/*
LUFA Library
Copyright (C) Dean Camera, 2010.
-
+
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
* including any headers in the USB/LowLevel/ or USB/HighLevel/ subdirectories.
*/
-/** @defgroup Group_USB USB - LUFA/Drivers/USB/USB.h
+/** @defgroup Group_USB USB Core - LUFA/Drivers/USB/USB.h
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/LowLevel/DevChapter9.c
- * - LUFA/Drivers/USB/LowLevel/Endpoint.c
- * - LUFA/Drivers/USB/LowLevel/Host.c
- * - LUFA/Drivers/USB/LowLevel/HostChapter9.c
- * - LUFA/Drivers/USB/LowLevel/LowLevel.c
- * - LUFA/Drivers/USB/LowLevel/Pipe.c
- * - LUFA/Drivers/USB/LowLevel/USBInterrupt.c
- * - LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c
- * - LUFA/Drivers/USB/HighLevel/Events.c
- * - LUFA/Drivers/USB/HighLevel/USBTask.c
+ * - LUFA/Drivers/USB/LowLevel/Device.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/LowLevel/Endpoint.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/LowLevel/Host.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/LowLevel/Pipe.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/LowLevel/USBController.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/LowLevel/USBInterrupt.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/HighLevel/DeviceStandardReq.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/HighLevel/Events.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/HighLevel/EndpointStream.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/HighLevel/HostStandardReq.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/HighLevel/PipeStream.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
+ * - LUFA/Drivers/USB/HighLevel/USBTask.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
*
* \section Module Description
* Driver and framework for the USB controller hardware on the USB series of AVR microcontrollers. This module
* of USB management functions found \ref Group_USBManagement.
*/
-/** \ingroup Group_USB
- * @defgroup Group_USBClassDrivers USB Class Drivers
+/** @defgroup Group_USBClassDrivers USB Class Drivers
*
* Drivers for both host and device mode of the standard USB classes, for rapid application development.
* Class drivers give a framework which sits on top of the low level library API, allowing for standard
*
* <table>
* <tr>
- * <th width="100px">USB Class</th>
- * <th width="90px">Device Mode</th>
- * <th width="90px">Host Mode</th>
+ * <th width="100px">USB Class</th>
+ * <th width="90px">Device Mode</th>
+ * <th width="90px">Host Mode</th>
* </tr>
* <tr>
* <td>Audio</td>
*
* \subsection SSec_ClassDriverDevice Device Mode Class Drivers
* Implementing a Device Mode Class Driver in a user application requires a number of steps to be followed. Firstly,
- * the module configuration and state structure must be added to the project source. These structures are named in a
+ * the module configuration and state structure must be added to the project source. These structures are named in a
* similar manner between classes, that of <i>USB_ClassInfo_<b>{Class Name}</b>_Device_t</i>, and are used to hold the
- * complete state and configuration for each class instance. Multiple class instances is where the power of the class
- * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's ClassInfo
+ * complete state and configuration for each class instance. Multiple class instances is where the power of the class
+ * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's ClassInfo
* structure.
*
* Inside the ClassInfo structure lies two sections, a <i>Config</i> section, and a <i>State</i> section. The Config
* .Config =
* {
* .StreamingInterfaceNumber = 1,
- *
+ *
* .DataINEndpointNumber = 1,
* .DataINEndpointSize = 256,
* },
*
* To initialize the Class driver instance, the driver's <i><b>{Class Name}</b>_Device_ConfigureEndpoints()</i> function
* should be called in response to the \ref EVENT_USB_Device_ConfigurationChanged() event. This function will return a
- * boolean value if the driver sucessfully initialized the instance. Like all the class driver functions, this function
- * takes in the address of the specific instance you wish to initialize - in this manner, multiple seperate instances of
+ * boolean value if the driver successfully initialized the instance. Like all the class driver functions, this function
+ * takes in the address of the specific instance you wish to initialize - in this manner, multiple separate instances of
* the same class type can be initialized like thus:
*
* \code
* void EVENT_USB_Device_ConfigurationChanged(void)
* {
* LEDs_SetAllLEDs(LEDMASK_USB_READY);
- *
+ *
* if (!(Audio_Device_ConfigureEndpoints(&My_Audio_Interface)))
* LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
* }
* \endcode
- *
+ *
* Once initialized, it is important to maintain the class driver's state by repeatedly calling the Class Driver's
* <i><b>{Class Name}</b>_Device_USBTask()</i> function in the main program loop. The exact implementation of this
* function varies between class drivers, and can be used for any internal class driver purpose to maintain each
* instance. Again, this function uses the address of the instance to operate on, and thus needs to be called for each
- * seperate instance, just like the main USB maintenance routine \ref USB_USBTask():
+ * separate instance, just like the main USB maintenance routine \ref USB_USBTask():
*
* \code
* int main(void)
* {
* SetupHardware();
- *
+ *
* LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- *
+ *
* for (;;)
* {
* Create_And_Process_Samples();
- *
+ *
* Audio_Device_USBTask(&My_Audio_Interface);
* USB_USBTask();
* }
*
* \subsection SSec_ClassDriverHost Host Mode Class Drivers
* Implementing a Host Mode Class Driver in a user application requires a number of steps to be followed. Firstly,
- * the module configuration and state structure must be added to the project source. These structures are named in a
+ * the module configuration and state structure must be added to the project source. These structures are named in a
* similar manner between classes, that of <i>USB_ClassInfo_<b>{Class Name}</b>_Host_t</i>, and are used to hold the
- * complete state and configuration for each class instance. Multiple class instances is where the power of the class
- * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's ClassInfo
+ * complete state and configuration for each class instance. Multiple class instances is where the power of the class
+ * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's ClassInfo
* structure.
*
* Inside the ClassInfo structure lies two sections, a <i>Config</i> section, and a <i>State</i> section. The Config
* {
* .DataINPipeNumber = 1,
* .DataINPipeDoubleBank = false,
- *
+ *
* .DataOUTPipeNumber = 2,
* .DataOUTPipeDoubleBank = false,
* },
* To initialize the Class driver instance, the driver's <i><b>{Class Name}</b>_Host_ConfigurePipes()</i> function
* should be called in response to the host state machine entering the \ref HOST_STATE_Addressed state. This function
* will return an error code from the class driver's <i><b>{Class Name}</b>_EnumerationFailure_ErrorCodes_t</i> enum
- * to indicate if the driver sucessfully initialized the instance and bound it to an interface in the attached device.
- * Like all the class driver functions, this function takes in the address of the specific instance you wish to initialize
- * - in this manner, multiple seperate instances of the same class type can be initialized. A fragment of a Class Driver
+ * to indicate if the driver successfully initialized the instance and bound it to an interface in the attached device.
+ * Like all the class driver functions, this function takes in the address of the specific instance you wish to initialize -
+ * in this manner, multiple separate instances of the same class type can be initialized. A fragment of a Class Driver
* based Host mode application may look like the following:
*
* \code
* {
* case HOST_STATE_Addressed:
* LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
- *
+ *
* uint16_t ConfigDescriptorSize;
* uint8_t ConfigDescriptorData[512];
*
* <i><b>{Class Name}</b>_Host_USBTask()</i> function in the main program loop. The exact implementation of this
* function varies between class drivers, and can be used for any internal class driver purpose to maintain each
* instance. Again, this function uses the address of the instance to operate on, and thus needs to be called for each
- * seperate instance, just like the main USB maintenance routine \ref USB_USBTask():
+ * separate instance, just like the main USB maintenance routine \ref USB_USBTask():
*
* \code
* int main(void)
* {
* SetupHardware();
- *
+ *
* LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- *
+ *
* for (;;)
* {
* switch (USB_HostState)
* {
* // Host state machine handling here
- * }
- *
+ * }
+ *
* MIDI_Host_USBTask(&My_Audio_Interface);
* USB_USBTask();
* }
* read and write routines. See each driver's individual documentation for more information on the
* class-specific functions.
*/
-
+
#ifndef __USB_H__
#define __USB_H__
/* Includes: */
#include "HighLevel/USBMode.h"
- /* Preprocessor Checks: */
+ /* Preprocessor Checks: */
#if (!defined(USB_SERIES_2_AVR) && !defined(USB_SERIES_4_AVR) && \
!defined(USB_SERIES_6_AVR) && !defined(USB_SERIES_7_AVR))
#error The currently selected AVR model is not supported under the USB component of the LUFA library.
#endif
-
+
/* Includes: */
#include "HighLevel/USBTask.h"
#include "HighLevel/Events.h"
#include "HighLevel/StdDescriptors.h"
#include "HighLevel/ConfigDescriptor.h"
- #include "LowLevel/LowLevel.h"
+ #include "LowLevel/USBController.h"
#include "LowLevel/USBInterrupt.h"
-
+
#if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)
#include "LowLevel/Host.h"
- #include "LowLevel/HostChapter9.h"
#include "LowLevel/Pipe.h"
+ #include "HighLevel/HostStandardReq.h"
+ #include "HighLevel/PipeStream.h"
#endif
-
+
#if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)
#include "LowLevel/Device.h"
- #include "LowLevel/DevChapter9.h"
#include "LowLevel/Endpoint.h"
+ #include "HighLevel/DeviceStandardReq.h"
+ #include "HighLevel/EndpointStream.h"
#endif
-
+
#if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
#include "LowLevel/OTG.h"
#endif
-
+
#endif
projects / pub / USBasp.git / blobdiff