Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached...

[pub/USBasp.git] / Demos / Device / ClassDriver / AudioOutput / AudioOutput.txt

diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
index 9170478..090f8be 100644 (file)
--- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
+++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt
@@ -3,18 +3,18 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */

- 
+

 /** \mainpage Audio Output Device Demo
  *
 /** \mainpage Audio Output Device Demo
  *

- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:

  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *

- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *  - Series 4 USB AVRs
+ *  - Series 7 USB AVRs (AT90USBxxx7)
+ *  - Series 6 USB AVRs (AT90USBxxx6)
+ *  - Series 4 USB AVRs (ATMEGAxxU4)

  *
  *

- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:

  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *


@@ -27,15 +27,15 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Audio Class</td>
  *   </tr>
  *    <td><b>USB Class:</b></td>
  *    <td>Audio Class</td>
  *   </tr>

- *   <tr> 
+ *   <tr>

  *    <td><b>USB Subclass:</b></td>
  *    <td>Standard Audio Device</td>
  *   </tr>
  *   <tr>
  *    <td><b>Relevant Standards:</b></td>
  *    <td><b>USB Subclass:</b></td>
  *    <td>Standard Audio Device</td>
  *   </tr>
  *   <tr>
  *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF Audio Class Specification \n
- *        USBIF Audio Class Terminal Types Specification \n
- *        USBIF Audio Data Formats Specification</td>
+ *    <td>USBIF Audio 1.0 Class Specification \n
+ *        USBIF Audio 1.0 Class Terminal Types Specification \n
+ *        USBIF Audio 1.0 Data Formats Specification</td>

  *   </tr>
  *   <tr>
  *    <td><b>Usable Speeds:</b></td>
  *   </tr>
  *   <tr>
  *    <td><b>Usable Speeds:</b></td>


@@ -43,13 +43,13 @@
  *   </tr>
  *  </table>
  *
  *   </tr>
  *  </table>
  *

- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:

  *
  *  Audio demonstration application. This gives a simple reference
  *  application for implementing a USB Audio Output device using the
  *
  *  Audio demonstration application. This gives a simple reference
  *  application for implementing a USB Audio Output device using the

- *  basic USB Audio drivers in all modern OSes (i.e. no special drivers
+ *  basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers

  *  required).
  *  required).

- *  
+ *

  *  On start-up the system will automatically enumerate and function
  *  as a USB speaker. Outgoing audio will output in 8-bit PWM onto
  *  the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on
  *  On start-up the system will automatically enumerate and function
  *  as a USB speaker. Outgoing audio will output in 8-bit PWM onto
  *  the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on


@@ -57,11 +57,11 @@
  *  mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on
  *  the board LEDs in all modes. Decouple audio outputs with a capacitor and
  *  attach to a speaker to hear the audio.
  *  mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on
  *  the board LEDs in all modes. Decouple audio outputs with a capacitor and
  *  attach to a speaker to hear the audio.

- *  
+ *

  *  Under Windows, if a driver request dialogue pops up, select the option
  *  to automatically install the appropriate drivers.
  *
  *  Under Windows, if a driver request dialogue pops up, select the option
  *  to automatically install the appropriate drivers.
  *

- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options

  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *


@@ -73,24 +73,20 @@
  *   </tr>
  *   <tr>
  *    <td>AUDIO_OUT_STEREO</td>
  *   </tr>
  *   <tr>
  *    <td>AUDIO_OUT_STEREO</td>

- *    <td>Makefile CDEFS</td>
+ *    <td>Makefile LUFA_OPTS</td>

  *    <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
  *   </tr>
  *   <tr>
  *    <td>AUDIO_OUT_MONO</td>
  *    <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
  *   </tr>
  *   <tr>
  *    <td>AUDIO_OUT_MONO</td>

- *    <td>Makefile CDEFS</td>
+ *    <td>Makefile LUFA_OPTS</td>

  *    <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
  *   </tr>
  *   <tr>
  *    <td>AUDIO_OUT_PORTC</td>
  *    <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
  *   </tr>
  *   <tr>
  *    <td>AUDIO_OUT_PORTC</td>

- *    <td>Makefile CDEFS</td>
+ *    <td>Makefile LUFA_OPTS</td>

  *    <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
  *        external DAC.</td>
  *   </tr>
  *    <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
  *        external DAC.</td>
  *   </tr>

- *   <tr>
- *    <td>AUDIO_SAMPLE_FREQUENCY</td>
- *    <td>Descriptors.h</td>
- *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>
- *   </tr>

  *  </table>
  */
  *  </table>
  */

+