MCU = at90usb1287
-# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = USBKEY
+BOARD = USER
# Processor frequency.
F_CPU = 16000000
+# Input clock frequency.
+# This will define a symbol, F_CLOCK, in all source code files equal to the
+# input clock frequency (before any prescaling is performed). This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_CLOCK = $(F_CPU)
+
+
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
OBJDIR = .
+# Path to the LUFA library
+LUFA_PATH = ../..
+
+
+# LUFA library compile-time options
+LUFA_OPTS = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
+LUFA_OPTS += -D USB_DEVICE_ONLY
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
+LUFA_OPTS += -D TOTAL_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+
# List C source files here. (C dependencies are automatically generated.)
-SRC = $(TARGET).c \
- Descriptors.c \
- CircularBitBuffer.c \
- ../../LUFA/Scheduler/Scheduler.c \
- ../../LUFA/Drivers/USB/LowLevel/LowLevel.c \
- ../../LUFA/Drivers/USB/LowLevel/Endpoint.c \
- ../../LUFA/Drivers/USB/LowLevel/DevChapter9.c \
- ../../LUFA/Drivers/USB/HighLevel/USBTask.c \
- ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
- ../../LUFA/Drivers/USB/HighLevel/Events.c \
- ../../LUFA/Drivers/USB/HighLevel/StdDescriptors.c \
-
+SRC = $(TARGET).c \
+ Descriptors.c \
+ Lib/CircularBitBuffer.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c \
+ $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HID.c \
+
+
# List C++ source files here. (C dependencies are automatically generated.)
CPPSRC =
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = ../../
+EXTRAINCDIRS = $(LUFA_PATH)/
# Compiler flag to set the C Standard level.
# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL -DBOARD=BOARD_$(BOARD) -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_STREAM_CALLBACKS
-CDEFS += -DUSB_DEVICE_ONLY -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
+CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
CDEFS += -DMAG_T1_CLOCK="(1 << 0)"
CDEFS += -DMAG_T1_DATA="(1 << 1)"
CDEFS += -DMAG_T2_CLOCK="(1 << 2)"
# Default target.
-all: begin gccversion sizebefore build checkhooks checklibmode sizeafter end
+all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
- @echo ----- End Unhooked LUFA Events -----
+ @echo ------------------------------------
checklibmode:
@echo
|| echo "No specific mode (both device and host mode allowable)."
@echo ------------------------------------
+checkboard:
+ @echo
+ @echo ---------- Selected Board ----------
+ @echo Selected board model is $(BOARD).
+ @echo ------------------------------------
+
# Display compiler version information.
gccversion :
@$(CC) --version
batchisp -hardware usb -device $(MCU) -operation start reset 0
dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
clean_binary:
$(REMOVE) $(TARGET).hex
-
+
clean_list:
@echo $(MSG_CLEANING)
$(REMOVE) $(TARGET).eep
+ $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
# Listing of phony targets.
-.PHONY : all checkhooks checklibmode begin \
-finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff \
-clean clean_list clean_binary program debug \
-gdb-config doxygen dfu flip
+.PHONY : all checkhooks checklibmode checkboard \
+begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff clean \
+clean_list clean_binary program debug gdb-config \
+doxygen dfu flip flip-ee dfu-ee
\ No newline at end of file
projects / pub / USBasp.git / blobdiff