Make XPLAINBridge serial bridge much more reliable for the reception of characters...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / V2ProtocolParams.c

diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
index b8c5930..bc3ed18 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
+++ b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
@@ -44,11 +44,11 @@ static ParameterItem_t ParameterTable[] =
        {
                { .ParamID          = PARAM_BUILD_NUMBER_LOW,
                  .ParamPrivileges  = PARAM_PRIV_READ,
        {
                { .ParamID          = PARAM_BUILD_NUMBER_LOW,
                  .ParamPrivileges  = PARAM_PRIV_READ,

-                 .ParamValue       = (LUFA_VERSION_INTEGER >> 8)        },
+                 .ParamValue       = 0                                  },

 
                { .ParamID          = PARAM_BUILD_NUMBER_HIGH,
                  .ParamPrivileges  = PARAM_PRIV_READ,
 
                { .ParamID          = PARAM_BUILD_NUMBER_HIGH,
                  .ParamPrivileges  = PARAM_PRIV_READ,

-                 .ParamValue       = (LUFA_VERSION_INTEGER & 0xFF),     },
+                 .ParamValue       = 0                                  },

 
                { .ParamID          = PARAM_HW_VER,
                  .ParamPrivileges  = PARAM_PRIV_READ,
 
                { .ParamID          = PARAM_HW_VER,
                  .ParamPrivileges  = PARAM_PRIV_READ,


@@ -87,8 +87,7 @@ static ParameterItem_t ParameterTable[] =
 /** Loads saved non-volatile parameter values from the EEPROM into the parameter table, as needed. */
 void V2Params_LoadNonVolatileParamValues(void)
 {
 /** Loads saved non-volatile parameter values from the EEPROM into the parameter table, as needed. */
 void V2Params_LoadNonVolatileParamValues(void)
 {

-       /* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM -
-        *   NB: Cannot call V2Protocol_SetParameterValue() here, as that will cause another EEPROM write! */
+       /* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM */

        V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Rest_Polarity);
 }
 
        V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Rest_Polarity);
 }
 


@@ -99,7 +98,7 @@ void V2Params_UpdateParamValues(void)
 {
        #if (defined(ADC) && !defined(NO_VTARGET_DETECT))
        /* Update VTARGET parameter with the latest ADC conversion of VTARGET on supported AVR models */
 {
        #if (defined(ADC) && !defined(NO_VTARGET_DETECT))
        /* Update VTARGET parameter with the latest ADC conversion of VTARGET on supported AVR models */

-       V2Params_GetParamFromTable(PARAM_VTARGET)->ParamValue = ((5 * 10 * ADC_GetResult()) / 1024);
+       V2Params_GetParamFromTable(PARAM_VTARGET)->ParamValue = (((uint16_t)(VTARGET_REF_VOLTS * 10 * VTARGET_SCALE_FACTOR) * ADC_GetResult()) / 1024);

        #endif
 }
 
        #endif
 }
 


@@ -123,6 +122,10 @@ uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID)
 
 /** Retrieves the current value for a given parameter in the parameter table.
  *
 
 /** Retrieves the current value for a given parameter in the parameter table.
  *

+ *  \note This function does not first check for read privileges - if the value is being sent to the host via a
+ *        GET PARAM command, \ref V2Params_GetParameterPrivileges() should be called first to ensure that the
+ *        parameter is host-readable.
+ *

  *  \param[in] ParamID  Parameter ID whose value is to be retrieved from the table
  *
  *  \return Current value of the parameter in the table, or 0 if not found
  *  \param[in] ParamID  Parameter ID whose value is to be retrieved from the table
  *
  *  \return Current value of the parameter in the table, or 0 if not found


@@ -139,6 +142,10 @@ uint8_t V2Params_GetParameterValue(const uint8_t ParamID)
 
 /** Sets the value for a given parameter in the parameter table.
  *
 
 /** Sets the value for a given parameter in the parameter table.
  *

+ *  \note This function does not first check for write privileges - if the value is being sourced from the host
+ *        via a SET PARAM command, \ref V2Params_GetParameterPrivileges() should be called first to ensure that the
+ *        parameter is host-writable.
+ *

  *  \param[in] ParamID  Parameter ID whose value is to be set in the table
  *  \param[in] Value    New value to set the parameter to
  *
  *  \param[in] ParamID  Parameter ID whose value is to be set in the table
  *  \param[in] Value    New value to set the parameter to
  *


@@ -155,7 +162,7 @@ void V2Params_SetParameterValue(const uint8_t ParamID, const uint8_t Value)
 
        /* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
        if (ParamID == PARAM_RESET_POLARITY)
 
        /* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
        if (ParamID == PARAM_RESET_POLARITY)

-         eeprom_write_byte(&EEPROM_Rest_Polarity, Value);  
+         eeprom_update_byte(&EEPROM_Rest_Polarity, Value);  

 }
 
 /** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given
 }
 
 /** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given