Make TPI writes add a dummy high byte if the data isn't word-aligned.

[pub/USBasp.git] / LUFA / ManPages / ChangeLog.txt

diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 6a2126f..63ffaec 100644 (file)
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -9,7 +9,7 @@
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX\r
   *\r
   *  <b>New:</b>\r
   *  \section Sec_ChangeLogXXXXXX Version XXXXXX\r
   *\r
   *  <b>New:</b>\r

-  *  - Added TPI programming support for 6-pin ATTINY to the AVRISP programmer project\r
+  *  - Added TPI programming support for 6-pin ATTINY devices to the AVRISP programmer project (thanks to Tom Light)\r

   *  - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected\r
   *    to a target\r
   *  - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to\r
   *  - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected\r
   *    to a target\r
   *  - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to\r


@@ -17,7 +17,10 @@
   *  - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to\r
   *    sent or received in packed form in a single USB packet\r
   *  - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events\r
   *  - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to\r
   *    sent or received in packed form in a single USB packet\r
   *  - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events\r

-  *  - Added master mode hardware TWI driver\r
+  *  - Added master mode hardware TWI driver for easy TWI peripheral control\r
+  *  - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks\r
+  *    as on some models, the channel number is not identical to its single-ended ADC MUX mask\r
+  *  - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library\r

   *\r
   *  <b>Changed:</b>\r
   *  - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors\r
   *\r
   *  <b>Changed:</b>\r
   *  - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors\r


@@ -29,6 +32,7 @@
   *  - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space\r
   *  - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's\r
   *    TDI pin to determine which mode to use\r
   *  - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space\r
   *  - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's\r
   *    TDI pin to determine which mode to use\r

+  *  - Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter\r

   *\r
   *  <b>Fixed:</b>\r
   *  - Fixed AVRISP project not able to enter programming mode when ISP protocol is used\r
   *\r
   *  <b>Fixed:</b>\r
   *  - Fixed AVRISP project not able to enter programming mode when ISP protocol is used\r


@@ -41,6 +45,12 @@
   *  - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers\r
   *  - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders\r
   *  - Fixed Benito project not resetting the target AVR automatically when programming has completed\r
   *  - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers\r
   *  - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders\r
   *  - Fixed Benito project not resetting the target AVR automatically when programming has completed\r

+  *  - Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming\r
+  *    ranges are specified (thanks to Thomas Bleeker)\r
+  *  - Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two seperate pipes, not one half-duplex pipe\r
+  *  - Fixed Pipe_IsEndpointBound() not taking the endpoint's direction into account\r
+  *  - Fixed EEPROM and FLASH ISP programming in the AVRISP project\r
+  *  - Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen)\r

   *\r
   *  \section Sec_ChangeLog091223 Version 091223\r
   *\r
   *\r
   *  \section Sec_ChangeLog091223 Version 091223\r
   *\r


@@ -105,6 +115,7 @@
   *    used (thanks to Daniel Levy)\r
   *  - Fixed TeensyHID bootloader not enumerating to the host correctly\r
   *  - Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott)\r
   *    used (thanks to Daniel Levy)\r
   *  - Fixed TeensyHID bootloader not enumerating to the host correctly\r
   *  - Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott)\r

+  *  - Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell)\r

   *\r
   *  \section Sec_ChangeLog091122 Version 091122\r
   *\r
   *\r
   *  \section Sec_ChangeLog091122 Version 091122\r
   *\r