Demos/KeyboardHostWithParser/makefile

   1 # Hey Emacs, this is a -*- makefile -*-
   2 #----------------------------------------------------------------------------
   3 # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
   4 #  >> Modified for use with the LUFA project. <<
   5 #
   6 # Released to the Public Domain
   7 #
   8 # Additional material for this makefile was written by:
   9 # Peter Fleury
  10 # Tim Henigan
  11 # Colin O'Flynn
  12 # Reiner Patommel
  13 # Markus Pfaff
  14 # Sander Pool
  15 # Frederik Rouleau
  16 # Carlos Lamas
  17 # Dean Camera
  18 # Opendous Inc.
  19 # Denver Gingerich
  20 #
  21 #----------------------------------------------------------------------------
  22 # On command line:
  23 #
  24 # make all = Make software.
  25 #
  26 # make clean = Clean out built project files.
  27 #
  28 # make coff = Convert ELF to AVR COFF.
  29 #
  30 # make extcoff = Convert ELF to AVR Extended COFF.
  31 #
  32 # make program = Download the hex file to the device, using avrdude.
  33 #                Please customize the avrdude settings below first!
  34 #
  35 # make dfu = Download the hex file to the device, using dfu-programmer (must
  36 #            have dfu-programmer installed).
  37 #
  38 # make flip = Download the hex file to the device, using Atmel FLIP (must
  39 #             have Atmel FLIP installed).
  40 #
  41 # make dfu-ee = Download the eeprom file to the device, using dfu-programmer
  42 #               (must have dfu-programmer installed).
  43 #
  44 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
  45 #                (must have Atmel FLIP installed).
  46 #
  47 # make doxygen = Generate DoxyGen documentation for the project (must have
  48 #                DoxyGen installed)
  49 #
  50 # make debug = Start either simulavr or avarice as specified for debugging,
  51 #              with avr-gdb or avr-insight as the front end for debugging.
  52 #
  53 # make filename.s = Just compile filename.c into the assembler code only.
  54 #
  55 # make filename.i = Create a preprocessed source file for use in submitting
  56 #                   bug reports to the GCC project.
  57 #
  58 # To rebuild project do "make clean" then "make all".
  59 #----------------------------------------------------------------------------
  60
  61
  62 # MCU name
  63 MCU = at90usb1287
  64
  65
  66 # Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring
  67 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called
  68 # "Board" inside the application directory.
  69 BOARD  = USBKEY
  70
  71
  72 # Processor frequency.
  73 #     This will define a symbol, F_CPU, in all source code files equal to the
  74 #     processor frequency. You can then use this symbol in your source code to
  75 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
  76 #     automatically to create a 32-bit value in your source code.
  77 #     Typical values are:
  78 #         F_CPU =  1000000
  79 #         F_CPU =  1843200
  80 #         F_CPU =  2000000
  81 #         F_CPU =  3686400
  82 #         F_CPU =  4000000
  83 #         F_CPU =  7372800
  84 #         F_CPU =  8000000
  85 #         F_CPU = 11059200
  86 #         F_CPU = 14745600
  87 #         F_CPU = 16000000
  88 #         F_CPU = 18432000
  89 #         F_CPU = 20000000
  90 F_CPU = 8000000
  91
  92
  93 # Output format. (can be srec, ihex, binary)
  94 FORMAT = ihex
  95
  96
  97 # Target file name (without extension).
  98 TARGET = KeyboardHostWithParser
  99
 100
 101 # Object files directory
 102 #     To put object files in current directory, use a dot (.), do NOT make
 103 #     this an empty or blank macro!
 104 OBJDIR = .
 105
 106
 107 # List C source files here. (C dependencies are automatically generated.)
 108 SRC = $(TARGET).c                                          \
 109           ConfigDescriptor.c                                   \
 110           HIDReport.c                                          \
 111           ../../LUFA/Scheduler/Scheduler.c                     \
 112           ../../LUFA/Drivers/AT90USBXXX/Serial_Stream.c        \
 113           ../../LUFA/Drivers/AT90USBXXX/Serial.c               \
 114           ../../LUFA/Drivers/USB/Class/HIDParser.c             \
 115           ../../LUFA/Drivers/USB/Class/ConfigDescriptor.c      \
 116           ../../LUFA/Drivers/USB/LowLevel/LowLevel.c           \
 117           ../../LUFA/Drivers/USB/LowLevel/Pipe.c               \
 118           ../../LUFA/Drivers/USB/LowLevel/Host.c               \
 119           ../../LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
 120           ../../LUFA/Drivers/USB/HighLevel/USBTask.c           \
 121           ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c      \
 122           ../../LUFA/Drivers/USB/HighLevel/Events.c            \
 123
 124 # List C++ source files here. (C dependencies are automatically generated.)
 125 CPPSRC =
 126
 127
 128 # List Assembler source files here.
 129 #     Make them always end in a capital .S.  Files ending in a lowercase .s
 130 #     will not be considered source files but generated files (assembler
 131 #     output from the compiler), and will be deleted upon "make clean"!
 132 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 133 #     it will preserve the spelling of the filenames, and gcc itself does
 134 #     care about how the name is spelled on its command-line.
 135 ASRC =
 136
 137
 138 # Optimization level, can be [0, 1, 2, 3, s].
 139 #     0 = turn off optimization. s = optimize for size.
 140 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 141 OPT = s
 142
 143
 144 # Debugging format.
 145 #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
 146 #     AVR Studio 4.10 requires dwarf-2.
 147 #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
 148 DEBUG = dwarf-2
 149
 150
 151 # List any extra directories to look for include files here.
 152 #     Each directory must be seperated by a space.
 153 #     Use forward slashes for directory separators.
 154 #     For a directory that has spaces, enclose it in quotes.
 155 EXTRAINCDIRS = ../../
 156
 157
 158 # Compiler flag to set the C Standard level.
 159 #     c89   = "ANSI" C
 160 #     gnu89 = c89 plus GCC extensions
 161 #     c99   = ISO C99 standard (not yet fully implemented)
 162 #     gnu99 = c99 plus GCC extensions
 163 CSTANDARD = -std=gnu99
 164
 165
 166 # Place -D or -U options here for C sources
 167 CDEFS  = -DF_CPU=$(F_CPU)UL -DBOARD=BOARD_$(BOARD) -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_STREAM_CALLBACKS
 168 CDEFS += -DUSB_HOST_ONLY -DUSE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 169
 170
 171 # Place -D or -U options here for ASM sources
 172 ADEFS = -DF_CPU=$(F_CPU)
 173
 174
 175 # Place -D or -U options here for C++ sources
 176 CPPDEFS = -DF_CPU=$(F_CPU)UL
 177 #CPPDEFS += -D__STDC_LIMIT_MACROS
 178 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 179
 180
 181
 182 #---------------- Compiler Options C ----------------
 183 #  -g*:          generate debugging information
 184 #  -O*:          optimization level
 185 #  -f...:        tuning, see GCC manual and avr-libc documentation
 186 #  -Wall...:     warning level
 187 #  -Wa,...:      tell GCC to pass this to the assembler.
 188 #    -adhlns...: create assembler listing
 189 CFLAGS = -g$(DEBUG)
 190 CFLAGS += $(CDEFS)
 191 CFLAGS += -O$(OPT)
 192 CFLAGS += -funsigned-char
 193 CFLAGS += -funsigned-bitfields
 194 CFLAGS += -ffunction-sections
 195 CFLAGS += -fpack-struct
 196 CFLAGS += -fshort-enums
 197 CFLAGS += -finline-limit=20
 198 CFLAGS += -Wall
 199 CFLAGS += -Wstrict-prototypes
 200 CFLAGS += -Wundef
 201 #CFLAGS += -fno-unit-at-a-time
 202 #CFLAGS += -Wunreachable-code
 203 #CFLAGS += -Wsign-compare
 204 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 205 CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 206 CFLAGS += $(CSTANDARD)
 207
 208
 209 #---------------- Compiler Options C++ ----------------
 210 #  -g*:          generate debugging information
 211 #  -O*:          optimization level
 212 #  -f...:        tuning, see GCC manual and avr-libc documentation
 213 #  -Wall...:     warning level
 214 #  -Wa,...:      tell GCC to pass this to the assembler.
 215 #    -adhlns...: create assembler listing
 216 CPPFLAGS = -g$(DEBUG)
 217 CPPFLAGS += $(CPPDEFS)
 218 CPPFLAGS += -O$(OPT)
 219 CPPFLAGS += -funsigned-char
 220 CPPFLAGS += -funsigned-bitfields
 221 CPPFLAGS += -fpack-struct
 222 CPPFLAGS += -fshort-enums
 223 CPPFLAGS += -fno-exceptions
 224 CPPFLAGS += -Wall
 225 CFLAGS += -Wundef
 226 #CPPFLAGS += -mshort-calls
 227 #CPPFLAGS += -fno-unit-at-a-time
 228 #CPPFLAGS += -Wstrict-prototypes
 229 #CPPFLAGS += -Wunreachable-code
 230 #CPPFLAGS += -Wsign-compare
 231 CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
 232 CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 233 #CPPFLAGS += $(CSTANDARD)
 234
 235
 236 #---------------- Assembler Options ----------------
 237 #  -Wa,...:   tell GCC to pass this to the assembler.
 238 #  -adhlns:   create listing
 239 #  -gstabs:   have the assembler create line number information; note that
 240 #             for use in COFF files, additional information about filenames
 241 #             and function names needs to be present in the assembler source
 242 #             files -- see avr-libc docs [FIXME: not yet described there]
 243 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 244 #       dump that will be displayed for a given single line of source input.
 245 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 246
 247
 248 #---------------- Library Options ----------------
 249 # Minimalistic printf version
 250 PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 251
 252 # Floating point printf version (requires MATH_LIB = -lm below)
 253 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 254
 255 # If this is left blank, then it will use the Standard printf version.
 256 PRINTF_LIB =
 257 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 258 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 259
 260
 261 # Minimalistic scanf version
 262 SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 263
 264 # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
 265 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 266
 267 # If this is left blank, then it will use the Standard scanf version.
 268 SCANF_LIB =
 269 #SCANF_LIB = $(SCANF_LIB_MIN)
 270 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 271
 272
 273 MATH_LIB = -lm
 274
 275
 276 # List any extra directories to look for libraries here.
 277 #     Each directory must be seperated by a space.
 278 #     Use forward slashes for directory separators.
 279 #     For a directory that has spaces, enclose it in quotes.
 280 EXTRALIBDIRS =
 281
 282
 283
 284 #---------------- External Memory Options ----------------
 285
 286 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 287 # used for variables (.data/.bss) and heap (malloc()).
 288 #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
 289
 290 # 64 KB of external RAM, starting after internal RAM (ATmega128!),
 291 # only used for heap (malloc()).
 292 #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
 293
 294 EXTMEMOPTS =
 295
 296
 297
 298 #---------------- Linker Options ----------------
 299 #  -Wl,...:     tell GCC to pass this to linker.
 300 #    -Map:      create map file
 301 #    --cref:    add cross reference to  map file
 302 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
 303 LDFLAGS += -Wl,--relax
 304 LDFLAGS += -Wl,--gc-sections
 305 LDFLAGS += $(EXTMEMOPTS)
 306 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 307 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 308 #LDFLAGS += -T linker_script.x
 309
 310
 311
 312 #---------------- Programming Options (avrdude) ----------------
 313
 314 # Programming hardware: alf avr910 avrisp bascom bsd
 315 # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
 316 #
 317 # Type: avrdude -c ?
 318 # to get a full listing.
 319 #
 320 AVRDUDE_PROGRAMMER = jtagmkII
 321
 322 # com1 = serial port. Use lpt1 to connect to parallel port.
 323 AVRDUDE_PORT = usb
 324
 325 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 326 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
 327
 328
 329 # Uncomment the following if you want avrdude's erase cycle counter.
 330 # Note that this counter needs to be initialized first using -Yn,
 331 # see avrdude manual.
 332 #AVRDUDE_ERASE_COUNTER = -y
 333
 334 # Uncomment the following if you do /not/ wish a verification to be
 335 # performed after programming the device.
 336 #AVRDUDE_NO_VERIFY = -V
 337
 338 # Increase verbosity level.  Please use this when submitting bug
 339 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 340 # to submit bug reports.
 341 #AVRDUDE_VERBOSE = -v -v
 342
 343 AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
 344 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 345 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 346 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 347
 348
 349
 350 #---------------- Debugging Options ----------------
 351
 352 # For simulavr only - target MCU frequency.
 353 DEBUG_MFREQ = $(F_CPU)
 354
 355 # Set the DEBUG_UI to either gdb or insight.
 356 # DEBUG_UI = gdb
 357 DEBUG_UI = insight
 358
 359 # Set the debugging back-end to either avarice, simulavr.
 360 DEBUG_BACKEND = avarice
 361 #DEBUG_BACKEND = simulavr
 362
 363 # GDB Init Filename.
 364 GDBINIT_FILE = __avr_gdbinit
 365
 366 # When using avarice settings for the JTAG
 367 JTAG_DEV = /dev/com1
 368
 369 # Debugging port used to communicate between GDB / avarice / simulavr.
 370 DEBUG_PORT = 4242
 371
 372 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 373 #     just set to localhost unless doing some sort of crazy debugging when
 374 #     avarice is running on a different computer.
 375 DEBUG_HOST = localhost
 376
 377
 378
 379 #============================================================================
 380
 381
 382 # Define programs and commands.
 383 SHELL = sh
 384 CC = avr-gcc
 385 OBJCOPY = avr-objcopy
 386 OBJDUMP = avr-objdump
 387 SIZE = avr-size
 388 AR = avr-ar rcs
 389 NM = avr-nm
 390 AVRDUDE = avrdude
 391 REMOVE = rm -f
 392 REMOVEDIR = rm -rf
 393 COPY = cp
 394 WINSHELL = cmd
 395
 396 # Define Messages
 397 # English
 398 MSG_ERRORS_NONE = Errors: none
 399 MSG_BEGIN = -------- begin --------
 400 MSG_END = --------  end  --------
 401 MSG_SIZE_BEFORE = Size before:
 402 MSG_SIZE_AFTER = Size after:
 403 MSG_COFF = Converting to AVR COFF:
 404 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 405 MSG_FLASH = Creating load file for Flash:
 406 MSG_EEPROM = Creating load file for EEPROM:
 407 MSG_EXTENDED_LISTING = Creating Extended Listing:
 408 MSG_SYMBOL_TABLE = Creating Symbol Table:
 409 MSG_LINKING = Linking:
 410 MSG_COMPILING = Compiling C:
 411 MSG_COMPILING_CPP = Compiling C++:
 412 MSG_ASSEMBLING = Assembling:
 413 MSG_CLEANING = Cleaning project:
 414 MSG_CREATING_LIBRARY = Creating library:
 415
 416
 417
 418
 419 # Define all object files.
 420 OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 421
 422 # Define all listing files.
 423 LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 424
 425
 426 # Compiler flags to generate dependency files.
 427 GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
 428
 429
 430 # Combine all necessary flags and optional flags.
 431 # Add target processor to flags.
 432 ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
 433 ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
 434 ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 435
 436
 437
 438
 439
 440 # Default target.
 441 all: begin gccversion sizebefore build checkhooks checklibmode sizeafter end
 442
 443 # Change the build target to build a HEX file or a library.
 444 build: elf hex eep lss sym
 445 #build: lib
 446
 447
 448 elf: $(TARGET).elf
 449 hex: $(TARGET).hex
 450 eep: $(TARGET).eep
 451 lss: $(TARGET).lss
 452 sym: $(TARGET).sym
 453 LIBNAME=lib$(TARGET).a
 454 lib: $(LIBNAME)
 455
 456
 457
 458 # Eye candy.
 459 # AVR Studio 3.x does not check make's exit code but relies on
 460 # the following magic strings to be generated by the compile job.
 461 begin:
 462         @echo
 463         @echo $(MSG_BEGIN)
 464
 465 end:
 466         @echo $(MSG_END)
 467         @echo
 468
 469
 470 # Display size of file.
 471 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
 472 ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 473 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 474 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 475
 476 sizebefore:
 477         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
 478         2>/dev/null; echo; fi
 479
 480 sizeafter:
 481         @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 482         2>/dev/null; echo; fi
 483
 484 checkhooks: build
 485         @echo
 486         @echo ------- Unhooked LUFA Events -------
 487         @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
 488                    cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
 489                            echo "(None)"
 490         @echo ----- End Unhooked LUFA Events -----
 491
 492 checklibmode:
 493         @echo
 494         @echo ----------- Library Mode -----------
 495         @$(shell) ($(CC) $(ALL_CFLAGS) -E -dM - < /dev/null \
 496                   | grep 'USB_\(DEVICE\|HOST\)_ONLY' | cut -d' ' -f2 | grep ".*") \
 497                   || echo "No specific mode (both device and host mode allowable)."
 498         @echo ------------------------------------
 499
 500 # Display compiler version information.
 501 gccversion :
 502         @$(CC) --version
 503
 504
 505
 506 # Program the device.
 507 program: $(TARGET).hex $(TARGET).eep
 508         $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 509
 510 flip: $(TARGET).hex
 511         batchisp -hardware usb -device $(MCU) -operation erase f
 512         batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
 513         batchisp -hardware usb -device $(MCU) -operation start reset 0
 514
 515 dfu: $(TARGET).hex
 516         dfu-programmer $(MCU) erase
 517         dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
 518         dfu-programmer $(MCU) reset
 519
 520 flip-ee: $(TARGET).hex $(TARGET).eep
 521         copy $(TARGET).eep $(TARGET)eep.hex
 522         batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
 523         batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
 524         batchisp -hardware usb -device $(MCU) -operation start reset 0
 525
 526 dfu-ee: $(TARGET).hex $(TARGET).eep
 527         dfu-programmer $(MCU) erase
 528         dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep
 529         dfu-programmer $(MCU) reset
 530
 531 # Generate avr-gdb config/init file which does the following:
 532 #     define the reset signal, load the target file, connect to target, and set
 533 #     a breakpoint at main().
 534 gdb-config:
 535         @$(REMOVE) $(GDBINIT_FILE)
 536         @echo define reset >> $(GDBINIT_FILE)
 537         @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
 538         @echo end >> $(GDBINIT_FILE)
 539         @echo file $(TARGET).elf >> $(GDBINIT_FILE)
 540         @echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
 541 ifeq ($(DEBUG_BACKEND),simulavr)
 542         @echo load  >> $(GDBINIT_FILE)
 543 endif
 544         @echo break main >> $(GDBINIT_FILE)
 545
 546 debug: gdb-config $(TARGET).elf
 547 ifeq ($(DEBUG_BACKEND), avarice)
 548         @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
 549         @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
 550         $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
 551         @$(WINSHELL) /c pause
 552
 553 else
 554         @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
 555         $(DEBUG_MFREQ) --port $(DEBUG_PORT)
 556 endif
 557         @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
 558
 559
 560
 561
 562 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 563 COFFCONVERT = $(OBJCOPY) --debugging
 564 COFFCONVERT += --change-section-address .data-0x800000
 565 COFFCONVERT += --change-section-address .bss-0x800000
 566 COFFCONVERT += --change-section-address .noinit-0x800000
 567 COFFCONVERT += --change-section-address .eeprom-0x810000
 568
 569
 570
 571 coff: $(TARGET).elf
 572         @echo
 573         @echo $(MSG_COFF) $(TARGET).cof
 574         $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
 575
 576
 577 extcoff: $(TARGET).elf
 578         @echo
 579         @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
 580         $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
 581
 582
 583
 584 # Create final output files (.hex, .eep) from ELF output file.
 585 %.hex: %.elf
 586         @echo
 587         @echo $(MSG_FLASH) $@
 588         $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 589
 590 %.eep: %.elf
 591         @echo
 592         @echo $(MSG_EEPROM) $@
 593         -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
 594         --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
 595
 596 # Create extended listing file from ELF output file.
 597 %.lss: %.elf
 598         @echo
 599         @echo $(MSG_EXTENDED_LISTING) $@
 600         $(OBJDUMP) -h -z -S $< > $@
 601
 602 # Create a symbol table from ELF output file.
 603 %.sym: %.elf
 604         @echo
 605         @echo $(MSG_SYMBOL_TABLE) $@
 606         $(NM) -n $< > $@
 607
 608
 609
 610 # Create library from object files.
 611 .SECONDARY : $(TARGET).a
 612 .PRECIOUS : $(OBJ)
 613 %.a: $(OBJ)
 614         @echo
 615         @echo $(MSG_CREATING_LIBRARY) $@
 616         $(AR) $@ $(OBJ)
 617
 618
 619 # Link: create ELF output file from object files.
 620 .SECONDARY : $(TARGET).elf
 621 .PRECIOUS : $(OBJ)
 622 %.elf: $(OBJ)
 623         @echo
 624         @echo $(MSG_LINKING) $@
 625         $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
 626
 627
 628 # Compile: create object files from C source files.
 629 $(OBJDIR)/%.o : %.c
 630         @echo
 631         @echo $(MSG_COMPILING) $<
 632         $(CC) -c $(ALL_CFLAGS) $< -o $@
 633
 634
 635 # Compile: create object files from C++ source files.
 636 $(OBJDIR)/%.o : %.cpp
 637         @echo
 638         @echo $(MSG_COMPILING_CPP) $<
 639         $(CC) -c $(ALL_CPPFLAGS) $< -o $@
 640
 641
 642 # Compile: create assembler files from C source files.
 643 %.s : %.c
 644         $(CC) -S $(ALL_CFLAGS) $< -o $@
 645
 646
 647 # Compile: create assembler files from C++ source files.
 648 %.s : %.cpp
 649         $(CC) -S $(ALL_CPPFLAGS) $< -o $@
 650
 651
 652 # Assemble: create object files from assembler source files.
 653 $(OBJDIR)/%.o : %.S
 654         @echo
 655         @echo $(MSG_ASSEMBLING) $<
 656         $(CC) -c $(ALL_ASFLAGS) $< -o $@
 657
 658
 659 # Create preprocessed source for use in sending a bug report.
 660 %.i : %.c
 661         $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 662
 663
 664 ## Target: clean project.
 665 clean: begin clean_list clean_binary end
 666
 667 clean_binary:
 668         $(REMOVE) $(TARGET).hex
 669
 670 clean_list:
 671         @echo $(MSG_CLEANING)
 672         $(REMOVE) $(TARGET).eep
 673         $(REMOVE) $(TARGET).cof
 674         $(REMOVE) $(TARGET).elf
 675         $(REMOVE) $(TARGET).map
 676         $(REMOVE) $(TARGET).sym
 677         $(REMOVE) $(TARGET).lss
 678         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
 679         $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
 680         $(REMOVE) $(SRC:.c=.s)
 681         $(REMOVE) $(SRC:.c=.d)
 682         $(REMOVE) $(SRC:.c=.i)
 683         $(REMOVEDIR) .dep
 684
 685
 686 doxygen:
 687         @echo Generating Project Documentation...
 688         @doxygen Doxygen.conf
 689         @echo Documentation Generation Complete.
 690
 691 clean_doxygen:
 692         rm -rf Documentation
 693
 694 # Create object files directory
 695 $(shell mkdir $(OBJDIR) 2>/dev/null)
 696
 697
 698 # Include the dependency files.
 699 -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
 700
 701
 702 # Listing of phony targets.
 703 .PHONY : all checkhooks checklibmode begin  \
 704 finish end sizebefore sizeafter gccversion  \
 705 build elf hex eep lss sym coff extcoff      \
 706 clean clean_list clean_binary program debug \
 707 gdb-config doxygen dfu flip