Add support for ATmega168p CPU

[pub/USBasp.git] / bin / firmware / Makefile328

diff --git a/bin/firmware/Makefile328 b/bin/firmware/Makefile328
index f086528..3a71530 100644 (file)
--- a/bin/firmware/Makefile328
+++ b/bin/firmware/Makefile328
@@ -1,17 +1,24 @@
 MCU_TARGET     = atmega328p
 MCU_TARGET     = atmega328p

-F_CPU          = 16000000
+F_CPU          = 12000000

 FLASHER        = avrdude -c usbasp -p $(MCU_TARGET)
 
 usbasp: fuses
 ifeq ($(F_CPU), 12000000)
 FLASHER        = avrdude -c usbasp -p $(MCU_TARGET)
 
 usbasp: fuses
 ifeq ($(F_CPU), 12000000)

-       $(FLASHER) -B 1 -U flash:w:usbasp.atmega328-12MHz.2011-05-28.hex
+       $(FLASHER) -B 1 -U flash:w:usbasp.atmega328p-12MHz.hex

 else ifeq ($(F_CPU), 16000000)
 else ifeq ($(F_CPU), 16000000)

-       $(FLASHER) -B 1 -U flash:w:usbasp.atmega328-16MHz.2011-05-28.hex
+       $(FLASHER) -B 1 -U flash:w:usbasp.atmega328p-16MHz.hex
+else ifeq ($(F_CPU), 18000000)
+       $(FLASHER) -B 1 -U flash:w:usbasp.atmega328p-18MHz.hex

 else
        $(error setting of F_CPU is not supported.)
 endif
 
 fuses:
 else
        $(error setting of F_CPU is not supported.)
 endif
 
 fuses:

+ifeq ($(F_CPU), 18000000)
+       $(FLASHER) -B 300 -U lfuse:w:0xe7:m -U hfuse:w:0xd9:m -U efuse:w:0x05:m
+else

        $(FLASHER) -B 300 -U lfuse:w:0xef:m -U hfuse:w:0xd9:m -U efuse:w:0x05:m
        $(FLASHER) -B 300 -U lfuse:w:0xef:m -U hfuse:w:0xd9:m -U efuse:w:0x05:m

+endif
+

 shell:
        $(FLASHER) -B 200 -t
 shell:
        $(FLASHER) -B 200 -t