Added new JTAG_ENABLE() macro for the AVR8 architecture. Fixed the JTAG_DISABLE(...

[pub/USBasp.git] / LUFA / Drivers / Peripheral / AVR8 / SPI_AVR8.h

diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index 2e396ed..3ca0376 100644 (file)
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -56,17 +56,17 @@
  *      // Initialize the SPI driver before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
  *      // Initialize the SPI driver before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);

- *
+ *      

  *      // Send several bytes, ignoring the returned data
  *      SPI_SendByte(0x01);
  *      SPI_SendByte(0x02);
  *      SPI_SendByte(0x03);
  *      // Send several bytes, ignoring the returned data
  *      SPI_SendByte(0x01);
  *      SPI_SendByte(0x02);
  *      SPI_SendByte(0x03);

- *
+ *      

  *      // Receive several bytes, sending a dummy 0x00 byte each time
  *      uint8_t Byte1 = SPI_ReceiveByte();
  *      uint8_t Byte2 = SPI_ReceiveByte();
  *      uint8_t Byte3 = SPI_ReceiveByte();
  *      // Receive several bytes, sending a dummy 0x00 byte each time
  *      uint8_t Byte1 = SPI_ReceiveByte();
  *      uint8_t Byte2 = SPI_ReceiveByte();
  *      uint8_t Byte3 = SPI_ReceiveByte();

- *
+ *      

  *      // Send a byte, and store the received byte from the same transaction
  *      uint8_t ResponseByte = SPI_TransferByte(0xDC);
  *  \endcode
  *      // Send a byte, and store the received byte from the same transaction
  *      uint8_t ResponseByte = SPI_TransferByte(0xDC);
  *  \endcode