Fixed ISR definition conflict in the XPLAIN bridge between the software UART and...

[pub/USBasp.git] / LUFA / Drivers / Board / Temperature.h

diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index 4c5d642..40d8e98 100644 (file)
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -31,7 +31,7 @@
 /** \file
  *  \brief Master include file for the board temperature sensor driver.
  *
- *  Master include file for the board temperature sensor driver, for the USB boards which contain a temperature sensor.
+ *  Master include file for the board temperature sensor driver, for the USB boards which contain a temperature sensor. 
  */
 
 /** \ingroup Group_BoardDrivers
@@ -39,7 +39,7 @@
  *
  *  \section Sec_Dependencies Module Source Dependencies
  *  The following files must be built with any user project that uses this module:
- *    - LUFA/Drivers/Board/Temperature.c
+ *    - LUFA/Drivers/Board/Temperature.c <i>(Makefile source module name: LUFA_SRC_TEMPERATURE)</i>
  *
  *  \section Module Description
  *  Temperature sensor driver. This provides an easy to use interface for the hardware temperature sensor located
@@ -86,24 +86,24 @@
                        /** Maximum returnable temperature from the \ref Temperature_GetTemperature() function. */
                        #define TEMP_MAX_TEMP          ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET)
                
-               /* Pseudo-Function Macros: */
-                       #if defined(__DOXYGEN__)
-                               /** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.
-                                *  This must be called before any other temperature sensor routines.
-                                *
-                                *  \note The ADC itself (not the ADC channel) must be configured separately before calling the
-                                *        temperature sensor functions.
-                                */
-                               static inline void Temperature_Init(void);
-                       #else
-                               #define Temperature_Init() ADC_SetupChannel(TEMP_ADC_CHANNEL);
-                       #endif
+               /* Inline Functions: */
+                       /** Initialises the temperature sensor driver, including setting up the appropriate ADC channel.
+                        *  This must be called before any other temperature sensor routines.
+                        *
+                        *  \pre The ADC itself (not the ADC channel) must be configured separately before calling the
+                        *       temperature sensor functions.
+                        */
+                       static inline void Temperature_Init(void) ATTR_ALWAYS_INLINE;
+                       static inline void Temperature_Init(void)
+                       {
+                               ADC_SetupChannel(TEMP_ADC_CHANNEL);
+                       }
 
                /* Function Prototypes: */
                        /** Performs a complete ADC on the temperature sensor channel, and converts the result into a
                         *  valid temperature between \ref TEMP_MIN_TEMP and \ref TEMP_MAX_TEMP in degrees Celsius.
                         *
-                        *  \return Signed temperature in degrees Celsius
+                        *  \return Signed temperature value in degrees Celsius.
                         */
                        int8_t Temperature_GetTemperature(void) ATTR_WARN_UNUSED_RESULT;