Make XPLAINBridge serial bridge much more reliable for the reception of characters...

[pub/USBasp.git] / LUFA / Drivers / USB / LowLevel / OTG.h

diff --git a/LUFA/Drivers/USB/LowLevel/OTG.h b/LUFA/Drivers/USB/LowLevel/OTG.h
index 944fd72..0218998 100644 (file)
--- a/LUFA/Drivers/USB/LowLevel/OTG.h
+++ b/LUFA/Drivers/USB/LowLevel/OTG.h
@@ -66,13 +66,13 @@
                /* Macros: */
                        /** Mask for the VBUS pulsing method of SRP, supported by some OTG devices.
                         *
-                        *  \see USB_OTG_DEV_Initiate_SRP()
+                        *  \see \ref USB_OTG_Device_InitiateSRP().
                         */                      
                        #define USB_OTG_SRP_VBUS                   (1 << SRPSEL)
 
                        /** Mask for the Data + pulsing method of SRP, supported by some OTG devices.
                         *
-                        *  \see USB_OTG_DEV_Initiate_SRP()
+                        *  \see \ref USB_OTG_Device_InitiateSRP().
                         */                      
                        #define USB_OTG_STP_DATA                   0
 
@@ -94,6 +94,18 @@
                                 */
                                static inline bool USB_OTG_Device_IsSendingHNP(void);
                                
+                               /** Initiates a Session Request Protocol request. Most OTG devices turn off VBUS when the USB
+                                *  interface is not in use, to conserve power. Sending a SRP to a USB OTG device running in
+                                *  host mode indicates that VBUS should be applied and a session started.
+                                *
+                                *  There are two different methods of sending a SRP - either pulses on the VBUS line, or by
+                                *  pulsing the Data + line via the internal pull-up resistor.
+                                *
+                                *  \param[in] SRPTypeMask  Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or
+                                *                          \ref USB_OTG_STP_DATA.
+                                */
+                               static inline void USB_OTG_Device_InitiateSRP(uint8_t SRPTypeMask);
+
                                /** Accepts a HNP from a connected device, indicating that both devices should exchange
                                 *  device/host roles.
                                 */
@@ -109,17 +121,6 @@
                                 *  \return Boolean true if a HNP is currently being issued by the connected device, false otherwise.
                                 */
                                static inline bool USB_OTG_Host_IsHNPReceived(void);
-                               
-                               /** Initiates a Session Request Protocol request. Most OTG devices turn off VBUS when the USB
-                                *  interface is not in use, to conserve power. Sending a SRP to a USB OTG device running in
-                                *  host mode indicates that VBUS should be applied and a session started.
-                                *
-                                *  There are two different methods of sending a SRP - either pulses on the VBUS line, or by
-                                *  pulsing the Data + line via the internal pull-up resistor.
-                                *
-                                *  \param[in] SRPTypeMask  Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or \ref USB_OTG_STP_DATA.
-                                */
-                               static inline void USB_OTG_Dev_InitiateSRP(uint8_t SRPTypeMask);
                        #else
                                #define USB_OTG_Device_RequestHNP()         MACROS{ OTGCON |=  (1 << HNPREQ); }MACROE
 
@@ -127,13 +128,13 @@
 
                                #define USB_OTG_Device_IsSendingHNP()             ((OTGCON &   (1 << HNPREQ)) ? true : false)
                                
+                               #define USB_OTG_Device_InitiateSRP(type)    MACROS{ OTGCON = ((OTGCON & ~(1 << SRPSEL)) | ((type) | (1 << SRPREQ))); }MACROE
+
                                #define USB_OTG_Host_AcceptHNP()            MACROS{ OTGCON |=  (1 << HNPREQ); }MACROE
 
                                #define USB_OTG_Host_RejectHNP()            MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE
                                
-                               #define USB_OTG_Host_IsHNPReceived()              ((OTGCON &   (1 << HNPREQ)) ? true : false)
-                               
-                               #define USB_OTG_Device_InitiateSRP(type)    MACROS{ OTGCON = ((OTGCON & ~(1 << SRPSEL)) | ((type) | (1 << SRPREQ))); }MACROE
+                               #define USB_OTG_Host_IsHNPReceived()              ((OTGCON &   (1 << HNPREQ)) ? true : false)                           
                        #endif
        
 #endif