurati...

[pub/USBasp.git] / Demos / Device / LowLevel / MassStorage / MassStorage.txt

diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt
index 3489ca0..8d04882 100644 (file)
--- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt
+++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt
@@ -3,19 +3,19 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */

- 
+

 /** \mainpage Mass Storage Device Demo
  *
 /** \mainpage Mass Storage Device Demo
  *

- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:

  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *

- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *  - Series 4 USB AVRs
- *  - Series 2 USB AVRs
+ *  - Series 7 USB AVRs (AT90USBxxx7)
+ *  - Series 6 USB AVRs (AT90USBxxx6)
+ *  - Series 4 USB AVRs (ATMEGAxxU4)
+ *  - Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)

  *
  *

- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:

  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *


@@ -28,7 +28,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Mass Storage Device</td>
  *   </tr>
  *    <td><b>USB Class:</b></td>
  *    <td>Mass Storage Device</td>
  *   </tr>

- *   <tr> 
+ *   <tr>

  *    <td><b>USB Subclass:</b></td>
  *    <td>Bulk-Only Transport</td>
  *   </tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>Bulk-Only Transport</td>
  *   </tr>


@@ -45,26 +45,25 @@
  *   </tr>
  *  </table>
  *
  *   </tr>
  *  </table>
  *

- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
+ *
+ *  Mass Storage device demonstration application. This gives a simple
+ *  reference application for implementing a USB Mass Storage device using
+ *  the basic USB UFI drivers in all modern OSes (i.e. no special drivers
+ *  required).

  *
  *

- *  Dual LUN Mass Storage demonstration application. This gives a simple
- *  reference application for implementing a multiple LUN USB Mass Storage
- *  device using the basic USB UFI drivers in all modern OSes (i.e. no
- *  special drivers required).
- *  

  *  On start-up the system will automatically enumerate and function as an
  *  On start-up the system will automatically enumerate and function as an

- *  external mass storage device with two LUNs (separate disks) which may
- *  be formatted and used in the same manner as commercial USB Mass Storage
- *  devices.
- *     
- *  You will need to format the mass storage drives upon first run of this
+ *  external mass storage device which may be formatted and used in the same
+ *  manner as commercial USB Mass Storage devices.
+ *
+ *  You will need to format the mass storage drive upon first run of this

  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.
  *  demonstration - as the device acts only as a data block transport between
  *  the host and the storage media, it does not matter what file system is used,
  *  as the data interpretation is performed by the host and not the USB device.

- *  
- *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
- *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
- *  255), with each LUN being allocated an equal portion of the available
+ *
+ *  This demo is not restricted to only a single LUN (logical disk); by changing
+ *  the TOTAL_LUNS value in DataflashManager.h, any number of LUNs can be used
+ *  (from 1 to 255), with each LUN being allocated an equal portion of the available

  *  Dataflash memory.
  *
  *  The USB control endpoint is managed entirely by the library using endpoint
  *  Dataflash memory.
  *
  *  The USB control endpoint is managed entirely by the library using endpoint


@@ -72,7 +71,7 @@
  *  the host to reset the Mass Storage device state during long transfers without
  *  the need for complicated polling logic.
  *
  *  the host to reset the Mass Storage device state during long transfers without
  *  the need for complicated polling logic.
  *

- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options

  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *


@@ -90,3 +89,4 @@
  *   </tr>
  *  </table>
  */
  *   </tr>
  *  </table>
  */

+