Move out class driver modules into seperate AS6 integration modules, add ability...

[pub/USBasp.git] / Demos / Device / LowLevel / KeyboardMouse / KeyboardMouse.txt

diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
index 6f24efe..20c89cc 100644 (file)
--- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
+++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
@@ -3,19 +3,22 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Dual HID Keyboard and Mouse Device Demo
  *
- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *  - Series 4 USB AVRs
- *  - Series 2 USB AVRs
+ *  \li Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 6 USB AVRs (AT90USBxxx6)
+ *  \li Series 4 USB AVRs (ATMEGAxxU4)
+ *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
+ *  \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
+ *  \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
  *
- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
@@ -28,7 +31,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Human Interface Device (HID)</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>N/A</td>
  *   </tr>
@@ -38,13 +41,13 @@
  *        USBIF HID Usage Tables</td>
  *   </tr>
  *   <tr>
- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>
  *    <td>Low Speed Mode \n
  *        Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:
  *
  *  Keyboard/Mouse demonstration application. This gives a simple reference
  *  application for implementing a composite device containing both USB Keyboard
@@ -52,18 +55,18 @@
  *  (i.e. no special drivers required). This example uses two separate HID
  *  interfaces for each function. It is boot protocol compatible, and thus works under
  *  compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2).
- *  
+ *
  *  On start-up the system will automatically enumerate and function
  *  as a keyboard when the USB connection to a host is present and the HWB is not
  *  pressed. When enabled, manipulate the joystick to send the letters
  *  a, b, c, d and e. See the USB HID documentation for more information
  *  on sending keyboard event and key presses.
- *  
+ *
  *  When the HWB is pressed, the mouse mode is enabled. When enabled, move the
  *  joystick to move the pointer, and push the joystick inwards to simulate a
  *  left-button click.
  *
- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
@@ -75,3 +78,4 @@
  *   </tr>
  *  </table>
  */
+